Project description As part of the implementation and optimization of the **Multi Domain Orchestration and Inventory (MDOI)** tool in the mobile transport domain (B2X), the focus is on planning, setup, commissioning, management, and optimization of several thousand fixed and mobile network devices. The application allows the selection and configuration of suitable devices and technologies for their efficient use to achieve maximum network coverage and customer satisfaction. Efficiently managing these projects and processes while increasing automation requires the use of the MDOI software solution. Description of services without personal reference - **IT Project Management**: Creating software rollout and migration plans for the application's two-month releases of MDOI, based on Blueplanet, considering all relevant dependencies using JIRA and stakeholder management - **Design Management**: Planning and creating all relevant designs, as well as reviewing them in the Multi Domain Orchestration and Inventory (MDOI) tool for the transport networks area, as an implementation description of the requirements using JIRA and Confluence - **Stakeholder Management**: Developing and executing communication measures for software changes based on the created designs, checking whether the requirements are fully covered by the designs, including preparing documentation for management using Microsoft Outlook, Microsoft Teams, and JIRA

We are looking for an experienced IT project manager to oversee and execute IT projects in the hospital environment. The goal is to implement various digitalization and infrastructure projects (e.g. KIS migration, medical technology integration, ISMS implementation, or TI components) on time, within budget, and with assured quality. In this role, the project manager takes full responsibility for planning, controlling, and delivering the projects and acts as the interface between IT, business units, and management. - Overall responsibility for planning, control, and execution of IT projects in a clinical setting - Coordination of internal and external stakeholders, including the IT department, medical staff, service providers, and manufacturers - Ensuring compliance with time, budget, and quality requirements - Preparing project plans, status reports, decision papers, and presentations - Risk management, resource planning, and escalation management - Managing acceptance and testing procedures, including documentation - Supporting preparation for KHZG or NIS2 relevant measures - Acting as an interface between IT, business units, and management

- IT project manager activities - Interface/bridge function between business and technology, and thus also the required specialized domain knowledge.

To support the ongoing development of an innovative low-code platform, we are looking for a highly qualified Senior Frontend Engineer. The platform lets customers build complex business applications with minimal coding effort, with seamless integration into existing SAP ecosystems being mission-critical. - Typical responsibilities: Designing, architecting, and implementing sophisticated, reusable frontend components and modules using React & TypeScript. Ensuring high code quality through code reviews, unit tests, and E2E tests. Optimizing the platform’s performance for a smooth user experience. Collaborating closely in an agile Scrum team with product owners, UX/UI designers, and backend developers to deliver the product roadmap. Connecting SAP backend systems via REST and OData APIs. - Relevant technologies/tools: React, TypeScript, React Hooks, state management (e.g. Redux Toolkit, Zustand), SAP Business Technology Platform (BTP), UI5 Web Components, Storybook, Jest, React Testing Library, Cypress, Git, Jira, CI/CD. - KPIs/Success metrics: Time-to-market for new platform features, Lighthouse performance score (>90), component reusability rate, 25% reduction in reported frontend bugs per quarter, user adoption rate. - Key challenges: Finding the right balance between abstraction (low-code) and flexibility (custom client requirements). Ensuring scalability and maintainability of the frontend architecture in a fast-growing product. Guaranteeing compatibility with various SAP system versions. - Deliverables: Implemented and tested features according to user stories, extended and documented component library (in Storybook), technical architecture documentation, sprint acceptance reports. - Best practices: Applying clean code principles and design patterns (e.g. Atomic Design), building a comprehensive testing strategy, proactive team communication.

A company is looking for an experienced project manager with a civil engineering background for the power plant or energy industry. The goal of the project is to lead the planning, coordination and implementation of construction projects in the energy and power plant sector. The role requires close collaboration with interdisciplinary teams to ensure that projects are completed on time and within budget. It is explicitly stated that construction managers are not being sought. Main tasks: - Leading and monitoring construction projects in the power plant or energy industry - Coordinating between various departments and external partners - Ensuring compliance with safety and quality standards - Creating and tracking project plans and budgets - Identifying and solving technical challenges - Reporting to stakeholders and management

Building and enhancing a test automation suite for the core applications of a large insurer to improve release speed and quality. - **Typical responsibilities:** - Analyzing test processes and identifying automation potential. - Selecting, configuring, and implementing automation frameworks. - Developing and maintaining automated test scripts. - Integrating tests into CI/CD pipelines (Jenkins, GitLab). - Managing test data and reporting. - **Relevant technologies, tools & methods:** - Selenium, Cypress, Playwright, Tosca, Postman. - Java, Python, JavaScript. - TestNG, JUnit, Cucumber. - Jenkins, GitLab CI, Docker, Jira. - **Typical KPIs & success metrics:** - Automation rate (>70%), reduced test execution time, defect detection rate. - **Key challenges & risks:** - Complex legacy UIs, stable test data management, maintainability of scripts. - **Deliverables:** - Documented test automation framework, automated test suite, CI/CD integration, test reports.

On behalf of a leading medical technology company, an experienced technical draftsman or product designer is sought for creating and maintaining technical documentation and design drawings. - **Typical Responsibilities:** - Creating standard-compliant 2D manufacturing drawings and 3D models of components and assemblies using CAD software. - Detailing and dimensioning designs while considering shape and position tolerances. - Creating and managing parts lists and technical documents in the PDM/PLM system (e.g., SAP ECTR). - Carrying out change services on existing drawings and documentation. - Close collaboration with development and production departments to ensure manufacturability. - **Relevant Technologies, Tools, or Methods:** - CAD systems: Siemens NX, SolidWorks, CATIA V5, Autodesk Inventor (depending on the client system) - PDM/PLM systems: SAP ECTR, Teamcenter, Windchill - Standards: Solid knowledge of relevant ISO and DIN standards for technical drawings, especially in regulated environments. - ERP systems: SAP S/4HANA - **Typical KPIs or Success Metrics:** - On-time delivery of drawings and documents. - Error rate in technical documentation (number of correction loops needed). - Adherence to internal and external design and documentation standards. - Efficiency in implementing changes (throughput time). - **Key Challenges, Risks, or Specifics:** - High requirements for accuracy and completeness of documentation due to strict regulatory requirements in medical technology (MDR). - Complete traceability of changes (versioning). - Complexity of components to be designed (e.g., freeform surfaces, complex assemblies). - Close coordination with various stakeholders (development, purchasing, quality assurance, production). - **Concrete Deliverables:** - Approval-ready 2D manufacturing drawings and 3D CAD models. - Complete and released parts lists in the ERP system. - Updated technical product documentation. - Change logs. - **Lessons Learned/Best Practices:** - Clear and standardized template management significantly speeds up the creation process. - Regular coordination meetings with production can prevent costly errors early. - Careful maintenance of master data in the PDM/PLM system is the foundation for efficient collaboration.

Management of a strategic digitalization project in a hospital network, e.g. the implementation of a new hospital information system (HIS) or an electronic patient record (ePA) according to KHZG. - **Typical tasks:** - Overall responsibility for project planning, control, and monitoring (time, budget, quality). - Management of the interdisciplinary project team. - Requirements, risk, and stakeholder management. - Planning and management of change management and rollouts. - Ensuring compliance with regulatory requirements (KHZG, GDPR). - **Relevant technologies, tools & methods:** - HIS systems (Orbis, iMedOne), ePA solutions. - Standards: HL7, FHIR. - Methods: PRINCE2, PMI/PMBOK, agile/hybrid. - Tools: MS Project, Jira, Confluence. - **Typical KPIs & success metrics:** - KHZG compliance, user adoption rate (>85%), process efficiency, milestone adherence. - **Key challenges & risks:** - High process complexity, intensive stakeholder management, interoperability, data security. - **Deliverables:** - Project plan, status reports, requirements specification, change concept, cutover plan, project closure report.

To support projects in energy infrastructure, we are looking for a freelance electrical engineer specializing in high and extra-high voltage as a primary planner (m/f/d). The projects include grid connection of generation plants (especially wind and solar parks) as well as new construction and conversion of substations. - Typical tasks in this role:** - Developing primary-technical concepts and layouts for air- and gas-insulated high and extra-high voltage switchgear (AIS/GIS) from 110 kV to 380 kV. - Designing and sizing primary equipment (circuit breakers, disconnectors, instrument transformers, transformers, etc.). - Creating single-line diagrams, one-line overview and arrangement drawings. - Performing short-circuit and load flow calculations as well as sizing grounding systems and lightning protection. - Technical clarification and coordination with clients, grid operators, authorities, and suppliers. - Preparing technical specifications and tender documents for primary equipment. - Coordinating with other trades such as secondary equipment, civil engineering, and control systems. - Supporting commissioning and handover of the installations. - Relevant technologies, tools or methods:** - Planning software: AutoCAD, Primtech, REVIT, EPLAN. - Calculation tools: PowerFactory (DIgSILENT), NEPLAN, or vendor-specific tools. - Standards & regulations: VDE-AR-N 4120 (TAR High Voltage), IEC standards, EN standards. - Project management tools: MS Project, Jira. - BIM (Building Information Modeling) in plant engineering. - Typical KPIs or success metrics:** - Planning quality: Number of plan revisions after approval < 5%. - On-time delivery: Meeting planning milestones according to the overall project schedule. - Cost efficiency: Adhering to budget targets for planned primary equipment. - Technical compliance: Successful acceptance of the installation by the grid operator without primary-technical objections. - Interface management: Smooth coordination, measured by the number of delays in other trades caused by planning errors. - Key challenges, risks or specifics:** - High complexity and safety requirements in the high and extra-high voltage range. - Need for precise compliance with grid connection guidelines (TAR) of the respective grid operators. - Long delivery times and price fluctuations for large primary-technical components. - Coordination in tight spaces, especially during conversions on existing sites. - Increasing requirements from renewable energy integration (e.g. reactive power management, FRT behavior). - Ensuring physical safety and occupational health and safety in planning. - Concrete deliverables:** - Approval-ready primary-technical planning documents (layouts, views, sections). - Final single-line diagrams and overview schematics. - Technical calculation reports (e.g. short-circuit strength, grounding). - Prepared bills of quantities and technical specifications for procurement. - Minutes of technical coordination meetings. - Revision documents and as-built documentation.

- Operational control and management of material requirement planning and provisioning, as well as maintenance of material master data for an efficient material flow - Ensuring and monitoring the operational material flow and proactively initiating measures in case of deviations, in close coordination with suppliers and internal stakeholders - Optimizing inventory levels in terms of tied-up capital costs, material coverage, and demand fulfillment - Contributing to the further development of processes and organization of the Material Management department

- Development and enhancement of data management in SQL Server for fixed network and all-IP products, and integration of existing and new data sources from SQL Server/Oracle from CRM systems and workflow management systems - Building a database in SQL that collects and consolidates data from different source systems (CRM and workflow systems) - Creating and extending database analyses in Tableau for daily reporting - Advising business units (e.g., Technology, Order Management) on data collection and customer data management - Continuous optimization and establishment of the data management process and data quality for future projects

A company is seeking support in setting up or optimizing a structured funding controlling system for municipal energy, infrastructure, or digitization projects. The goal is to increase efficiency and transparency in the use of funding and ensure compliance with funding regulations. The role includes identifying suitable funding programs at the EU, federal, and state levels, assisting with applications, fund disbursements, and preparation of usage reports. It also involves setting up a monitoring and reporting system (e.g., in Excel) that aligns project plans with funding requirements. Consulting on processes and interfaces such as accounting and project management, as well as training internal teams as needed, are also part of the tasks. - Identification of suitable funding programs (EU, federal, state) - Support with application, fund disbursement, and usage reports - Setting up monitoring/reporting (e.g., in Excel) - Aligning project plans with funding requirements - Consulting on processes and interfaces (e.g., accounting, project management) - Training internal teams as needed

A company is looking for an experienced consultant with expertise in security concepts, SAP ILM, deletion concepts and e-commerce. The goal of the project is to analyze existing processes, optimize security and deletion concepts, and ensure compliance with data protection regulations. The consultant will work closely with internal teams to develop and implement tailored solutions. Key tasks: - Analyze existing security and deletion concepts - Optimize and implement SAP ILM processes - Advise on e-commerce security requirements - Ensure compliance with data protection regulations - Support documentation and training of internal teams

We are the Defense Tech Incubator NRW – a new initiative to support innovative startups in defense technology. Our goal: to connect the best minds and technologies with industry, public stakeholders, and investors – enabling sustainable innovations for security-critical applications. To strengthen our operations team, we are looking for an experienced professional from the defense sector – ideally with experience as an officer in the Bundeswehr or with many years at one of the leading system houses (e.g. Rheinmetall, Hensoldt, MBDA, etc.). - Your tasks: - Identification, outreach, and acquisition of potential partner companies (e.g. from industry, defense, and IT) - Building and maintaining this investor network - Contributing to our financing strategy for the incubator - Representing the incubator at industry events, trade shows, and networks - Supporting the development of strategic alliances at the state and federal level

A company is seeking support for a project aimed at transparently mapping the overall ordering process in the Portals area. The goal is to combine relevant data sources from order to activation to enable a holistic view of the end-to-end process. This should facilitate the identification of process deviations and optimization potentials. Key project milestones include connecting the required data sources, building self-service reports, and implementing automated alerts for deviations in the process flow. The challenge lies in the technical and professional integration of heterogeneous systems and data flows to ensure consistent monitoring and control of the ordering process. - Analysis and documentation of requirements in the Omnichannel area using requirements management tools and structured collection methods - Professional and technical analysis of existing data sources and ETL processes using database tools - Recording and evaluation of existing interfaces between source and target systems based on technical documentation - Consulting on technical integration of defined data sources into the Celonis environment considering the tools used (Celonis EMS, Data Pool and Data Push API) - Creation of technical queries and representations for process visualization based on provided platform functions (Celonis PQL, Studio) - Use of system-side functions for visualization and analysis of existing business processes (via Celonis Process Explorer) - Professional consulting on technical interfaces, data provision and systemic requirements

A company is looking for an experienced Technical Writer responsible for creating and managing datasheets, product brochures and catalogs. These documents are crucial for sales, legally binding and part of internal quality assurance. The product brochures present key product features and customer benefits, while the datasheets contain detailed specifications. The role involves independently managing and overseeing all correction and review processes through to final approval, as well as ensuring the defined quality and release processes according to company guidelines. In addition, the final data must be archived in the relevant systems such as the Promo Office database, PDM and internet CMS. - Creation of datasheets, product brochures and catalogs according to specifications. - Preparation of data for print production and ISO-compliant archiving in the product management system. - Management of versioned documents for print production and online publication. - Ensuring the defined quality and release processes. - Archiving final data in the relevant systems.

- A company is seeking an experienced interim procurement professional to support its Amsterdam office due to a departing colleague. - The role will end once a permanent successor is found, with the possibility of extension depending on the recruitment process. - The professional will act as the sole representative of a group-wide procurement organization in the Amsterdam office, working closely with a team of nine spread across Europe. - The role involves managing end-to-end procurement processes for both existing and new suppliers, focusing on Marketing and Professional Services categories. - The professional will ensure adherence to procurement standards, negotiate prices, and compare offers in collaboration with business owners. - The onboarding will primarily be remote, with occasional in-person days in Amsterdam.

A company is looking for freelance support in HSE management / safety specialist for a long-term project. The goal of the project is to ensure and coordinate all safety measures on a construction site in Wiesbaden in accordance with legal and contractual requirements. The role includes the responsibility for implementing and monitoring occupational safety measures, conducting trainings and audits, as well as creating and maintaining HSE reporting. The HSE Manager will work closely with clients, consortium members and contractors to ensure compliance with safety standards. Key responsibilities: - Coordinate safety measures on the construction site in accordance with Section 4 of the Occupational Health and Safety Act - Align and coordinate safety measures with contractors - Maintain and update the HSE site manual - Conduct toolbox talks - Attend coordination meetings - Prepare and carry out trade-specific risk assessments - Perform regular site inspections including reporting and photo documentation - Report and track deficiencies and derive appropriate actions - Conduct HSE training and instruction sessions - Monitor the use of personal protective equipment - Organize and carry out HSE audits - Create and maintain HSE reports - Review relevant supplier documents - Analyze work and near-miss incidents including preventive measures - Issue directives to contractors on HSE-related matters

The ProMi Squad (Process Mining) project aims to provide a transparent, end-to-end view of the entire ordering process in the portals area. Relevant data sources, from order placement to activation, are brought together for this purpose. The holistic view of the end-to-end process enables identification of process deviations and optimization potentials. Key milestones of the project include connecting the required data sources, building self-service reports, and implementing automated alerts for deviations in the process flow. The challenge is the technical and functional integration of heterogeneous systems and data streams to ensure consistent monitoring and control of the ordering process. - -- Service Description - Analysis and documentation of requirements in the omnichannel area using requirements management tools and structured collection methods - Functional and technical analysis of existing data sources and ETL processes using database tools - Capturing and evaluating the existing interfaces between source and target systems based on technical documentation - Advising on the technical integration of defined data sources into the Celonis environment, taking into account the tools used: Celonis EMS, Data Pool, and Data Push API - Creating technical queries and representations for process visualization based on the available platform features (Celonis PQL, Studio) - Using system functions for visualization and analysis of existing business processes (via the Celonis Process Explorer) - Providing functional advice on technical interfaces, data provisioning, and system requirements

- Collaboration in the software development process in the field of process automation, word processing - 3rd-level support - Participation in the analysis of software requirements in an agile development environment