Project details
Recommended projects
Electrical Site Manager (m/f/d)
- Site management for the installation of electrical systems in the context of a grid connection project
- Ensuring compliance with budget, time and quality targets as well as all relevant legal requirements
- Reviewing technical documents such as construction plans, material lists and performance certificates
- Coordinating and communicating with subcontractors, suppliers and project stakeholders
- Managing interfaces and ensuring smooth project execution
Electrical Commissioning Engineer (m/w/d)
A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact on-site for electrical commissioning issues, reviewing complex documentation, and resolving design and installation challenges, particularly from third-party packages.
The engineer will evaluate faults, propose solutions, and defend the client's position when necessary.
Clear communication with stakeholders and independent client-side representation are key aspects of this role.
- Act as the first point of contact on-site for electrical commissioning issues.
- Review and navigate complex documentation related to electrical systems.
- Identify and resolve design and installation issues, especially from third-party packages.
- Handle MCCs, generic point lists, and interface mismatches.
- Evaluate responsibility for faults: If blame is justified → propose and implement a solution. If blame is unjustified → defend the client's position.
- Represent and communicate problems clearly to relevant stakeholders.
Electrical Commissioning Engineer (m/w/d)
A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact for electrical commissioning issues on-site, navigating complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary, ensuring clear communication with stakeholders.
- Act as the first point of contact on-site for electrical commissioning issues.
- Review and navigate complex documentation related to electrical systems.
- Identify and resolve design and installation issues, especially from third-party packages.
- Handle MCCs, generic point lists, and interface mismatches.
- Evaluate responsibility for faults:
- If blame is justified → propose and implement a solution.
- If blame is unjustified → defend the client's position.
- Represent and communicate problems clearly to relevant stakeholders.
Construction Manager - Overhead Line Construction (m/f/d)
A company is looking for an experienced construction manager to oversee projects related to overhead line construction. The role involves managing construction sites, coordinating teams, and ensuring projects are completed on time and within budget. The ideal candidate will have a strong background in overhead line work and excellent leadership skills.
- Supervise and manage construction sites for overhead line projects.
- Coordinate with teams and subcontractors to ensure smooth project execution.
- Monitor project progress and ensure adherence to timelines and budgets.
- Ensure compliance with safety regulations and quality standards.
- Communicate effectively with stakeholders and provide regular updates.
Project Manager Approval Planning for High-Voltage Systems (m/f/d)
A company is looking for an experienced project manager for approval planning of infrastructure projects.
- Steering and coordinating approval planning
- Professional support and coordination of all involved service providers (routing, land management, environment, communication)
- Coordinating interfaces between disciplines and aligning with relevant stakeholders
- Preparing regular project reports and continuously updating project documentation
- Reviewing and approving deliverables from contracted service providers
- Ensuring compliance with legal and technical requirements
- Advising on the selection and hiring of specialist planners and experts
- Independently creating specifications and evaluating offers
Construction Manager Control Technology / Electrical Engineering (m/f/d)
A company is looking for a specialist construction manager for electrical engineering and a specialist construction manager for control technology (Siemens T3000) for a challenging project. The goal of the project is the technical supervision and management of the control technology interfaces of the existing plant during the integration of the new plant, as well as ensuring quality and contract compliance during the construction and commissioning phases.
The role requires intensive coordination and monitoring of the interfaces with construction planning due to the size of the project. The construction manager will work closely with control technicians, planners, experts and contractors to ensure the successful implementation of the project.
Main tasks:
- Technical supervision of the control technology interfaces of the existing plant during the integration of the new plant
- Technical management of control technicians, planners, experts and contractors
- Preparation of discipline-specific and project phase–dependent documents
- Participation in project meetings and negotiations
- Technical management of quality assurance and quality control during the construction and commissioning phases
- Consulting on control technology commissioning
- Technical coordination with design engineers on quality monitoring tasks
- Monitoring contract compliance and carrying out quality inspections
- Participation in safety meetings and implementation of measures to rectify identified deficiencies
Technical Project Manager District Heating (m/f/d)
A company is looking for an experienced technical project manager in the field of district heating. The project aims to plan and build district heating pipelines across all service phases of HOAI and to take on complex project tasks. The project manager will play a key role in controlling and coordinating projects, working closely with engineering offices, municipalities, authorities and internal contacts.
The role includes developing and optimizing planning options to maximize the efficiency and sustainability of the projects. In addition, the project manager will continuously improve technical planning guidelines and processes, conduct technical-economic analyses, develop scenarios and create concepts. Another focus is on budgeting for network investments in the heat sector, in close coordination with central controlling, as well as carrying out network calculations.
- Planning and construction of district heating pipelines across all HOAI service phases.
- Controlling and coordinating projects in cooperation with engineering offices, municipalities, authorities and internal contacts.
- Developing and optimizing planning options to increase efficiency and sustainability.
- Supporting the improvement of technical planning guidelines and processes.
- Conducting technical-economic analyses and developing scenarios and concepts.
- Preparing the budget for network investments in the heat sector.
- Carrying out network calculations.
Electrical Technician (m/f/d)
A company is looking for an experienced Electrical Technician to join a 12-month project in Berlin. The main focus of the project is the supervision of cable pulling (monitoring cable pulling). The role requires strong expertise in cables and related technologies.
- Supervision and monitoring of cable pulling processes
- Ensuring compliance with technical standards and safety regulations
- Collaboration with other team members to ensure project success
- Reporting and documenting progress and issues
Component Owner (m/f/d) Wiring Harness with Siemens NX Experience
A company in the automotive industry is looking for a Component Owner (m/f/d) for the wiring harness area. The goal of the project is the development and series support of wiring harnesses as well as implementing changes in this area.
The role includes responsibility for parts in wiring harness development and close collaboration with interdisciplinary teams to achieve the project goals.
Main tasks:
- Component responsibility in the area of wiring harness development
- Series support and ensuring quality
- Implementation of changes in the wiring harness
- Collaboration with internal and external stakeholders
District Heating Network Planner (m/f/d)
A company is looking for an experienced district heating network planner. The focus of the project is on the planning, optimization, and implementation of district heating networks to ensure sustainable and efficient energy supply solutions. The exact job description is still to be defined, but the planner will play a key role in developing and carrying out projects in the field of heat supply.
Requirements:
- Planning and design of district heating networks
- Analysis and optimization of existing systems
- Preparation of technical documentation and reports
- Collaboration with engineers, architects, and other professionals
- Ensuring compliance with regulations and standards
Environmental Engineer (m/f/d)
An organization is urgently looking for an experienced Environmental Engineer with proven expertise in environmental/ecological construction oversight and the preparation of bills of quantities for tenders (ideally according to VOB).
The goal of the project is to develop a detailed bill of quantities for the Q4/2025 tender, based on standards, including performance specifications, cost forecast, qualification matrix, and contract input.
The role includes the following main tasks:
- Analysis of existing performance specifications
- Preparation of a bill of quantities, including quantities, items, and standards
- Advice on procurement strategy, risks, and supplier qualification
- Close coordination with the specialist department (remote)
ABB Control System Specialist (m/f/d)
For a project in the power plant environment, we are urgently looking for a freelance specialist for the migration and customization of the ABB 800xA control system.
- Typical responsibilities in this role:**
- Implement programming and commissioning with the ABB 800xA process control system.
- Migrate existing control system logic to the new system version, including adapting controllers and I/O modules.
- Create and adapt process graphics, user interfaces, and alarm management configurations.
- Conduct system tests, error analyses, and performance optimizations to ensure plant availability and control capability.
- Provide technical support to operations staff during commissioning and ramp-up phases.
- Prepare and maintain technical documentation (functional diagrams, configuration descriptions, test protocols).
- Collaborate closely with the process engineering, electrical engineering teams, and the plant operator.
- Relevant technologies, tools or methods:**
- Control system: ABB Ability™ System 800xA (including AC 800M controller, Information Management, Batch Control).
- Engineering tools: Control Builder M, Process Graphics Migration Tool, Bulk Data Manager.
- Fieldbus systems: PROFIBUS, Foundation Fieldbus, Modbus.
- Virtualization: VMware, Hyper-V for test and development environments.
- Databases: SQL skills for analysis of historical data (e.g. 800xA History).
- Knowledge of relevant standards for process and power plant engineering (e.g. IEC 61508, IEC 61511).
- Typical KPIs or success metrics:**
- Migration speed: Number of migrated system components/functions per week/month.
- System availability: Control system uptime after migration > 99.9%.
- Commissioning error rate: Number of critical software bugs after go-live < 5.
- Test coverage: Percentage of successfully executed and documented test cases > 95%.
- Adherence to project schedule: Completion of migration and commissioning by the agreed deadline.
- Operator acceptance: Positive feedback from operations staff on the new system environment.
- Key challenges, risks or specifics:**
- Migration in live operation (“brownfield”) with minimal downtime.
- Ensuring compatibility between old and new system components (hardware/software).
- High complexity of process logic in power plants (e.g. boiler control, turbine regulation).
- Risk of cybersecurity vulnerabilities in networked control systems (e.g. CVEs for 800xA).
- Managing interfaces with third-party systems (e.g. MES, ERP).
- Need for close and precise collaboration between control engineering, process engineering and operations.
- Concrete deliverables:**
- Migrated and fully functioning control logic on the target system.
- Fully tested and customer-approved process graphics and user interfaces.
- Acceptance protocols for Factory Acceptance Test (FAT) and Site Acceptance Test (SAT).
- Updated technical documentation of the plant.
- Final migration report with lessons learned.
- Trained operations staff.
Project Planner (m/f/d)
A company is looking for an experienced project planner who takes on creating, updating, and adjusting project structure plans as well as integrating scheduling requirements from tenders and contracts. The goal is to monitor construction progress, assess risks, and ensure the schedule is met. The project planner will work closely with project management and other stakeholders to ensure the smooth execution of the project.
Main tasks:
- Creating, updating, and adjusting the project structure plan and the overall project schedule.
- Integrating scheduling requirements from tenders and contracts.
- Tracking construction progress as well as changes and deliverables.
- Performing earned value analyses (S-curve) and defining the "value of work done".
- Preparing progress reports and schedule analyses.
- Incorporating resource planning into the schedule.
- Evaluating scheduling risks and advising risk management.
- Conducting schedule risk analyses (SRA).
- Coordinating interface milestones with project participants.
- Supplying work results to meet schedule requirements.
- Preparing and reviewing schedule-relevant content in tender documents and contract drafts.
- Assessing and integrating schedules during the bidding phase.
- Collecting and integrating regular schedule updates from contractors and suppliers.
- Verifying contract compliance based on construction progress and deadlines.
- Quality assurance of schedules according to DCMA criteria.
- Performing forensic analysis of construction delays following SCL Delay & Disruption Protocols.
Head of Electronic Development (m/f/d)
A company is seeking an experienced Head of Electronic Development who will take on both technical and disciplinary leadership of a hardware and software development team. The aim of the project is to ensure the quality of technical deliverables, plan and carry out strategic preliminary developments, and optimize existing processes and systems.
The role includes collaborating in agile project management, cost estimation and proposal preparation, as well as team and capacity planning. The candidate will be responsible for the technical development of team members and will communicate closely with customers and suppliers.
Main tasks:
- Technical and disciplinary leadership of a HW+SW development team
- Collaboration in agile project management, cost estimation and proposal preparation
- Team and capacity planning
- Technical development of team members
- Responsibility for the quality of formal and technical deliverables
- Calculation and pricing of products, especially PCBA
- Planning and execution of strategic preliminary developments
- Communication with customers and suppliers
- Optimization of existing processes and systems
Project Manager with Experience in Digital Campaigning & Production (m/w/d)
A company is looking for an experienced project manager focusing on digital campaigns for social media and display. The goal of the project is the successful planning, execution and optimization of digital campaigns that are both creative and technically demanding.
In this role, you will be responsible for coordinating and managing internal teams across multiple disciplines, including creative, production and translation, as well as collaborating with various markets. You will create and maintain timelines, resource plans and budgets, ensuring quality, deadlines and budgets are met. Additionally, you will organize and lead meetings, briefings and pitches.
Key responsibilities:
- Planning and managing digital campaigns for social media and display
- Coordinating and managing internal teams across multiple disciplines and markets
- Creating and maintaining timelines, resource plans and budgets
- Ensuring quality, adherence to deadlines and budgets
- Organizing and leading meetings, briefings and pitches
- Reporting and analyzing campaign results
Technical Draftsman / Technical Product Designer / Technician (m/f/d)
On behalf of a leading medical technology company, an experienced technical draftsman or product designer is sought for creating and maintaining technical documentation and design drawings.
- **Typical tasks:**
- Create standard-compliant 2D production drawings and 3D models of parts and assemblies using CAD software.
- Detail and dimension designs considering form and position tolerances.
- Create and manage parts lists and technical documents in the PDM/PLM system (e.g. SAP ECTR).
- Perform change services on existing drawings and documentation.
- Work closely with the development and manufacturing departments to ensure manufacturability.
- **Relevant technologies, tools or methods:**
- CAD systems: Siemens NX, SolidWorks, CATIA V5, Autodesk Inventor (depending on the customer's system)
- PDM/PLM systems: SAP ECTR, Teamcenter, Windchill
- Standards: Solid knowledge of relevant ISO and DIN standards for technical drawings, especially in regulated environments.
- ERP systems: SAP S/4HANA
- **Typical KPIs or success metrics:**
- On-time delivery of drawings and documents.
- Error rate in technical documentation (number of required revision loops).
- Compliance with internal and external design and documentation standards.
- Efficiency in processing changes (turnaround time).
- **Specific challenges, risks or specifics:**
- High demands on accuracy and completeness of documentation due to strict regulatory requirements in medical technology (MDR).
- Traceability of changes (version control).
- Complexity of parts to be designed (e.g. freeform surfaces, complex assemblies).
- Close coordination with various stakeholders (development, procurement, quality assurance, manufacturing).
- **Concrete deliverables:**
- Approved 2D production drawings and 3D CAD models.
- Complete and released parts lists in the ERP system.
- Updated technical product documentation.
- Change logs.
- **Lessons learned/best practices:**
- Clear and standardized template management significantly speeds up the creation process.
- Regular coordination meetings with manufacturing can prevent costly errors early.
- Careful maintenance of master data in the PDM/PLM system is the basis for efficient collaboration.
Construction Manager HVAC or Piping in Pharma or Cleanroom (m/f/d)
A company is looking for an experienced construction manager specializing in HVAC or piping systems in pharmaceutical or cleanroom environments. The project’s goal is to supervise and manage the execution of construction tasks related to HVAC or piping systems in compliance with applicable industry standards and regulations.
This role focuses solely on construction management, without involvement in scheduling or project planning.
Main responsibilities:
- Supervise the installation and execution of HVAC or piping systems.
- Ensure compliance with pharmaceutical or cleanroom standards and regulations.
- Coordinate with contractors and on-site teams.
- Perform quality control and ensure adherence to project specifications.
- Provide technical expertise and solve problems on site.
Manufacturing Engineer (m/f/d)
- Planning, procurement, implementation and relocation of technical equipment and special facilities domestically and abroad
- Collaborating with purchasing to select the right suppliers for production equipment
- Interface between the business unit, development and production
- Supporting manufacturing in production (SOP + approx. 6 months)
- Capacity planning (product-specific equipment) for new projects
- Coordinating and conducting equipment and process approvals (FAT & SAT)
- Supporting quality planners in creating a quality concept
- Preparing specifications for the equipment to be procured and evaluating requirement documents
- Assisting in developing a packaging concept
- Creating and maintaining a sub-project plan in coordination with all relevant departments for internal use
- Supporting the development department in creating new, assembly-optimized products
- Close collaboration with process development, special machine construction, application technology assembly, quality engineers, injection molding application technology and industrial engineers in the business units
- Supervising, supporting and monitoring suppliers (internal & external) of production equipment
- Aligning manufacturing concepts with operations
- Working on process development and production planning
- Contributing to the creation of FMEAs
- Taking on special tasks
- Participating in the development of the proposal concept
SAP S/4 HANA O2C Process Consultant (m/f/d)
- Establishment of a future O2C standard process in S/4 HANA for a retail customer with a focus on O2C integration and planned handling of the merchandise management system
- Existing merchandise management system for trade goods will continue to be used for all logistical processes and is not in scope.
- Definition of requirements for interfaces
- Process definition and harmonization: establishment of company-wide standard processes in S/4 and in O2C process integration for the affected areas/companies (B2C, B2B, B2G)
- O2C integration: definition of the level of integration of third-party systems:
- Best possible compliance with legal reporting and documentation requirements
- S/4 as the leading system for executing intercompany transactions
- Invoice flow and billing
- Pricing conditions
- Rebates
- Contracts
What should be done for the topics within the explore phase?
- Preparation and execution of the Fit-to-Standard workshops (incl. setting up a prototype in the sandbox system for the workshops)
- Documentation of the results of the Fit-to-Standard workshops in a BPML up to level 5
- Documentation of gaps/requirements
- Process design / documentation of functional concepts (Confluence + Signavio)
Contract Management Clerk (m/f/d)
A company is looking for a committed Contract Management Clerk to support the team in efficiently managing contracts and ensuring compliance with legal and organizational standards. The role includes handling contract-related tasks, maintaining accurate records, and collaborating with various departments to optimize processes.
Main Tasks:
- Reviewing, drafting, and managing contracts according to company policies.
- Ensuring compliance with legal and regulatory requirements.
- Maintaining and updating contract databases and documentation.
- Collaborating with internal teams to clarify contract-related questions.
- Supporting the negotiation process and providing administrative assistance.
- Monitoring contract deadlines and renewals.
Frontend developer to HR platform with Angular experience
Reach out to us if you are interested in working with us on the project.
Sign up to get access to more exciting projects that match your skills and preferences!
Time's up! We are no longer accepting applications.
Primary planner (m/f/d) for high and extra-high voltage switchgear
Industry
Energy
Area
Product Development
Project info
- Period08.09.2025 - 09.12.2025
- Capacityfrom 90%
- Daily rate750 - 1020€
- LocationHamburg, Germany
- Language
- German(Native)
- German
- Remote40 - 60%
Description
To support projects in the field of energy infrastructure, we are looking for a freelance electrical engineer with a focus on high and extra-high voltage as a primary planner (m/f/d). The projects include grid connection of generation plants (especially wind and solar farms) as well as new construction and refurbishment of substations.
Typical areas of responsibility in this role:**
Development of primary technical concepts and layouts for air- and gas-insulated high and extra-high voltage switchgear (AIS/GIS) from 110 kV to 380 kV.
Design and sizing of primary equipment (circuit breakers, disconnectors, instrument transformers, transformers, etc.).
Creation of wiring diagrams, single-line overview and arrangement drawings.
Performing short-circuit and load flow calculations as well as design of grounding systems and lightning protection.
Technical clarification and coordination with clients, grid operators, authorities and suppliers.
Preparation of technical specifications and tender documents for primary equipment.
Coordination with other disciplines such as secondary technology, structural engineering and control systems.
Support during commissioning and acceptance of the equipment.
Relevant technologies, tools or methods:**
Planning software: AutoCAD, Primtech, REVIT, EPLAN.
Calculation tools: PowerFactory (DIgSILENT), NEPLAN, or manufacturer-specific tools.
Standards & regulations: VDE-AR-N 4120 (TAR High Voltage), IEC standards, EN standards.
Project management tools: MS Project, Jira.
BIM (Building Information Modeling) in plant engineering.
Typical KPIs or success metrics:**
Planning quality: Number of required plan changes after approval < 5%.
Schedule adherence: Meeting planning milestones according to the overall project plan.
Cost efficiency: Staying within budget for the planned primary equipment.
Technical compliance: Successful acceptance of the plant by the grid operator without primary technical non-conformities.
Interface management: Smooth coordination, measured by the number of delays in other disciplines caused by planning errors.
Specific challenges, risks or specifics:**
High complexity and safety requirements in the high and extra-high voltage area.
Necessity to strictly follow grid connection guidelines (TAR) of the respective grid operators.
Long lead times and price fluctuations for large primary components.
Coordination in tight installation spaces, especially during refurbishments.
Increasing requirements due to integration of renewable energies (e.g. reactive power management, FRT behavior).
Ensuring physical safety and occupational health and safety in planning.
Concrete deliverables ("Deliverables"):**
Approval-ready primary technical planning documents (layouts, elevations, sections).
Final wiring diagrams and single-line diagrams.
Technical calculation reports (e.g. short-circuit withstand, grounding).
Created bills of quantities and technical specifications for procurement.
Minutes of technical coordination meetings.
Revision documents and as-built documentation.
Requirements
Must-Haves:**
Completed degree in electrical engineering (Dipl.-Ing./Master/Bachelor) with a focus on power engineering or a comparable qualification (e.g. technician with many years of experience).
Several years of professional experience in primary technical planning of high and extra-high voltage switchgear (110 kV and above).
Very good knowledge of relevant standards and regulations, especially VDE application rules (TAR High Voltage).
Confident handling of CAD software (e.g. AutoCAD, Primtech) and ideally calculation software (e.g. DIgSILENT PowerFactory).
Nice-to-Haves:**
Experience in planning grid connections for renewable energies (wind/PV).
Knowledge of secondary or control technology of switchgear.
Experience in project management or sub-project management.
Knowledge of BIM methods.
Personal qualities and mindset:**
Strong enthusiasm for technology and a highly precise, detail-oriented working style.
Analytical and systematic thinking to solve complex technical challenges.
Strong communication and teamwork skills for interdisciplinary collaboration.
High sense of responsibility and reliability.
Willingness and ability to continuously learn new technologies and standards.
English
Powered by FRATCH.IO GmbH