Independent Mechanical Engineering Development Engineer
Herrenknecht Vertikal GmbH (Herrenknecht AG)
Development and design of a new oil drilling machine for the Beatrice oil rig, Scotland. Concept development of the Pipe-Overdeck work platform with crane, total load 200 tons, static FEM calculation and CFD flow analysis for safe drainage of oil-contaminated wastewater. (CAD: CREO, Model Manager, SAP)
Apr 2024 - Present
1 year 4 months
Sonneberg, Germany
Independent Mechanical Engineering Development Engineer
Martin Membrane Systems AG
Development of a new variant, design modifications and preparation of technical drawings for a wastewater lifting system, MARTIM division, eco-filter systems and stainless steel VA4 installations for cruise ships like AIDA. (CAD: HiCAD)
Mar 2024 - Present
1 year 5 months
Vienna, Austria
Independent Mechanical Engineering Development Engineer
Otto Bock Healthcare Products GmbH
Development and design, drawing derivation and qualification (QS, MSA) of new fixtures and tools for manufacturing, measuring and quality assurance of complex mechatronic prostheses. Prototype development and 3D printing as well as contracting tool manufacturing. (CAD: CREO, Windchill, SAP)
Feb 2024 - May 2024
4 months
Radebeul, Germany
Independent Mechanical Engineering Development Engineer
LTB Leitungsbau GmbH
Planning and 3D CAD implementation of masts for overhead lines.
We supported Netze BW (Baden-Württemberg) in planning and expanding the overhead power line of the Südlink route (wind energy from the North Sea to Baden-Württemberg).
(CAD: AutoCAD)
Aug 2023 - Nov 2023
4 months
Hamburg, Germany
Independent Mechanical Engineering Development Engineer
SICK AG
Concept development and CAD design of a housing cover for an RFID sensor.
RFID sensor: first device of the new product generation, housing made of special high-strength technical plastic (50% fiberglass).
Development and design considering electrical functions like the EK resonator and manufacturing processes. (CAD: Siemens NX 2206 and SolidWorks).
Jun 2023 - Feb 2024
9 months
Vienna, Austria
Independent Mechanical Engineer: Project Management / Systems Engineer for Door Systems and Couplings
Alstom Transportation GmbH
Review, correction and change management of designs, drawings and associated documentation.
Development of new solution variants and feasibility studies.
Communication of change requests with customers and suppliers.
Complete commissioning of doors, type test/first development vehicle in mechanics, electronics and software/control unit.
Support for international customers and suppliers.
Responsible for projects BVG2020 Berlin, Magdeburg, Duisburg, Essen, Düsseldorf, Cologne and Gothenburg.
Support and assistance for approval/authorization for tests in shock and vibration, fire protection, corrosion protection. (CAD: CATIA).
Oct 2022 - Jul 2023
10 months
Berlin, Germany
Independent Mechanical Engineering Development Engineer
Stadler Deutschland GmbH
IBS commissioning of rail vehicles.
Inspection, QKT, error correction of electromechanical components, software and power electronics, and handover of trains to customers (DB, VBB).
Oct 2022 - Apr 2023
7 months
Ottendorf-Okrilla, Germany
Independent Mechanical Engineering Development Engineer
SICK AG
Concept development of an LNG gas meter.
CAD design, CAE simulation (CFD, FEM and thermal).
Development of a solution to break the thermal bridge in the cryogenic area, from –170 °C inside the gas meter where liquid gas flows to up to +60 °C outside, e.g. in Abu Dhabi. Use of ceramic (zirconia) as an insulator. Results of our CAE simulations were confirmed by the Dresden Cold Institute in comprehensive real-world tests. (CAD: SolidWorks)
Jun 2022 - Present
3 years 2 months
Zürich, Switzerland
Independent Mechanical Engineering Development Engineer
Prolim Engineering GmbH
Variant development, FEM calculation and CAD design of a vertical saw machine.
CAD: SolidWorks 2019 + 2022
Feb 2022 - Present
3 years 6 months
Hamburg, Germany
Independent Mechanical Engineering Development Engineer
Hauni Maschinenbau GmbH
Development and CAD design of a production machine for manufacturing battery cells/e-vehicles.
CAD: Siemens NX 12 + NX 1980; TeamCenter; SAP
Dec 2020 - Jan 2022
1 year 2 months
Lorem ipsum dolor sit amet
Elternzeit
Further training: Business English online course.
Oct 2017 - Nov 2020
3 years 2 months
Berlin, Germany
Consultant for CAD/PLM Process Optimization, Designer
ISD Group
Technical consulting lead in field service, CAD instructor.
Support for the branch manager, HiCAD, Civil 3D.
Representation of ISD Group at trade fairs.
Jun 2015 - Apr 2017
1 year 11 months
Berlin, Germany
Designer/Developer for Packaging Machines
H.-H. Focke GmbH & Co. KG
Development/design of (precision) mechanical parts and complex assemblies in packaging technology.
Drawing derivation and document management in SAP.
Sizing, selection and installation of sensors, electrical and pneumatic components.
IT interface.
Conversion after format change.
Meetings and interdisciplinary collaboration.
Creation of solution variants, optimization, evaluation and presentation of results.
CAD: Solid Edge ST6 and ST8; TeamCenter; SAP
Jul 2013 - Jan 2015
1 year 7 months
Hamburg, Germany
Designer/Development Engineer
Alfons Haar Maschinenbau GmbH & Co. KG
Concept development and design of a can manufacturing machine, special machine construction.
Selection of motor and belt drive.
CAD: Pro/E Wildfire 3 with Infor database system.
(Project via Oswald Iden GmbH & Co. KG, Hamburg)
Jul 2013 - Jan 2015
1 year 7 months
Wedel, Germany
Designer/Development Engineer
Evac GmbH
Development/design and revision of sanitary systems and water tanks in rail vehicle technology.
Concept, design, manufacture and installation of a test bench for tank measurement, 3D measurement technology QS.
CAD: Pro/E Wildfire 5.0; PTC Windchill; SAP.
(Project via Oswald Iden GmbH & Co. KG, Hamburg)
Jul 2013 - Jan 2015
1 year 7 months
Hamburg, Germany
Designer/Development Engineer
Montblanc GmbH
Design, correction and approval of 3D models and drawings for luxury writing instruments.
Support of key user in implementing new CAD/PDM/SAP systems.
CAD: Siemens NX7.5; TeamCenter; SAP.
(Project via Oswald Iden GmbH & Co. KG, Hamburg)
Jul 2013 - Jan 2015
1 year 7 months
Hamburg, Germany
Designer/Development Engineer
SICK AG
Concept development of a sheet metal housing for a gas meter with Ex-protection for Zone 1 in metrology.
Presentation of results and participation in component selection.
Design of a functional model and prototype and drawing derivation.
Vendor and designer coordination.
CAD: Creo Elements Direct Modeling; Windchill; SAP.
(Project via Oswald Iden GmbH & Co. KG, Hamburg)
Jan 2012 - Jun 2013
1 year 6 months
Hamburg, Germany
Designer/Developer for 5-Axis CNC Grinding Machines
Hauni / Blohm & Jung
Design, documentation, optimization and further development of a CNC grinding machine for processing turbine blades and engine components for aircraft and gas turbines.
Sheet metal design of machine covers.
Display of the machine at Hanover Fair 2014.
CAD: Siemens NX7.5; TeamCenter; SAP.
(Project via Hays AG)
Jan 2012 - Jun 2013
1 year 6 months
Oberhausen, Germany
Designer for Gas Turbines
MAN Diesel & Turbo
Design of gas turbine components as 3D models, I-Deas to Siemens NX.
Dimensioning of standard parts and drawing derivation.
Welding design and prototype for telemetry measurement systems.
CAD: Siemens NX6; I-Deas; SAP/ECTR.
(Project via Hays AG)
Jan 2011 - Aug 2011
8 months
Gelsenkirchen, Germany
Student Assistant
University of Applied Sciences Gelsenkirchen, Institute of Mechanical Engineering
Research project of the state of NRW in cooperation with the automotive industry (BMW/VW).
Creation of an experimental plan based on previous research findings.
Investigation of a newly developed smooth rolling tool and its application limits.
Conducting tests on a Gildemeister CNC lathe; control via Siemens 840D.
Measurements of form and position tolerances in the measurement lab.
Analysis and presentation of results using Q-Destra research software.
CAD/CAM: Siemens NX
Nov 2009 - Dec 2010
1 year 2 months
Augsburg, Germany
Construction Supervisor for Steel Construction (Working Student)
Kessler und Rupp, Engineering Office for Planning and Construction Management
Construction project: new building of University of Applied Sciences Gelsenkirchen, construction cost €40 million, responsibility €0.5 million.
Site supervision for welded steel and metal structures, fire doors, railings and stair constructions.
Preparation and participation in fixed-schedule meetings.
Measurement checks, invoice verification, quality control and final inspections.
On behalf of the state property management of NRW.
Oct 2008 - Jun 2009
9 months
Bochum, Germany
Internship in Rail Vehicle Design/Development
Bochumer Verein Verkehrstechnik GmbH
Preparation of a concept study for designing a test rig for dynamic testing of wheelset components.
Analysis of existing test rigs for wheelset component approvals at Deutsche Bahn AG.
Evaluation based on requirements list.
Design of the component using Pro/Engineer Wildfire 3 and Inventor.
FEA/FEM analysis of structural parts with ANSYS/ABAQUS.
Simulation and testing of functionality.
Mar 2006 - Sep 2006
7 months
Herten, Germany
Working Student in Automation / Production Support
ISRA VISION AG
Interface between design and production.
Control cabinet assembly, electromechanical processing.
Assembly of optical scanner inspection machines for the glass industry (Pilkington Automotive Deutschland GmbH).
Sep 2002 - Oct 2008
6 years 2 months
Gelsenkirchen, Germany
Industrial Mechanic / Fitter / Working Student
Rüding Schweißtechnik GmbH
Project and overhaul work for conveyor technology, plant, steel, boiler and pipeline construction.
Project assignments in ThyssenKrupp AG steelworks in Oberhausen, Bochum and Duisburg, AURUBIS AG copper plant in Lünen, Wacker Chemie AG in Cologne, BASF AG in Antwerp/Belgium, INEOS AG in Gladbeck and RWE power plant in Hamm (Westf.).
Jun 2000 - Feb 2001
9 months
Dorsten, Germany
Industrial Mechanic
DSK Deutsche Steinkohle AG
Maintenance, servicing and repair of various water pumps and conveyor systems.