For a project in the power plant environment, a freelance specialist for the migration and adaptation of the ABB 800xA control system is needed at short notice. - Typical tasks in this role:** - Implementation of programming and commissioning with the ABB 800xA process control system. - Migration of existing control system logic to the new system version, including adaptation of controllers and I/O modules. - Creation and adjustment of process graphics, operator interfaces, and alarm management configurations. - Execution of system tests, error analysis, and performance optimizations to ensure plant availability and control capability. - Technical support for operations staff during commissioning and ramp-up phases. - Preparation and maintenance of technical documentation (functional diagrams, configuration descriptions, test reports). - Close cooperation with process engineering, electrical engineering, and the plant operator.

A company is looking for a specialist site manager in electrical engineering as well as a specialist site manager for control systems (Siemens T3000) for a demanding project. The goal of the project is the technical supervision and control of the control system interfaces of the existing plant during the integration of the new plant, as well as ensuring quality and contract compliance during the construction and commissioning phase. The role requires intensive coordination and monitoring of interfaces with construction planning due to the size of the project. The site manager will work closely with control system specialists, planners, experts, and contractors to ensure the successful implementation of the project. Main responsibilities: - Technical supervision of the control system interfaces of the existing plant during the integration of the new plant - Technical management of control system specialists, planners, experts, and contractors - Creation of discipline-specific and project phase–dependent documents - Participation in project meetings and negotiations - Technical management of quality assurance and quality control during the construction and commissioning phase - Advising on control system commissioning - Technical coordination with planning engineers on quality monitoring tasks - Monitoring contract compliance and conducting quality inspections - Participation in safety meetings and implementation of measures to address identified deficiencies

A company is seeking support for a project aimed at transparently mapping the overall ordering process in the Portals area. The goal is to combine relevant data sources from order to activation to enable a holistic view of the end-to-end process. This should facilitate the identification of process deviations and optimization potentials. Key project milestones include connecting the required data sources, building self-service reports, and implementing automated alerts for deviations in the process flow. The challenge lies in the technical and professional integration of heterogeneous systems and data flows to ensure consistent monitoring and control of the ordering process. - Analysis and documentation of requirements in the Omnichannel area using requirements management tools and structured collection methods - Professional and technical analysis of existing data sources and ETL processes using database tools - Recording and evaluation of existing interfaces between source and target systems based on technical documentation - Consulting on technical integration of defined data sources into the Celonis environment considering the tools used (Celonis EMS, Data Pool and Data Push API) - Creation of technical queries and representations for process visualization based on provided platform functions (Celonis PQL, Studio) - Use of system-side functions for visualization and analysis of existing business processes (via Celonis Process Explorer) - Professional consulting on technical interfaces, data provision and systemic requirements

A company is looking for a Siemens PLC Programmer to support a hybrid setup in Siegen. The project focuses on programming and optimizing Siemens PLC systems, particularly within the steel industry. The role requires expertise in S120 and G120 servo drives. The ideal candidate should live close to Siegen to facilitate on-site work when required. Key responsibilities: - Programming and optimizing Siemens PLC systems. - Working with S120 and G120 servo drives. - Collaborating with the team to ensure smooth operations in a hybrid setup. - Troubleshooting and resolving technical issues. - Ensuring compliance with industry standards and safety regulations.

Typical tasks: - Analyze existing insurance processes and identify digitization potential - Gather and document business requirements together with the business departments - Create solution concepts for digital transformation (including process modeling and cost-benefit analyses) - Act as a liaison between business and IT: translate requirements into technical designs and support implementation - Support project management in planning and rolling out new digital solutions (agile methods like Scrum/Kanban) Relevant tools & technologies: BPMN modeling tools (e.g. Visio, Signavio), requirements management (Jira, Confluence), knowledge of common insurance IT systems, MS Office KPIs & metrics: meeting project milestones and budgets, reducing process cycle times, improving customer satisfaction/user acceptance, cutting manual efforts through automation Challenges: coordinating diverse stakeholders in the insurance environment (business units, IT, regulators), integrating new digital solutions into legacy systems, handling regulatory requirements and data protection, change management and user adoption Deliverables: comprehensive requirements documents and process models, detailed business concepts and user stories for IT implementation, defined implementation roadmap, training materials for updated processes Lessons learned: early involvement of all stakeholders makes it easier to carry out digitization projects; iterative, agile approaches allow flexible adjustments; deep industry knowledge (products, regulations) is crucial to design effective digital solutions

- Carrying out and handling switching processes (supplier change, new setup, move-in/move-out) - Independently handling clarification cases with analysis of rejection reasons and follow-up - Supporting market communication and related areas (e.g., meter reading, billing) at least at 2nd-level support - Ensuring smooth operations within energy industry processes

We are looking for an experienced consultant for a process and project initiative in Asset P&L (Profit and Loss) at a leading international financial services provider. - Typical responsibilities in this role:** - Analyze and document existing end-to-end P&L processes for various asset classes (e.g. equities, fixed income, derivatives). - Identify weaknesses, risks, and inefficiencies in data collection, processing, and reporting. - Design and plan optimized target processes for P&L calculation and attribution. - Prepare functional specs and business requirements for adapting or implementing IT systems (e.g. P&L engines, data warehouses). - Manage project implementation of new processes and tools, including milestone planning, stakeholder management, and test coordination. - Develop control mechanisms to ensure data quality and consistency. - Create training materials and lead workshops for business units (trading, controlling, risk). - Relevant technologies, tools, or methods:** - Advanced Analytics: MS Excel (Pivot, Power Query, VBA), SQL. - Business Intelligence: Tableau, Power BI, Qlik. - Project Management: Jira, Confluence, MS Project. - ERP/Finance Systems: SAP FI/CO, Oracle Financials, or industry-specific asset management platforms. - Methods: Business Process Model and Notation (BPMN 2.0), agile project management (Scrum/Kanban). - Typical KPIs or success metrics:** - P&L cycle time reduction: target >25% efficiency gain. - Reduction of manual correction entries: target >50% decrease through process automation. - Data quality index: increase first-time-right data acceptance rate to >99%. - Efficiency ratio (cost-to-income): demonstrate a positive impact on lowering the ratio. - User adoption rate: >80% acceptance of new processes/tools by business units after 3 months. - Key challenges, risks, or specifics:** - Heterogeneous system landscape and inconsistent data sources (data silos). - High complexity of financial products and valuation models. - Resistance to process changes within business units (change management). - Ensuring compliance with regulatory requirements (e.g. IFRS 9, BCBS 239). - Time- and budget-critical execution during ongoing operations. - Deliverables:** - Milestone 1: Completed current-state analysis and process documentation. - Deliverable 1: Detailed analysis report including risk and gap assessment. - Milestone 2: Finalized target concept and Business Requirements Document. - Deliverable 2: Implementation roadmap and project plan. - Milestone 3: Successful user acceptance test (UAT) of the new process/tool. - Deliverable 3: Acceptance minutes, training materials, and project closure report.

A company is looking for an experienced expert with in-depth knowledge of License Manager, Inventory Server, and Integration Manager. The goal of the project is to optimize existing systems, integrate them, and ensure all processes run smoothly and efficiently. In this role, the expert will work closely with internal teams to analyze requirements, implement solutions, and monitor the systems. Key responsibilities: - Analyzing and optimizing existing systems (License Manager, Inventory Server, Integration Manager) - Integrating new processes and tools - Collaborating with internal teams on requirements analysis - Ensuring system efficiency and security - Documenting and training the teams

- Customizing / parametrization of the core banking system according to business requirements - Maintaining daily operations - Initial and advanced training of internal staff

- Operational control and management of material requirement planning and provisioning, as well as maintenance of material master data for an efficient material flow - Ensuring and monitoring the operational material flow and proactively initiating measures in case of deviations, in close coordination with suppliers and internal stakeholders - Optimizing inventory levels in terms of tied-up capital costs, material coverage, and demand fulfillment - Contributing to the further development of processes and organization of the Material Management department

For an internationally active special machine manufacturer, an experienced PLC programmer is sought to implement demanding automation projects. The focus is on new programming and commissioning of controllers. - Typical tasks: development, testing and documentation of PLC software for new systems with Siemens SIMATIC S7 (TIA Portal) and/or CODESYS V3. Creation and customization of HMI visualizations (e.g. with WinCC Unified, TwinCAT HMI). On-site commissioning of machines and systems at the customer (incl. I/O checks, configuration of fieldbus systems such as Profinet/EtherCAT, functional tests). Systematic error analysis and optimization of existing systems. Technical support for customer service. - Relevant technologies/tools: Siemens TIA Portal, SIMATIC S7-1500, CODESYS V3, Beckhoff TwinCAT, WinCC, various fieldbus configurators, EPLAN P8 (reading electrical diagrams). - KPIs/success metrics: adherence to development and commissioning schedules, reduction of commissioning time through high software quality, machine cycle time and availability (OEE), customer satisfaction after commissioning. - Special challenges: integration of hardware and software components from different manufacturers. Working under time pressure during on-site commissioning. Ensuring functional machine safety (safety PLC) according to standards (e.g. ISO 13849-1). - Deliverables: fully functional, fully documented PLC programs, final HMI projects, signed commissioning and acceptance reports, creation or update of operating manuals. - Best practices: structured programming according to standards (e.g. IEC 61131-3), modular and reusable software blocks, consistent code versioning (e.g. in Git).

The ProMi Squad (Process Mining) project aims to provide a transparent, end-to-end view of the entire ordering process in the portals area. Relevant data sources, from order placement to activation, are brought together for this purpose. The holistic view of the end-to-end process enables identification of process deviations and optimization potentials. Key milestones of the project include connecting the required data sources, building self-service reports, and implementing automated alerts for deviations in the process flow. The challenge is the technical and functional integration of heterogeneous systems and data streams to ensure consistent monitoring and control of the ordering process. - -- Service Description - Analysis and documentation of requirements in the omnichannel area using requirements management tools and structured collection methods - Functional and technical analysis of existing data sources and ETL processes using database tools - Capturing and evaluating the existing interfaces between source and target systems based on technical documentation - Advising on the technical integration of defined data sources into the Celonis environment, taking into account the tools used: Celonis EMS, Data Pool, and Data Push API - Creating technical queries and representations for process visualization based on the available platform features (Celonis PQL, Studio) - Using system functions for visualization and analysis of existing business processes (via the Celonis Process Explorer) - Providing functional advice on technical interfaces, data provisioning, and system requirements

A company is looking for an experienced engineering expert in sterile filling to support a demanding project in pharmaceutical production. The goal of the project is to optimize the efficiency and quality of the filling processes and ensure that all regulatory requirements are met. In this role, the expert will work closely with the internal team to develop technical solutions, analyze existing processes, and implement improvements. Main tasks: - Analyze and optimize processes in sterile filling - Ensure compliance with GMP and other regulatory requirements - Develop and implement technical solutions for process improvement - Collaborate with interdisciplinary teams - Document and report on progress and results

A company is looking for an experienced project manager with a civil engineering background for the power plant or energy industry. The goal of the project is to lead the planning, coordination and implementation of construction projects in the energy and power plant sector. The role requires close collaboration with interdisciplinary teams to ensure that projects are completed on time and within budget. It is explicitly stated that construction managers are not being sought. Main tasks: - Leading and monitoring construction projects in the power plant or energy industry - Coordinating between various departments and external partners - Ensuring compliance with safety and quality standards - Creating and tracking project plans and budgets - Identifying and solving technical challenges - Reporting to stakeholders and management

Project description As part of the implementation and optimization of the **Multi Domain Orchestration and Inventory (MDOI)** tool in the mobile transport domain (B2X), the focus is on planning, setup, commissioning, management, and optimization of several thousand fixed and mobile network devices. The application allows the selection and configuration of suitable devices and technologies for their efficient use to achieve maximum network coverage and customer satisfaction. Efficiently managing these projects and processes while increasing automation requires the use of the MDOI software solution. Description of services without personal reference - **IT Project Management**: Creating software rollout and migration plans for the application's two-month releases of MDOI, based on Blueplanet, considering all relevant dependencies using JIRA and stakeholder management - **Design Management**: Planning and creating all relevant designs, as well as reviewing them in the Multi Domain Orchestration and Inventory (MDOI) tool for the transport networks area, as an implementation description of the requirements using JIRA and Confluence - **Stakeholder Management**: Developing and executing communication measures for software changes based on the created designs, checking whether the requirements are fully covered by the designs, including preparing documentation for management using Microsoft Outlook, Microsoft Teams, and JIRA

A company is looking for an experienced technical project manager in the district heating sector. The project’s goal is to plan and construct district heating pipelines across all service phases according to HOAI and to take on complex project tasks. The project manager will play a key role in managing and coordinating projects, working closely with engineering firms, municipalities, authorities, and internal contacts. The role includes developing and optimizing planning options to maximize project efficiency and sustainability. The project manager will also continuously improve technical planning guidelines and processes, conduct technical-economic analyses, develop scenarios, and create concepts. Another focus is budgeting for network investments in the heating sector in close coordination with central controlling, as well as performing network calculations. - Planning and construction of district heating pipelines across all HOAI service phases. - Managing and coordinating projects in collaboration with engineering firms, municipalities, authorities, and internal contacts. - Developing and optimizing planning options to increase efficiency and sustainability. - Supporting the improvement of technical planning guidelines and processes. - Conducting technical-economic analyses and developing scenarios and concepts. - Preparing budget plans for network investments in the heating sector. - Performing network calculations.

A company is looking for an experienced consultant with expertise in security concepts, SAP ILM, deletion concepts and e-commerce. The goal of the project is to analyze existing processes, optimize security and deletion concepts, and ensure compliance with data protection regulations. The consultant will work closely with internal teams to develop and implement tailored solutions. Key tasks: - Analyze existing security and deletion concepts - Optimize and implement SAP ILM processes - Advise on e-commerce security requirements - Ensure compliance with data protection regulations - Support documentation and training of internal teams

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact on-site for electrical commissioning issues, reviewing complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary. Clear communication with stakeholders and independent client-side representation are key aspects of this role. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: If blame is justified → propose and implement a solution. If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

- A company is seeking an experienced interim procurement professional to support its Amsterdam office due to a departing colleague. - The role will end once a permanent successor is found, with the possibility of extension depending on the recruitment process. - The professional will act as the sole representative of a group-wide procurement organization in the Amsterdam office, working closely with a team of nine spread across Europe. - The role involves managing end-to-end procurement processes for both existing and new suppliers, focusing on Marketing and Professional Services categories. - The professional will ensure adherence to procurement standards, negotiate prices, and compare offers in collaboration with business owners. - The onboarding will primarily be remote, with occasional in-person days in Amsterdam.

Management of a strategic digitalization project in a hospital network, e.g. the implementation of a new hospital information system (HIS) or an electronic patient record (ePA) according to KHZG. - **Typical tasks:** - Overall responsibility for project planning, control, and monitoring (time, budget, quality). - Management of the interdisciplinary project team. - Requirements, risk, and stakeholder management. - Planning and management of change management and rollouts. - Ensuring compliance with regulatory requirements (KHZG, GDPR). - **Relevant technologies, tools & methods:** - HIS systems (Orbis, iMedOne), ePA solutions. - Standards: HL7, FHIR. - Methods: PRINCE2, PMI/PMBOK, agile/hybrid. - Tools: MS Project, Jira, Confluence. - **Typical KPIs & success metrics:** - KHZG compliance, user adoption rate (>85%), process efficiency, milestone adherence. - **Key challenges & risks:** - High process complexity, intensive stakeholder management, interoperability, data security. - **Deliverables:** - Project plan, status reports, requirements specification, change concept, cutover plan, project closure report.