- Construction management for the installation of electrical systems in the context of a grid connection project - Ensuring compliance with budget, time and quality targets as well as all relevant legal requirements - Reviewing technical documents such as construction plans, material lists and performance certificates - Coordinating and communicating with subcontractors, suppliers and project stakeholders - Interface management and ensuring a smooth project process

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact on-site for electrical commissioning issues, reviewing complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary. Clear communication with stakeholders and independent client-side representation are key aspects of this role. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: If blame is justified → propose and implement a solution. If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact for electrical commissioning issues on-site, navigating complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary, ensuring clear communication with stakeholders. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: - If blame is justified → propose and implement a solution. - If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

A company is looking for an experienced project manager with a civil engineering background for the power plant or energy industry. The goal of the project is to lead the planning, coordination and implementation of construction projects in the energy and power plant sector. The role requires close collaboration with interdisciplinary teams to ensure that projects are completed on time and within budget. It is explicitly stated that construction managers are not being sought. Main tasks: - Leading and monitoring construction projects in the power plant or energy industry - Coordinating between various departments and external partners - Ensuring compliance with safety and quality standards - Creating and tracking project plans and budgets - Identifying and solving technical challenges - Reporting to stakeholders and management

An EPC consultant is looking for an experienced site manager (mechanical) to oversee a biogas plant project. The goal of the project is to supervise construction and ensure mechanical work meets project requirements. In this role, you will take responsibility for construction supervision and coordinate mechanical work on site. You will work closely with other project stakeholders to ensure schedules, quality standards and safety regulations are met. - Supervision of mechanical construction work at the biogas plant - Ensuring adherence to schedules and quality standards - Coordination of subcontractors and suppliers - Conducting regular site inspections and reporting - Assisting in resolving technical challenges on site - Compliance with safety regulations and environmental standards

A company is looking for an experienced construction supervisor or manager in the fiber optic field to provide technical support and oversee the construction work of a general contractor in FTTH broadband expansion. The goal is to ensure that the construction work meets the specifications of the execution planning and that the FTTH broadband network is fully developed. The construction sites are located near Würzburg and Saarbrücken. The role includes monitoring adherence to schedules, safety regulations, and construction quality, as well as coordinating and documenting construction activities. The construction manager will independently create a site diary and complete documentation, track subcontracted work, and verify the accuracy of planning and construction documents. - Technical support and supervision of the construction work of a general contractor in FTTH broadband expansion. - Ensuring compliance with schedules, safety regulations, and construction quality. - Recording and reviewing planning and construction documents of subcontractors. - Independently creating a site diary and complete documentation. - Tracking, controlling, and documenting ordered services and deliveries. - Site supervision and safety inspections of the construction site according to the HSE concept.

A company is looking for an experienced site manager with switching authorization for 110-kV and 220-kV systems who specializes in substations. The goal of the project is to oversee and manage construction work related to high-voltage substations, ensuring compliance with safety standards and project schedules. The role includes leading on-site teams, coordinating with stakeholders, and ensuring the proper execution of electrical switching operations. Main tasks: - Oversee construction work at substations. - Ensure compliance with safety regulations and standards. - Coordinate with project teams and external stakeholders. - Perform electrical switching operations for 110-kV and 220-kV systems. - Manage project schedules and delivery dates. - Conduct quality checks and ensure proper documentation.

A company is looking for a Siemens PLC Programmer to support a hybrid setup in Siegen. The project focuses on programming and optimizing Siemens PLC systems, particularly within the steel industry. The role requires expertise in S120 and G120 servo drives. The ideal candidate should live close to Siegen to facilitate on-site work when required. Key responsibilities: - Programming and optimizing Siemens PLC systems. - Working with S120 and G120 servo drives. - Collaborating with the team to ensure smooth operations in a hybrid setup. - Troubleshooting and resolving technical issues. - Ensuring compliance with industry standards and safety regulations.

For a project in the power plant environment, a freelance specialist for the migration and adaptation of the ABB 800xA control system is needed at short notice. - Typical tasks in this role:** - Implementation of programming and commissioning with the ABB 800xA process control system. - Migration of existing control system logic to the new system version, including adaptation of controllers and I/O modules. - Creation and adjustment of process graphics, operator interfaces, and alarm management configurations. - Execution of system tests, error analysis, and performance optimizations to ensure plant availability and control capability. - Technical support for operations staff during commissioning and ramp-up phases. - Preparation and maintenance of technical documentation (functional diagrams, configuration descriptions, test reports). - Close cooperation with process engineering, electrical engineering, and the plant operator.

A company is looking for an experienced technical project manager in the district heating sector. The project’s goal is to plan and construct district heating pipelines across all service phases according to HOAI and to take on complex project tasks. The project manager will play a key role in managing and coordinating projects, working closely with engineering firms, municipalities, authorities, and internal contacts. The role includes developing and optimizing planning options to maximize project efficiency and sustainability. The project manager will also continuously improve technical planning guidelines and processes, conduct technical-economic analyses, develop scenarios, and create concepts. Another focus is budgeting for network investments in the heating sector in close coordination with central controlling, as well as performing network calculations. - Planning and construction of district heating pipelines across all HOAI service phases. - Managing and coordinating projects in collaboration with engineering firms, municipalities, authorities, and internal contacts. - Developing and optimizing planning options to increase efficiency and sustainability. - Supporting the improvement of technical planning guidelines and processes. - Conducting technical-economic analyses and developing scenarios and concepts. - Preparing budget plans for network investments in the heating sector. - Performing network calculations.

A company is looking for an experienced MES consultant specializing in MPDV’s Hydra X to help expand the system to more sites. The system is already live at one location and now needs to be scaled further. The role includes supporting the introduction of new features or system versions, implementing system customizations and optimizations based on production requirements, and overseeing the rollout. The consultant will work closely with internal teams and external service providers to quickly identify and resolve issues in the MES system. - Support the introduction of new features or system versions - Implement system customizations and optimizations based on production requirements - Assist with rolling out to additional sites - Quickly identify and resolve issues in the MES system

A company is seeking support for carrying out the engineering of energy generation and consumption plants and their connection to the transmission and/or distribution grids of network operators in Germany and abroad. The project includes both existing plants and those under development, such as power plants, consumer installations, and hybrid systems like battery installations. The goal is to plan, coordinate, and implement grid connections efficiently. Main tasks: - Managing approval processes for grid connections at the respective voltage level - Preparing technical documents for grid connection requests - Creating grid connection applications, including technical documentation for network operators - Technical engineering for grid connection concepts - Designing extra-high, high, and medium-voltage switchgear and substations - Basic and detailed engineering, including tender documents and specifications - Developing technical standards to implement quality requirements - Control and coordination tasks within project execution - Consulting and coordination for quality assurance measures - Project management in line with technical regulations and project management strategies - Advice on contract management, e.g., grid connection contracts - Coordinating processes and carrying out on-site construction support measures - Developing retrofit concepts for conventional power plants, hydropower plants, and other installations

- Ensure that access roads are built and prepared according to NKT guidelines - Monitor correct construction of: - pay-out areas - push pits - other relevant structures - Check transport on the last mile to the payout area - Oversee cable pulling at the payout area and in the push pit - Collaborate with the civil works supervisor on: - backfilling of push pits - dismantling of access roads and payout areas - ensuring proper execution of joint pits according to NKT guidelines - Supervise professional joint connections - Oversee blowing in and joining of fiber optic cables (FOC) - Coordinate with the civil works supervisor on backfilling joint pits

A civil engineer (m/f/d) is needed as client representative for a public client's project. The project covers the development and rehabilitation of roads, sidewalks, street lighting and bus stops. - Typical tasks in this role:** - Taking on the non-delegable client tasks according to the AHO series, incl. defining objectives, budget responsibility and making key decisions. - Managing and coordinating external planning offices, experts and construction companies. - Ensuring compliance with procurement law (VOB/VgV), building regulations and relevant technical standards (e.g. DIN, ZTV). - Managing costs and schedules as well as risk management across all project phases (according to HOAI). - Quality assurance on site, organizing construction meetings and conducting inspections. - Reviewing change orders and invoices. - Regular reporting to the office management and political committees; ensuring transparency and clear documentation. - Relevant technologies, tools or methods:** - CAD/BIM software: Autodesk Civil 3D, Revit, AutoCAD. - Tendering, awarding, billing (AVA): RIB iTWO, ORCA AVA. - Project management & control: MS Project, Projektron BCS, Asana. - Construction management & documentation: PlanRadar, Capmo. - Solid knowledge of VOB/B, VOB/C and HOAI. - Typical KPIs or success metrics:** - Budget compliance: deviation from approved budget < 10%. - Schedule adherence: meeting milestones (planning completion, start of construction, completion) with < 5% delay. - Quality: low defect rate at final inspection (< 5% of trades with major defects). - Citizen satisfaction: minimal number of justified complaints during construction. - Legal security: number of successfully defended change claims or legal disputes. - Key challenges, risks or specifics:** - Dealing with unexpected ground conditions and contaminated sites. - Complex and lengthy approval processes with various public stakeholders. - Strict budget constraints and political pressure on cost overruns. - Managing resident interests and public communication. - Challenges due to skilled labor shortage and supply chain bottlenecks in the construction industry. - Concrete deliverables:** - Completed and approved design and execution planning. - Successfully executed tender procedure with signed construction contracts. - Documented construction inspections in accordance with VOB. - Final project documentation and audited final invoices. - Final report for management and political committees.

For an internationally active special machine manufacturer, an experienced PLC programmer is sought to implement demanding automation projects. The focus is on new programming and commissioning of controllers. - Typical tasks: development, testing and documentation of PLC software for new systems with Siemens SIMATIC S7 (TIA Portal) and/or CODESYS V3. Creation and customization of HMI visualizations (e.g. with WinCC Unified, TwinCAT HMI). On-site commissioning of machines and systems at the customer (incl. I/O checks, configuration of fieldbus systems such as Profinet/EtherCAT, functional tests). Systematic error analysis and optimization of existing systems. Technical support for customer service. - Relevant technologies/tools: Siemens TIA Portal, SIMATIC S7-1500, CODESYS V3, Beckhoff TwinCAT, WinCC, various fieldbus configurators, EPLAN P8 (reading electrical diagrams). - KPIs/success metrics: adherence to development and commissioning schedules, reduction of commissioning time through high software quality, machine cycle time and availability (OEE), customer satisfaction after commissioning. - Special challenges: integration of hardware and software components from different manufacturers. Working under time pressure during on-site commissioning. Ensuring functional machine safety (safety PLC) according to standards (e.g. ISO 13849-1). - Deliverables: fully functional, fully documented PLC programs, final HMI projects, signed commissioning and acceptance reports, creation or update of operating manuals. - Best practices: structured programming according to standards (e.g. IEC 61131-3), modular and reusable software blocks, consistent code versioning (e.g. in Git).

Project description As part of the implementation and optimization of the **Multi Domain Orchestration and Inventory (MDOI)** tool in the mobile transport domain (B2X), the focus is on planning, setup, commissioning, management, and optimization of several thousand fixed and mobile network devices. The application allows the selection and configuration of suitable devices and technologies for their efficient use to achieve maximum network coverage and customer satisfaction. Efficiently managing these projects and processes while increasing automation requires the use of the MDOI software solution. Description of services without personal reference - **IT Project Management**: Creating software rollout and migration plans for the application's two-month releases of MDOI, based on Blueplanet, considering all relevant dependencies using JIRA and stakeholder management - **Design Management**: Planning and creating all relevant designs, as well as reviewing them in the Multi Domain Orchestration and Inventory (MDOI) tool for the transport networks area, as an implementation description of the requirements using JIRA and Confluence - **Stakeholder Management**: Developing and executing communication measures for software changes based on the created designs, checking whether the requirements are fully covered by the designs, including preparing documentation for management using Microsoft Outlook, Microsoft Teams, and JIRA

To support projects in energy infrastructure, we are looking for a freelance electrical engineer specializing in high and extra-high voltage as a primary planner (m/f/d). The projects include grid connection of generation plants (especially wind and solar parks) as well as new construction and conversion of substations. - Typical tasks in this role:** - Developing primary-technical concepts and layouts for air- and gas-insulated high and extra-high voltage switchgear (AIS/GIS) from 110 kV to 380 kV. - Designing and sizing primary equipment (circuit breakers, disconnectors, instrument transformers, transformers, etc.). - Creating single-line diagrams, one-line overview and arrangement drawings. - Performing short-circuit and load flow calculations as well as sizing grounding systems and lightning protection. - Technical clarification and coordination with clients, grid operators, authorities, and suppliers. - Preparing technical specifications and tender documents for primary equipment. - Coordinating with other trades such as secondary equipment, civil engineering, and control systems. - Supporting commissioning and handover of the installations. - Relevant technologies, tools or methods:** - Planning software: AutoCAD, Primtech, REVIT, EPLAN. - Calculation tools: PowerFactory (DIgSILENT), NEPLAN, or vendor-specific tools. - Standards & regulations: VDE-AR-N 4120 (TAR High Voltage), IEC standards, EN standards. - Project management tools: MS Project, Jira. - BIM (Building Information Modeling) in plant engineering. - Typical KPIs or success metrics:** - Planning quality: Number of plan revisions after approval < 5%. - On-time delivery: Meeting planning milestones according to the overall project schedule. - Cost efficiency: Adhering to budget targets for planned primary equipment. - Technical compliance: Successful acceptance of the installation by the grid operator without primary-technical objections. - Interface management: Smooth coordination, measured by the number of delays in other trades caused by planning errors. - Key challenges, risks or specifics:** - High complexity and safety requirements in the high and extra-high voltage range. - Need for precise compliance with grid connection guidelines (TAR) of the respective grid operators. - Long delivery times and price fluctuations for large primary-technical components. - Coordination in tight spaces, especially during conversions on existing sites. - Increasing requirements from renewable energy integration (e.g. reactive power management, FRT behavior). - Ensuring physical safety and occupational health and safety in planning. - Concrete deliverables:** - Approval-ready primary-technical planning documents (layouts, views, sections). - Final single-line diagrams and overview schematics. - Technical calculation reports (e.g. short-circuit strength, grounding). - Prepared bills of quantities and technical specifications for procurement. - Minutes of technical coordination meetings. - Revision documents and as-built documentation.

A company is looking for an experienced Electrical Technician to join a 12-month project in Berlin. The main focus of the project is supervising cable pulling. The role requires strong expertise in cables and related technologies. - Supervise and monitor cable pulling processes - Ensure compliance with technical standards and safety regulations - Work with team members to ensure project success - Report and document progress and issues

We are looking for an experienced IT project manager to oversee and execute IT projects in the hospital environment. The goal is to implement various digitalization and infrastructure projects (e.g. KIS migration, medical technology integration, ISMS implementation, or TI components) on time, within budget, and with assured quality. In this role, the project manager takes full responsibility for planning, controlling, and delivering the projects and acts as the interface between IT, business units, and management. - Overall responsibility for planning, control, and execution of IT projects in a clinical setting - Coordination of internal and external stakeholders, including the IT department, medical staff, service providers, and manufacturers - Ensuring compliance with time, budget, and quality requirements - Preparing project plans, status reports, decision papers, and presentations - Risk management, resource planning, and escalation management - Managing acceptance and testing procedures, including documentation - Supporting preparation for KHZG or NIS2 relevant measures - Acting as an interface between IT, business units, and management

A company is looking for an experienced expert with in-depth knowledge of License Manager, Inventory Server, and Integration Manager. The goal of the project is to optimize existing systems, integrate them, and ensure all processes run smoothly and efficiently. In this role, the expert will work closely with internal teams to analyze requirements, implement solutions, and monitor the systems. Key responsibilities: - Analyzing and optimizing existing systems (License Manager, Inventory Server, Integration Manager) - Integrating new processes and tools - Collaborating with internal teams on requirements analysis - Ensuring system efficiency and security - Documenting and training the teams