A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact on-site for electrical commissioning issues, reviewing complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary. Clear communication with stakeholders and independent client-side representation are key aspects of this role. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: If blame is justified → propose and implement a solution. If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

- Site management for the installation of electrical systems in the context of a grid connection project - Ensuring compliance with budget, time and quality targets as well as all relevant legal requirements - Reviewing technical documents such as construction plans, material lists and performance certificates - Coordinating and communicating with subcontractors, suppliers and project stakeholders - Managing interfaces and ensuring smooth project execution

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact for electrical commissioning issues on-site, navigating complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary, ensuring clear communication with stakeholders. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: - If blame is justified → propose and implement a solution. - If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

For a project in the power plant environment, we are urgently looking for a freelance specialist for the migration and customization of the ABB 800xA control system. - Typical responsibilities in this role:** - Implement programming and commissioning with the ABB 800xA process control system. - Migrate existing control system logic to the new system version, including adapting controllers and I/O modules. - Create and adapt process graphics, user interfaces, and alarm management configurations. - Conduct system tests, error analyses, and performance optimizations to ensure plant availability and control capability. - Provide technical support to operations staff during commissioning and ramp-up phases. - Prepare and maintain technical documentation (functional diagrams, configuration descriptions, test protocols). - Collaborate closely with the process engineering, electrical engineering teams, and the plant operator. - Relevant technologies, tools or methods:** - Control system: ABB Ability™ System 800xA (including AC 800M controller, Information Management, Batch Control). - Engineering tools: Control Builder M, Process Graphics Migration Tool, Bulk Data Manager. - Fieldbus systems: PROFIBUS, Foundation Fieldbus, Modbus. - Virtualization: VMware, Hyper-V for test and development environments. - Databases: SQL skills for analysis of historical data (e.g. 800xA History). - Knowledge of relevant standards for process and power plant engineering (e.g. IEC 61508, IEC 61511). - Typical KPIs or success metrics:** - Migration speed: Number of migrated system components/functions per week/month. - System availability: Control system uptime after migration > 99.9%. - Commissioning error rate: Number of critical software bugs after go-live < 5. - Test coverage: Percentage of successfully executed and documented test cases > 95%. - Adherence to project schedule: Completion of migration and commissioning by the agreed deadline. - Operator acceptance: Positive feedback from operations staff on the new system environment. - Key challenges, risks or specifics:** - Migration in live operation (“brownfield”) with minimal downtime. - Ensuring compatibility between old and new system components (hardware/software). - High complexity of process logic in power plants (e.g. boiler control, turbine regulation). - Risk of cybersecurity vulnerabilities in networked control systems (e.g. CVEs for 800xA). - Managing interfaces with third-party systems (e.g. MES, ERP). - Need for close and precise collaboration between control engineering, process engineering and operations. - Concrete deliverables:** - Migrated and fully functioning control logic on the target system. - Fully tested and customer-approved process graphics and user interfaces. - Acceptance protocols for Factory Acceptance Test (FAT) and Site Acceptance Test (SAT). - Updated technical documentation of the plant. - Final migration report with lessons learned. - Trained operations staff.

A company is looking for an experienced construction manager to oversee projects related to overhead line construction. The role involves managing construction sites, coordinating teams, and ensuring projects are completed on time and within budget. The ideal candidate will have a strong background in overhead line work and excellent leadership skills. - Supervise and manage construction sites for overhead line projects. - Coordinate with teams and subcontractors to ensure smooth project execution. - Monitor project progress and ensure adherence to timelines and budgets. - Ensure compliance with safety regulations and quality standards. - Communicate effectively with stakeholders and provide regular updates.

A company is looking for an experienced technical project manager in the field of district heating. The project aims to plan and build district heating pipelines across all service phases of HOAI and to take on complex project tasks. The project manager will play a key role in controlling and coordinating projects, working closely with engineering offices, municipalities, authorities and internal contacts. The role includes developing and optimizing planning options to maximize the efficiency and sustainability of the projects. In addition, the project manager will continuously improve technical planning guidelines and processes, conduct technical-economic analyses, develop scenarios and create concepts. Another focus is on budgeting for network investments in the heat sector, in close coordination with central controlling, as well as carrying out network calculations. - Planning and construction of district heating pipelines across all HOAI service phases. - Controlling and coordinating projects in cooperation with engineering offices, municipalities, authorities and internal contacts. - Developing and optimizing planning options to increase efficiency and sustainability. - Supporting the improvement of technical planning guidelines and processes. - Conducting technical-economic analyses and developing scenarios and concepts. - Preparing the budget for network investments in the heat sector. - Carrying out network calculations.

- Ensure that access roads are built and prepared according to NKT specifications - Monitor the proper construction of: - pay-off sites - launching pits - other relevant structures - Control the last-mile transport to the pay-off site - Oversee cable pulling at the pay-off site and in the launching pit - Collaborate with the civil construction inspector on: - backfilling of launching pits - removal of access roads and pay-off sites - ensuring compliant execution of joint pits according to NKT specifications - Supervise the proper connection of joints - Oversee the blowing-in and splicing of fiber optic cables (LWL) - Coordinate with the civil construction inspector on the backfilling of joint pits

A company is seeking an experienced Head of Electronic Development who will take on both technical and disciplinary leadership of a hardware and software development team. The aim of the project is to ensure the quality of technical deliverables, plan and carry out strategic preliminary developments, and optimize existing processes and systems. The role includes collaborating in agile project management, cost estimation and proposal preparation, as well as team and capacity planning. The candidate will be responsible for the technical development of team members and will communicate closely with customers and suppliers. Main tasks: - Technical and disciplinary leadership of a HW+SW development team - Collaboration in agile project management, cost estimation and proposal preparation - Team and capacity planning - Technical development of team members - Responsibility for the quality of formal and technical deliverables - Calculation and pricing of products, especially PCBA - Planning and execution of strategic preliminary developments - Communication with customers and suppliers - Optimization of existing processes and systems

A company is looking for an experienced project manager for approval planning of infrastructure projects. - Steering and coordinating approval planning - Professional support and coordination of all involved service providers (routing, land management, environment, communication) - Coordinating interfaces between disciplines and aligning with relevant stakeholders - Preparing regular project reports and continuously updating project documentation - Reviewing and approving deliverables from contracted service providers - Ensuring compliance with legal and technical requirements - Advising on the selection and hiring of specialist planners and experts - Independently creating specifications and evaluating offers

A company is looking for an experienced construction manager specializing in HVAC or piping systems in pharmaceutical or cleanroom environments. The project’s goal is to supervise and manage the execution of construction tasks related to HVAC or piping systems in compliance with applicable industry standards and regulations. This role focuses solely on construction management, without involvement in scheduling or project planning. Main responsibilities: - Supervise the installation and execution of HVAC or piping systems. - Ensure compliance with pharmaceutical or cleanroom standards and regulations. - Coordinate with contractors and on-site teams. - Perform quality control and ensure adherence to project specifications. - Provide technical expertise and solve problems on site.

An organization is urgently looking for an experienced Environmental Engineer with proven expertise in environmental/ecological construction oversight and the preparation of bills of quantities for tenders (ideally according to VOB). The goal of the project is to develop a detailed bill of quantities for the Q4/2025 tender, based on standards, including performance specifications, cost forecast, qualification matrix, and contract input. The role includes the following main tasks: - Analysis of existing performance specifications - Preparation of a bill of quantities, including quantities, items, and standards - Advice on procurement strategy, risks, and supplier qualification - Close coordination with the specialist department (remote)

A company in the automotive industry is looking for a Component Owner (m/f/d) for the wiring harness area. The goal of the project is the development and series support of wiring harnesses as well as implementing changes in this area. The role includes responsibility for parts in wiring harness development and close collaboration with interdisciplinary teams to achieve the project goals. Main tasks: - Component responsibility in the area of wiring harness development - Series support and ensuring quality - Implementation of changes in the wiring harness - Collaboration with internal and external stakeholders

An organization is looking for an experienced expert in structural monitoring to ensure dam safety and verify the quality of measurement data. The goal of the project is to optimize structural monitoring through professional data analysis, supplier coordination, and staff training. The expert will play a key role in reviewing and maintaining measurement data, as well as coordinating ad-hoc inspections and control tests. They will also be responsible for expanding the measurement network and optimizing existing tools. Main tasks: - Professionally review structural monitoring measurement data (data quality, completeness, outliers) - Initiate and carry out ad-hoc inspections/control tests for unusual measurements - Coordinate external suppliers to replace faulty or outdated level sensors - Check maintenance intervals for measuring devices/systems and report results to the client - Coordinate suppliers to expand the measurement network by adding electric probes - Maintain measurement and control programs regarding metrology and inspection cycles - Provide necessary SAS structural information for internal and external stakeholders - Maintain and optimize the use of existing tools (Webviewer, DamCo, WISKI database) - Plan and conduct about 10 online trainings on the tools - Provide technical advice for special inspections of individual structures

A company is looking for an experienced project planner who takes on creating, updating, and adjusting project structure plans as well as integrating scheduling requirements from tenders and contracts. The goal is to monitor construction progress, assess risks, and ensure the schedule is met. The project planner will work closely with project management and other stakeholders to ensure the smooth execution of the project. Main tasks: - Creating, updating, and adjusting the project structure plan and the overall project schedule. - Integrating scheduling requirements from tenders and contracts. - Tracking construction progress as well as changes and deliverables. - Performing earned value analyses (S-curve) and defining the "value of work done". - Preparing progress reports and schedule analyses. - Incorporating resource planning into the schedule. - Evaluating scheduling risks and advising risk management. - Conducting schedule risk analyses (SRA). - Coordinating interface milestones with project participants. - Supplying work results to meet schedule requirements. - Preparing and reviewing schedule-relevant content in tender documents and contract drafts. - Assessing and integrating schedules during the bidding phase. - Collecting and integrating regular schedule updates from contractors and suppliers. - Verifying contract compliance based on construction progress and deadlines. - Quality assurance of schedules according to DCMA criteria. - Performing forensic analysis of construction delays following SCL Delay & Disruption Protocols.

A company is looking for an experienced Electrical Technician to join a 12-month project in Berlin. The main focus of the project is the supervision of cable pulling (monitoring cable pulling). The role requires strong expertise in cables and related technologies. - Supervision and monitoring of cable pulling processes - Ensuring compliance with technical standards and safety regulations - Collaboration with other team members to ensure project success - Reporting and documenting progress and issues

A company is looking for an experienced project manager focusing on digital campaigns for social media and display. The goal of the project is the successful planning, execution and optimization of digital campaigns that are both creative and technically demanding. In this role, you will be responsible for coordinating and managing internal teams across multiple disciplines, including creative, production and translation, as well as collaborating with various markets. You will create and maintain timelines, resource plans and budgets, ensuring quality, deadlines and budgets are met. Additionally, you will organize and lead meetings, briefings and pitches. Key responsibilities: - Planning and managing digital campaigns for social media and display - Coordinating and managing internal teams across multiple disciplines and markets - Creating and maintaining timelines, resource plans and budgets - Ensuring quality, adherence to deadlines and budgets - Organizing and leading meetings, briefings and pitches - Reporting and analyzing campaign results

- Planning, procurement, implementation and relocation of technical equipment and special facilities domestically and abroad - Collaborating with purchasing to select the right suppliers for production equipment - Interface between the business unit, development and production - Supporting manufacturing in production (SOP + approx. 6 months) - Capacity planning (product-specific equipment) for new projects - Coordinating and conducting equipment and process approvals (FAT & SAT) - Supporting quality planners in creating a quality concept - Preparing specifications for the equipment to be procured and evaluating requirement documents - Assisting in developing a packaging concept - Creating and maintaining a sub-project plan in coordination with all relevant departments for internal use - Supporting the development department in creating new, assembly-optimized products - Close collaboration with process development, special machine construction, application technology assembly, quality engineers, injection molding application technology and industrial engineers in the business units - Supervising, supporting and monitoring suppliers (internal & external) of production equipment - Aligning manufacturing concepts with operations - Working on process development and production planning - Contributing to the creation of FMEAs - Taking on special tasks - Participating in the development of the proposal concept

A company is seeking freelance support in the area of HSE management / safety specialist for a long-term project. The aim of the project is to ensure and coordinate the safety measures on a construction site in Wiesbaden in accordance with legal and contractual requirements. The role includes responsibility for implementing and monitoring occupational safety measures, conducting training and audits, as well as creating and maintaining HSE reporting. The HSE Manager will work closely with clients, partners and contractors to ensure compliance with safety standards. Key responsibilities: - Coordination of safety measures on the site in accordance with §4 Occupational Safety Act - Alignment and coordination of safety measures with contractors - Maintenance and updating of the HSE Site Manual - Conducting toolbox meetings - Participation in coordination meetings - Preparation and implementation of trade-specific risk assessments - Regular site inspections including reporting and photo documentation - Reporting and follow-up of defects as well as deriving appropriate measures - Conducting training and briefings in the area of HSE - Monitoring the use of personal protective equipment - Organizing and conducting HSE audits - Creating and maintaining HSE reporting - Checking relevant supplier documents - Analysis of accidents and near misses including preventative measures - Authority to give instructions to contractors on HSE-related matters

A company is looking for an experienced district heating network planner. The focus of the project is on the planning, optimization, and implementation of district heating networks to ensure sustainable and efficient energy supply solutions. The exact job description is still to be defined, but the planner will play a key role in developing and carrying out projects in the field of heat supply. Requirements: - Planning and design of district heating networks - Analysis and optimization of existing systems - Preparation of technical documentation and reports - Collaboration with engineers, architects, and other professionals - Ensuring compliance with regulations and standards

A company is looking for a committed Contract Management Clerk to support the team in efficiently managing contracts and ensuring compliance with legal and organizational standards. The role includes handling contract-related tasks, maintaining accurate records, and collaborating with various departments to optimize processes. Main Tasks: - Reviewing, drafting, and managing contracts according to company policies. - Ensuring compliance with legal and regulatory requirements. - Maintaining and updating contract databases and documentation. - Collaborating with internal teams to clarify contract-related questions. - Supporting the negotiation process and providing administrative assistance. - Monitoring contract deadlines and renewals.