A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact on-site for electrical commissioning issues, reviewing complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary. Clear communication with stakeholders and independent client-side representation are key aspects of this role. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: If blame is justified → propose and implement a solution. If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

- Construction management for the installation of electrical systems in the context of a grid connection project - Ensuring adherence to budget, time and quality goals as well as all relevant legal regulations - Reviewing technical documents such as construction plans, material lists and performance records - Coordination and communication with subcontractors, suppliers and project stakeholders - Interface management and ensuring a smooth project workflow

A company is looking for an experienced Electrical Engineer to join a 12-month project in Berlin. The main focus of the project is supervising cable pulling processes (Überwachung von Kabelzug). The role requires strong expertise in cables and related technologies. - Supervision and monitoring of cable pulling processes - Ensuring compliance with technical standards and safety regulations - Collaboration with other team members to ensure project success - Reporting and documentation of progress and issues

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact for electrical commissioning issues on-site, navigating complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary, ensuring clear communication with stakeholders. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: - If blame is justified → propose and implement a solution. - If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

A company is looking for a specialist/consultant in the field of system testing development for special machine construction. The System Test and Qualification group conducts system tests in development projects, including tests of individual components, machine modules and software releases. Responsibilities also include defining and executing acceptance tests. The goal of the project is to support detailed planning of test tasks, creation and optimization of test case specifications and execution of integration and functional tests. Activities take place exclusively on site in the lab on machine systems. - Detailed planning of test tasks - Creation and optimization of test case specifications - Execution of integration and functional tests - Running test cases (black box, use case, fail case tests) - Documenting and preparing test results in the test management tool and MS Office - Error analysis and communication with developers (directly in the lab and via MS Teams) - Coordination with project management and the test manager

A company is looking for a specialist construction manager in electrical engineering and a specialist construction manager in process control (Siemens T3000) for a challenging project. The goal of the project is the technical monitoring and management of the process control interfaces of the existing plant during the integration of the new system, and to ensure quality and contractual compliance during the construction and commissioning phases. The role requires intensive coordination and oversight of interfaces with construction planning due to the size of the project. The construction manager will work closely with process control engineers, planners, experts, and contractors to ensure successful project implementation. Main responsibilities: - Technical monitoring of the process control interfaces of the existing plant during the integration of the new system - Technical management of process control engineers, planners, experts, and contractors - Preparation of specialized and project-phase specific documents - Participation in project meetings and negotiations - Technical management of quality assurance and quality control during the construction and commissioning phases - Advising on process control commissioning - Technical coordination with design engineers on quality monitoring tasks - Monitoring contractual compliance and conducting quality inspections - Participation in safety meetings and implementation of measures to address identified deficiencies

An EPC consultant is looking for an experienced Site Manager (Mechanical) to handle a biogas plant project. The goal is to oversee the construction and ensure all mechanical work meets the project requirements. In this role, you will be responsible for monitoring construction and coordinating mechanical work on site. You will work closely with other project stakeholders to ensure schedules, quality standards, and safety regulations are met. - Supervise mechanical construction work at the biogas plant - Ensure compliance with schedules and quality standards - Coordinate subcontractors and suppliers - Conduct regular site inspections and report findings - Assist in resolving technical challenges on site - Adhere to safety regulations and environmental standards

- Ensure that access roads are built and prepared according to NKT guidelines - Monitor the proper construction of: - cable pay-off areas - thrust pits - other relevant structures - Oversee last-mile transport to the cable pay-off site - Monitor cable pulling at the pay-off site and in the thrust pit - Collaborate with the civil works supervisor on: - backfilling of thrust pits - dismantling of access roads and pay-off sites - ensuring that splice pits are constructed according to standards and NKT guidelines - Monitor the proper connection of the splices - Monitor the blowing-in and joining of the fiber optic cables (FOC) - Coordinate with the civil works supervisor on the backfilling of splice pits

A company is seeking support for carrying out the engineering of energy generation and consumption plants and their connection to the transmission and/or distribution grids of network operators in Germany and abroad. The project includes both existing plants and those under development, such as power plants, consumer installations, and hybrid systems like battery installations. The goal is to plan, coordinate, and implement grid connections efficiently. Main tasks: - Managing approval processes for grid connections at the respective voltage level - Preparing technical documents for grid connection requests - Creating grid connection applications, including technical documentation for network operators - Technical engineering for grid connection concepts - Designing extra-high, high, and medium-voltage switchgear and substations - Basic and detailed engineering, including tender documents and specifications - Developing technical standards to implement quality requirements - Control and coordination tasks within project execution - Consulting and coordination for quality assurance measures - Project management in line with technical regulations and project management strategies - Advice on contract management, e.g., grid connection contracts - Coordinating processes and carrying out on-site construction support measures - Developing retrofit concepts for conventional power plants, hydropower plants, and other installations

A company is looking for an experienced construction supervisor or manager in the fiber optics field to technically oversee and monitor a general contractor’s construction work in FTTH broadband rollout. The goal is to ensure that the construction work follows the execution planning requirements and that the FTTH broadband network is fully deployed. The sites are located near Würzburg and Saarbrücken. The role includes monitoring adherence to schedules, safety regulations, and the quality of construction work, as well as coordinating and documenting construction activities. The manager will independently prepare a construction log and overall documentation, track external services, and verify the accuracy of planning and construction documents. - Technical oversight and monitoring of a general contractor’s construction work in FTTH broadband rollout. - Ensuring compliance with schedules, safety regulations, and quality standards for construction work. - Recording and reviewing planning and construction documents of subcontractors. - Independently preparing a construction log and comprehensive documentation. - Tracking deadlines, inspecting, and documenting ordered services and deliveries. - On-site supervision and safety checks according to the HSE concept.

To support projects in energy infrastructure, we are looking for a freelance electrical engineer specializing in high and extra-high voltage as a Primary Planner (m/f/d). Projects include grid connections for generation plants (especially wind and solar farms) as well as new construction and upgrades of substations. - Typical tasks in this role:** - Developing primary-technical concepts and layouts for air- and gas-insulated high and extra-high voltage switchgear (AIS/GIS) from 110 kV to 380 kV. - Designing and sizing primary equipment (circuit breakers, disconnectors, instrument transformers, transformers, etc.). - Creating single-line diagrams, overview and arrangement drawings. - Performing short-circuit and load flow calculations as well as sizing grounding systems and lightning protection. - Technical coordination and clarification with clients, grid operators, authorities, and suppliers. - Preparing technical specifications and tender documents for primary equipment. - Coordinating with other disciplines such as secondary technology, civil engineering, and control systems. - Supporting commissioning and acceptance of the installations. - Relevant technologies, tools or methods:** - Planning software: AutoCAD, Primtech, REVIT, EPLAN. - Calculation tools: PowerFactory (DIgSILENT), NEPLAN, or manufacturer-specific tools. - Standards & regulations: VDE-AR-N 4120 (TAR High Voltage), IEC standards, EN standards. - Project management tools: MS Project, Jira. - BIM (Building Information Modeling) in plant engineering. - Typical KPIs or success metrics:** - Planning quality: Number of required plan changes after approval < 5%. - On-time delivery: Meeting planning milestones according to the overall project schedule. - Cost efficiency: Staying within budget for the planned primary equipment. - Technical compliance: Successful acceptance of the installation by the grid operator without primary-technical issues. - Interface management: Smooth coordination, measured by the number of delays in other disciplines caused by planning errors. - Key challenges, risks or specifics:** - High complexity and safety requirements in high and extra-high voltage areas. - Strict adherence to grid connection guidelines (TAR) of the respective grid operators. - Long lead times and price fluctuations for primary-technical major components. - Coordination in tight spaces, especially during upgrades in existing installations. - Increasing requirements due to integration of renewable energy (e.g. reactive power management, FRT behavior). - Ensuring physical safety and occupational health when planning. - Concrete deliverables:** - Approval-ready primary-technical planning documents (layouts, views, sections). - Final single-line diagrams and overview schematics. - Technical calculation reports (e.g. short-circuit strength, grounding). - Prepared bills of quantities and technical specifications for procurement. - Minutes from technical coordination meetings. - Revision documents and as-built documentation.

A company is looking for an experienced MES consultant specializing in MPDV’s Hydra X to support the system’s expansion to additional sites. The system is already rolled out at one location and should now be scaled further. The role includes supporting the introduction of new features or system versions, implementing system customizations and optimizations based on production requirements, and overseeing the rollout. The consultant will work closely with internal teams and external service providers to ensure quick identification and resolution of MES system issues. - Support the introduction of new system features or versions - Implement system customizations and optimizations based on production requirements - Assist with the rollout to additional sites - Quickly identify and resolve issues in the MES system

Typical tasks: - Analyze existing insurance processes and identify digitalization potentials - Gather and document business requirements together with business units - Create solution concepts for digital transformation (including process modeling and cost-benefit analyses) - Act as liaison between business and IT: translate requirements into technical concepts and support implementation - Support project management in planning and implementing new digital solutions (agile methods like Scrum/Kanban) Relevant tools & technologies: BPMN modeling tools (e.g. Visio, Signavio), requirements management (Jira, Confluence), knowledge of common insurance IT systems, MS Office KPIs & metrics: adherence to project milestones and budgets, reduction of process cycle times, increase in customer satisfaction/user acceptance, reduction of manual efforts through automation Challenges: aligning diverse stakeholders in the insurance environment (business units, IT, regulatory), integrating new digital solutions into existing legacy systems, dealing with regulatory requirements and data protection, change management and user adoption Deliverables: comprehensive requirement documents and process models, developed business concepts and user stories for IT implementation, defined implementation roadmap, training materials for updated processes Lessons learned: early involvement of all stakeholders facilitates the implementation of digitalization projects; iterative, agile approaches allow flexible adjustments; deep industry knowledge (products, regulations) is crucial to design viable digital solutions

A leading automotive supplier is looking for an experienced quality expert for inspecting welds on safety-relevant body components. The project includes ensuring the highest quality standards through non-destructive testing methods. - Typical tasks: Independent planning, execution and evaluation of non-destructive tests (NDT), especially visual testing (VT) and ultrasonic testing (UT). Creation and management of test plans and work instructions. Detailed documentation of test results in CAQ systems. Analysis of defect patterns and initiation of corrective actions in close coordination with welding and production planning. Calibration and maintenance of test equipment. - Relevant technologies/tools: Ultrasonic testing devices, endoscopes, videoscopes, CAQ software (e.g. Babtec, QSYS), knowledge of standards DIN EN ISO 9712, ISO 5817, as well as relevant VDA volumes. - KPIs/success metrics: First Pass Yield (FPY) > 98%, reduction of internal defect rate (PPM), zero-defect tolerance for safety-critical welds (escape rate = 0), on-time completion of test orders. - Special challenges: Assessing complex weld geometries under time pressure. Clear interpretation of test results and distinguishing between acceptable irregularities and critical defects. Enforcing quality standards with production. - Deliverables: Completed test protocols, detailed defect analyses and reports, updated work and test instructions, contributions to FMEAs (failure modes and effects analysis). - Best practices: Regular team coordination (shopfloor management), continuous improvement of test processes (CIP), raising awareness and training of production staff.

- Customizing / parametrization of the core banking system according to business requirements - Maintaining daily operations - Initial and advanced training of internal staff

The ProMi Squad (Process Mining) project aims to transparently map the entire order process in the portals area. Relevant data sources from order to activation are combined for this. A holistic view of the end-to-end process makes it possible to identify process deviations and optimization potential. Key milestones of the project are connecting the required data sources, building self-service reports, and implementing automated alerts for process deviations. The challenge lies in the technical and functional integration of heterogeneous systems and data flows to ensure consistent monitoring and control of the ordering process. ⸻ Service Description - Analysis and documentation of requirements in the omnichannel area using requirements management tools and structured elicitation methods - Functional and technical analysis of existing data sources and ETL processes using database tools - Capturing and evaluating existing interfaces between source and target systems based on technical documentation - Consulting on the technical integration of defined data sources into the Celonis environment, taking into account the used tools Celonis EMS, Data Pool, and Data Push API - Creating technical queries and visualizations for process mapping based on the platform features provided (Celonis PQL, Studio) - Using system functions to visualize and analyze existing business processes (via the Celonis Process Explorer) - Functional consulting on technical interfaces, data provisioning, and system prerequisites

A company is looking for an experienced technical project manager in the field of district heating. The aim of the project is to plan and construct district heating pipelines across all HOAI service phases and to take on complex project tasks. The project manager will play a key role in controlling and coordinating projects, working closely with engineering firms, municipalities, authorities and internal stakeholders. The role includes developing and optimizing planning variants to maximize project efficiency and sustainability. In addition, the project manager will continuously improve technical planning guidelines and processes, conduct technical-economic analyses, develop scenarios and create concepts. Another focus is on budget planning for network investments in the heating sector, in close coordination with central controlling, as well as performing network calculations. - Planning and construction of district heating pipelines across all HOAI service phases. - Controlling and coordinating projects in collaboration with engineering firms, municipalities, authorities and internal stakeholders. - Developing and optimizing planning variants to increase efficiency and sustainability. - Supporting the improvement of technical planning guidelines and processes. - Conducting technical-economic analyses and developing scenarios and concepts. - Creating budget plans for network investments in the heating sector. - Performing network calculations.

- IT project manager activities - Interface/bridging role between business area and technology, requiring solid subject matter knowledge.

For a project in the power plant environment, a freelance specialist is urgently needed for the migration and adaptation of the ABB 800xA control system. - Typical tasks in this role:** - Implementation of programming and commissioning with the ABB 800xA process control system. - Migration of existing control system logic to the new system version, including adaptation of controllers and I/O modules. - Creation and adjustment of process graphics, user interfaces and alarm management configurations. - Performing system tests, error analysis and performance optimizations to ensure plant availability and controllability. - Technical support for operational staff during commissioning and ramp-up phases. - Creation and maintenance of technical documentation (functional diagrams, configuration descriptions, test protocols). - Close collaboration with process engineering, electrical engineering and the plant operator. - Relevant technologies, tools or methods:** - Control system: ABB Ability™ System 800xA (including AC 800M controller, Information Management, Batch Control). - Engineering tools: Control Builder M, Process Graphics Migration Tool, Bulk Data Manager. - Fieldbuses: PROFIBUS, Foundation Fieldbus, Modbus. - Virtualization: VMware, Hyper-V for test and development environments. - Databases: Knowledge of SQL for analyzing historical data (e.g., 800xA History). - Familiarity with relevant standards for process and power plant engineering (e.g., IEC 61508, IEC 61511). - Typical KPIs or success metrics:** - Migration speed: Number of migrated system components/functions per week/month. - System availability: Control system uptime after migration > 99.9%. - Commissioning error rate: Number of critical software bugs after go-live < 5. - Test coverage: Percentage of successfully executed and documented test cases > 95%. - Adherence to project schedule: Completion of migration and commissioning by the defined deadline. - Operator acceptance: Positive feedback from operational staff on the new system environment. - Special challenges, risks or specifics:** - Migration during ongoing operation ("brownfield") with minimal downtime. - Ensuring compatibility between old and new system components (hardware/software). - High complexity of process logic in power plants (e.g., boiler control, turbine regulation). - Risk of cybersecurity vulnerabilities in networked control systems (e.g., CVEs for 800xA). - Management of interfaces to third-party systems (e.g., MES, ERP). - Need for intensive and precise collaboration between control technology, process engineering and operations. - Concrete deliverables:** - Migrated and operational control logic on the target system. - Fully tested and customer-approved process graphics and user interfaces. - Acceptance protocols for Factory Acceptance Test (FAT) and Site Acceptance Test (SAT). - Updated technical plant documentation. - Final migration report with lessons learned. - Trained operational staff.

An enterprise is looking for an experienced estimator in civil and road construction who can conduct on-site measurements in Augsburg. Billing is done with the iTwo software. The project's goal is to create accurate and efficient billing for construction projects that meet requirements and standards. The role includes both on-site work for measurements and the possibility to work remotely. - Conduct on-site measurements in Augsburg - Prepare bills using iTwo software - Ensure compliance with construction regulations and standards - Collaborate with site managers and other project stakeholders