A company is looking for an experienced test engineer to certify the new product portfolio in the field of IoT devices. The focus is on preparing documents and tests. The project's goal is to ensure technical quality and on-time delivery for the approval and validation of IoT devices. The role includes planning, executing, and documenting functional tests, integration and system tests, as well as defining and automating test strategies, test plans, and test cases. The test engineer will work closely with product managers and internal departments to meet project requirements. Main tasks: - Performing certification tests (e.g., CE, FCC) and validation against specifications - Planning, executing, and documenting functional, integration, and system tests for IoT devices - Defining and automating test strategies, test plans, and test cases - Coordinating with product managers and internal departments - Ensuring technical quality and meeting deadlines

A company is seeking an experienced Head of Electronic Development who will take on both technical and disciplinary leadership of a hardware and software development team. The aim of the project is to ensure the quality of technical deliverables, plan and carry out strategic preliminary developments, and optimize existing processes and systems. The role includes collaborating in agile project management, cost estimation and proposal preparation, as well as team and capacity planning. The candidate will be responsible for the technical development of team members and will communicate closely with customers and suppliers. Main tasks: - Technical and disciplinary leadership of a HW+SW development team - Collaboration in agile project management, cost estimation and proposal preparation - Team and capacity planning - Technical development of team members - Responsibility for the quality of formal and technical deliverables - Calculation and pricing of products, especially PCBA - Planning and execution of strategic preliminary developments - Communication with customers and suppliers - Optimization of existing processes and systems

- Establishment of a future O2C standard process in S/4 HANA for a retail customer with a focus on O2C integration and planned handling of the merchandise management system - Existing merchandise management system for trade goods will continue to be used for all logistical processes and is not in scope. - Definition of requirements for interfaces - Process definition and harmonization: establishment of company-wide standard processes in S/4 and in O2C process integration for the affected areas/companies (B2C, B2B, B2G) - O2C integration: definition of the level of integration of third-party systems: - Best possible compliance with legal reporting and documentation requirements - S/4 as the leading system for executing intercompany transactions - Invoice flow and billing - Pricing conditions - Rebates - Contracts What should be done for the topics within the explore phase? - Preparation and execution of the Fit-to-Standard workshops (incl. setting up a prototype in the sandbox system for the workshops) - Documentation of the results of the Fit-to-Standard workshops in a BPML up to level 5 - Documentation of gaps/requirements - Process design / documentation of functional concepts (Confluence + Signavio)

A company is looking for an experienced One Identity expert to support a project in the area of identity and access management. The goal of the project is to optimize the existing One Identity solution and ensure it meets the company's current and future requirements. In this role, the expert will work closely with the internal IT team to solve technical challenges, implement best practices, and ensure the security of the identity management systems. Main Tasks: - Analyze and optimize the existing One Identity solution - Implement best practices in identity and access management - Support the integration of new systems and technologies - Train and assist the internal team - Ensure compliance with security standards and policies

For a project in the power plant environment, we are urgently looking for a freelance specialist for the migration and customization of the ABB 800xA control system. - Typical responsibilities in this role:** - Implement programming and commissioning with the ABB 800xA process control system. - Migrate existing control system logic to the new system version, including adapting controllers and I/O modules. - Create and adapt process graphics, user interfaces, and alarm management configurations. - Conduct system tests, error analyses, and performance optimizations to ensure plant availability and control capability. - Provide technical support to operations staff during commissioning and ramp-up phases. - Prepare and maintain technical documentation (functional diagrams, configuration descriptions, test protocols). - Collaborate closely with the process engineering, electrical engineering teams, and the plant operator. - Relevant technologies, tools or methods:** - Control system: ABB Ability™ System 800xA (including AC 800M controller, Information Management, Batch Control). - Engineering tools: Control Builder M, Process Graphics Migration Tool, Bulk Data Manager. - Fieldbus systems: PROFIBUS, Foundation Fieldbus, Modbus. - Virtualization: VMware, Hyper-V for test and development environments. - Databases: SQL skills for analysis of historical data (e.g. 800xA History). - Knowledge of relevant standards for process and power plant engineering (e.g. IEC 61508, IEC 61511). - Typical KPIs or success metrics:** - Migration speed: Number of migrated system components/functions per week/month. - System availability: Control system uptime after migration > 99.9%. - Commissioning error rate: Number of critical software bugs after go-live < 5. - Test coverage: Percentage of successfully executed and documented test cases > 95%. - Adherence to project schedule: Completion of migration and commissioning by the agreed deadline. - Operator acceptance: Positive feedback from operations staff on the new system environment. - Key challenges, risks or specifics:** - Migration in live operation (“brownfield”) with minimal downtime. - Ensuring compatibility between old and new system components (hardware/software). - High complexity of process logic in power plants (e.g. boiler control, turbine regulation). - Risk of cybersecurity vulnerabilities in networked control systems (e.g. CVEs for 800xA). - Managing interfaces with third-party systems (e.g. MES, ERP). - Need for close and precise collaboration between control engineering, process engineering and operations. - Concrete deliverables:** - Migrated and fully functioning control logic on the target system. - Fully tested and customer-approved process graphics and user interfaces. - Acceptance protocols for Factory Acceptance Test (FAT) and Site Acceptance Test (SAT). - Updated technical documentation of the plant. - Final migration report with lessons learned. - Trained operations staff.

A publicly traded media company is looking for an experienced Smart TV Application Developer to design and deliver innovative smart TV apps. The goal of the project is to create and optimize applications for various smart TV operating systems that provide seamless video streaming experiences. The role involves developing apps with a focus on web-based platforms, video streaming technologies, and player integration. The ideal candidate brings deep knowledge in cross-platform delivery, DASH/HLS protocols, TV-specific UI/UX patterns, and DRM technologies. - Develop smart TV applications focusing on web-based platforms and video streaming technologies - Build and deploy apps for multiple smart TV operating systems (Tizen, Vidaa, webOS) - Integrate video players (Shaka Player, AVPlay) - Cross-platform delivery and optimization (DASH/HLS protocols, TV-specific UI/UX patterns, embedded systems) - Implement DRM technologies (Playready, Widevine)

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact on-site for electrical commissioning issues, reviewing complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary. Clear communication with stakeholders and independent client-side representation are key aspects of this role. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: If blame is justified → propose and implement a solution. If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

For a company in the Friedrichshafen area, we are looking for an experienced Azure Solution Architect (m/f/d) to support a cloud transformation project. The role includes designing and implementing modern cloud-based platforms on Azure, including technical design, stakeholder communication, and operational management. Responsibilities: - Analysis of existing system landscapes and design of target cloud architectures (Azure) - Designing and implementing scalable, secure cloud solutions in an enterprise environment - Managing the migration of legacy systems to the Azure Cloud - Collaborating with DevOps, infrastructure, and security teams - Supporting architecture governance and documentation - Coaching architecture teams and acting as a technical sparring partner for management

A company is looking for a specialist construction manager for electrical engineering and a specialist construction manager for control technology (Siemens T3000) for a challenging project. The goal of the project is the technical supervision and management of the control technology interfaces of the existing plant during the integration of the new plant, as well as ensuring quality and contract compliance during the construction and commissioning phases. The role requires intensive coordination and monitoring of the interfaces with construction planning due to the size of the project. The construction manager will work closely with control technicians, planners, experts and contractors to ensure the successful implementation of the project. Main tasks: - Technical supervision of the control technology interfaces of the existing plant during the integration of the new plant - Technical management of control technicians, planners, experts and contractors - Preparation of discipline-specific and project phase–dependent documents - Participation in project meetings and negotiations - Technical management of quality assurance and quality control during the construction and commissioning phases - Consulting on control technology commissioning - Technical coordination with design engineers on quality monitoring tasks - Monitoring contract compliance and carrying out quality inspections - Participation in safety meetings and implementation of measures to rectify identified deficiencies

To support projects in the field of energy infrastructure, we are looking for a freelance electrical engineer specializing in high and extra-high voltage as a primary planner (m/f/d). The projects include grid connection of generation plants (especially wind and solar farms) as well as new construction and conversion of substations. - Typical tasks in this role:** - Development of primary technical concepts and layouts for air- and gas-insulated high and extra-high voltage switchgear (AIS/GIS) from 110 kV to 380 kV. - Design and sizing of primary equipment (circuit breakers, disconnectors, instrument transformers, transformers, etc.). - Creation of wiring diagrams, single-line diagrams, and arrangement drawings. - Performing short-circuit and load flow calculations as well as sizing of grounding systems and lightning protection. - Technical clarification and coordination with clients, grid operators, authorities, and suppliers. - Preparation of technical specifications and tender documents for primary equipment. - Coordination with other trades such as secondary systems, structural design, and control systems. - Support during commissioning and acceptance of the plants. - Relevant technologies, tools or methods:** - Planning software: AutoCAD, Primtech, REVIT, EPLAN. - Calculation tools: PowerFactory (DIgSILENT), NEPLAN, or manufacturer-specific tools. - Standards & regulations: VDE-AR-N 4120 (TAR High Voltage), IEC standards, EN standards. - Project management tools: MS Project, Jira. - BIM (Building Information Modeling) in plant engineering. - Typical KPIs or success metrics:** - Planning quality: Number of necessary plan revisions after approval < 5%. - Schedule adherence: Meeting planning milestones according to the overall project plan. - Cost efficiency: Staying within budget for the planned primary equipment. - Technical compliance: Successful acceptance of the plant by the grid operator without primary technical objections. - Interface management: Smooth coordination, measured by the number of delays in other trades caused by planning errors. - Special challenges, risks or specifics:** - High complexity and safety requirements in the high and extra-high voltage area. - Necessity of strict compliance with grid connection guidelines (TAR) of the respective grid operators. - Long delivery times and price fluctuations for large primary equipment. - Coordination in tight installation spaces, especially during retrofits. - Increasing demands due to integration of renewable energies (e.g. reactive power management, FRT behavior). - Ensuring physical safety and occupational protection in planning. - Concrete work results (“Deliverables”):** - Approval-ready primary technical planning documents (layouts, elevations, sections). - Final wiring diagrams and single-line diagrams. - Technical calculation reports (e.g. short-circuit withstand, grounding). - Prepared specifications and technical data sheets for procurement. - Minutes of technical coordination meetings. - Revision documents and as-built documentation.

A company is seeking support for carrying out the engineering of energy generation and consumption plants and their connection to the transmission and/or distribution grids of network operators in Germany and abroad. The project includes both existing plants and those under development, such as power plants, consumer installations, and hybrid systems like battery installations. The goal is to plan, coordinate, and implement grid connections efficiently. Main tasks: - Managing approval processes for grid connections at the respective voltage level - Preparing technical documents for grid connection requests - Creating grid connection applications, including technical documentation for network operators - Technical engineering for grid connection concepts - Designing extra-high, high, and medium-voltage switchgear and substations - Basic and detailed engineering, including tender documents and specifications - Developing technical standards to implement quality requirements - Control and coordination tasks within project execution - Consulting and coordination for quality assurance measures - Project management in line with technical regulations and project management strategies - Advice on contract management, e.g., grid connection contracts - Coordinating processes and carrying out on-site construction support measures - Developing retrofit concepts for conventional power plants, hydropower plants, and other installations

A company is looking for an experienced project planner who takes on creating, updating, and adjusting project structure plans as well as integrating scheduling requirements from tenders and contracts. The goal is to monitor construction progress, assess risks, and ensure the schedule is met. The project planner will work closely with project management and other stakeholders to ensure the smooth execution of the project. Main tasks: - Creating, updating, and adjusting the project structure plan and the overall project schedule. - Integrating scheduling requirements from tenders and contracts. - Tracking construction progress as well as changes and deliverables. - Performing earned value analyses (S-curve) and defining the "value of work done". - Preparing progress reports and schedule analyses. - Incorporating resource planning into the schedule. - Evaluating scheduling risks and advising risk management. - Conducting schedule risk analyses (SRA). - Coordinating interface milestones with project participants. - Supplying work results to meet schedule requirements. - Preparing and reviewing schedule-relevant content in tender documents and contract drafts. - Assessing and integrating schedules during the bidding phase. - Collecting and integrating regular schedule updates from contractors and suppliers. - Verifying contract compliance based on construction progress and deadlines. - Quality assurance of schedules according to DCMA criteria. - Performing forensic analysis of construction delays following SCL Delay & Disruption Protocols.

An organization is urgently looking for an experienced Environmental Engineer with proven expertise in environmental/ecological construction oversight and the preparation of bills of quantities for tenders (ideally according to VOB). The goal of the project is to develop a detailed bill of quantities for the Q4/2025 tender, based on standards, including performance specifications, cost forecast, qualification matrix, and contract input. The role includes the following main tasks: - Analysis of existing performance specifications - Preparation of a bill of quantities, including quantities, items, and standards - Advice on procurement strategy, risks, and supplier qualification - Close coordination with the specialist department (remote)

A company is looking for an experienced construction manager specializing in HVAC or piping systems in pharmaceutical or cleanroom environments. The project’s goal is to supervise and manage the execution of construction tasks related to HVAC or piping systems in compliance with applicable industry standards and regulations. This role focuses solely on construction management, without involvement in scheduling or project planning. Main responsibilities: - Supervise the installation and execution of HVAC or piping systems. - Ensure compliance with pharmaceutical or cleanroom standards and regulations. - Coordinate with contractors and on-site teams. - Perform quality control and ensure adherence to project specifications. - Provide technical expertise and solve problems on site.

An organization is looking for an experienced expert in structural monitoring to ensure dam safety and verify the quality of measurement data. The goal of the project is to optimize structural monitoring through professional data analysis, supplier coordination, and staff training. The expert will play a key role in reviewing and maintaining measurement data, as well as coordinating ad-hoc inspections and control tests. They will also be responsible for expanding the measurement network and optimizing existing tools. Main tasks: - Professionally review structural monitoring measurement data (data quality, completeness, outliers) - Initiate and carry out ad-hoc inspections/control tests for unusual measurements - Coordinate external suppliers to replace faulty or outdated level sensors - Check maintenance intervals for measuring devices/systems and report results to the client - Coordinate suppliers to expand the measurement network by adding electric probes - Maintain measurement and control programs regarding metrology and inspection cycles - Provide necessary SAS structural information for internal and external stakeholders - Maintain and optimize the use of existing tools (Webviewer, DamCo, WISKI database) - Plan and conduct about 10 online trainings on the tools - Provide technical advice for special inspections of individual structures

A company is looking for an experienced payment transactions expert to support the analysis and implementation of requirements according to SEPA standards (Rulebook), Target 2 and CBPR+. The goal of the project is to optimize and further develop processes in cross-border payments and bank disposition. The role includes professional handling of cross-border payment issues, including nostro reconciliation, as well as creating and optimizing SQL queries for data analysis. In addition, payment transaction statistics are carried out and CESOP reports are prepared. The expert will apply and further develop FinTS and EBICS processes and check and interpret job workflows in IT systems. The use and optimization of B+S banking system applications is also part of the tasks. - Analyze and implement requirements according to SEPA standards (Rulebook) as well as Target 2 and CBPR+. - Professional handling of cross-border payment transactions and bank disposition, including nostro reconciliation. - Creating and optimizing SQL queries for data analysis. - Conduct payment transaction statistics and prepare CESOP reports. - Apply and further develop FinTS and EBICS processes. - Check and interpret job workflows in IT systems. - Use and optimize B+S banking system applications.

A company in the automotive industry is looking for a Component Owner (m/f/d) for the wiring harness area. The goal of the project is the development and series support of wiring harnesses as well as implementing changes in this area. The role includes responsibility for parts in wiring harness development and close collaboration with interdisciplinary teams to achieve the project goals. Main tasks: - Component responsibility in the area of wiring harness development - Series support and ensuring quality - Implementation of changes in the wiring harness - Collaboration with internal and external stakeholders

A company is looking for an experienced project manager focusing on digital campaigns for social media and display. The goal of the project is the successful planning, execution and optimization of digital campaigns that are both creative and technically demanding. In this role, you will be responsible for coordinating and managing internal teams across multiple disciplines, including creative, production and translation, as well as collaborating with various markets. You will create and maintain timelines, resource plans and budgets, ensuring quality, deadlines and budgets are met. Additionally, you will organize and lead meetings, briefings and pitches. Key responsibilities: - Planning and managing digital campaigns for social media and display - Coordinating and managing internal teams across multiple disciplines and markets - Creating and maintaining timelines, resource plans and budgets - Ensuring quality, adherence to deadlines and budgets - Organizing and leading meetings, briefings and pitches - Reporting and analyzing campaign results

A company is looking for an experienced construction manager to oversee projects related to overhead line construction. The role involves managing construction sites, coordinating teams, and ensuring projects are completed on time and within budget. The ideal candidate will have a strong background in overhead line work and excellent leadership skills. - Supervise and manage construction sites for overhead line projects. - Coordinate with teams and subcontractors to ensure smooth project execution. - Monitor project progress and ensure adherence to timelines and budgets. - Ensure compliance with safety regulations and quality standards. - Communicate effectively with stakeholders and provide regular updates.

- Planning, procurement, implementation and relocation of technical equipment and special facilities domestically and abroad - Collaborating with purchasing to select the right suppliers for production equipment - Interface between the business unit, development and production - Supporting manufacturing in production (SOP + approx. 6 months) - Capacity planning (product-specific equipment) for new projects - Coordinating and conducting equipment and process approvals (FAT & SAT) - Supporting quality planners in creating a quality concept - Preparing specifications for the equipment to be procured and evaluating requirement documents - Assisting in developing a packaging concept - Creating and maintaining a sub-project plan in coordination with all relevant departments for internal use - Supporting the development department in creating new, assembly-optimized products - Close collaboration with process development, special machine construction, application technology assembly, quality engineers, injection molding application technology and industrial engineers in the business units - Supervising, supporting and monitoring suppliers (internal & external) of production equipment - Aligning manufacturing concepts with operations - Working on process development and production planning - Contributing to the creation of FMEAs - Taking on special tasks - Participating in the development of the proposal concept