The ProMi Squad (Process Mining) project aims to fully map the end-to-end order process in the portals area with full transparency. Relevant data sources from order placement to activation are consolidated. This holistic view of the process enables the identification of process deviations and optimization opportunities. Key project milestones include connecting the required data sources, building self-service reports, and implementing automated alerts for process deviations. The challenge lies in the technical and business consolidation of heterogeneous systems and data flows to ensure consistent monitoring and control of the order process. ⸻ Service description - Analyze and document requirements in the omnichannel area using requirement management tools and structured elicitation methods - Perform business and technical analysis of existing data sources and ETL processes using database tools - Capture and evaluate existing interfaces between source and target systems based on technical documentation - Advise on the technical integration of defined data sources into the Celonis environment, considering tools like Celonis EMS, Data Pool, and Data Push API - Create technical queries and visuals for process representation using platform features (Celonis PQL, Studio) - Use built-in system functions to visualize and analyze current business processes (via the Celonis Process Explorer) - Provide business advice on technical interfaces, data provisioning, and system prerequisites

Typical tasks: - Analyze existing insurance processes and identify digitalization potentials - Gather and document business requirements together with departments - Create solution concepts for digital transformation (incl. process modeling and cost-benefit analyses) - Act as liaison between business and IT: translate requirements into technical concepts and support implementation - Support project management in planning and rolling out new digital solutions (agile methods like Scrum/Kanban) Relevant tools & technologies: BPMN modeling tools (e.g. Visio, Signavio), requirements management (Jira, Confluence), knowledge of common insurance IT systems, MS Office KPIs & metrics: adherence to project milestones and budgets, reduction of process cycle times, increase in customer satisfaction/user acceptance, reduction of manual efforts through automation Challenges: aligning diverse stakeholders in the insurance environment (departments, IT, regulatory), integrating new digital solutions into existing legacy systems, handling regulatory requirements and data privacy, change management and user adoption Deliverables: comprehensive requirements documents and process models, developed business concepts and user stories for IT implementation, defined implementation roadmap, training materials for modified processes Lessons Learned: involving all stakeholders early on makes digitalization projects easier; iterative, agile approaches allow flexible adjustments; deep industry knowledge (products, regulation) is crucial to design sustainable digital solutions

- IT Project Manager activities - Interface / bridging function between business department and technology, hence also the required domain expertise.

A company is looking for an experienced Technical Writer responsible for creating and managing datasheets, product brochures and catalogs. These documents are crucial for sales, legally binding and part of internal quality assurance. The product brochures present key product features and customer benefits, while the datasheets contain detailed specifications. The role involves independently managing and overseeing all correction and review processes through to final approval, as well as ensuring the defined quality and release processes according to company guidelines. In addition, the final data must be archived in the relevant systems such as the Promo Office database, PDM and internet CMS. - Creation of datasheets, product brochures and catalogs according to specifications. - Preparation of data for print production and ISO-compliant archiving in the product management system. - Management of versioned documents for print production and online publication. - Ensuring the defined quality and release processes. - Archiving final data in the relevant systems.

We are looking for an experienced consultant for a process and project initiative in Asset P&L (Profit and Loss) at a leading international financial services provider. - Typical responsibilities in this role:** - Analyze and document the existing end-to-end P&L processes for various asset classes (e.g., equities, fixed income, derivatives). - Identify weaknesses, risks, and inefficiencies in data collection, processing, and reporting. - Design and develop optimized target processes for P&L calculation and attribution. - Create functional specifications and business requirements for adapting or introducing IT systems (e.g., P&L engines, data warehouses). - Manage the implementation of the new processes and tools, including milestone planning, stakeholder management, and test coordination. - Develop controls to ensure data quality and consistency. - Prepare training materials and conduct workshops for business areas (trading, controlling, risk). - Relevant technologies, tools, or methods:** - Advanced analytics: MS Excel (Pivot, Power Query, VBA), SQL. - Business Intelligence: Tableau, Power BI, Qlik. - Project management: Jira, Confluence, MS Project. - ERP/Finance systems: SAP FI/CO, Oracle Financials, or industry-specific asset management platforms. - Methods: Business Process Model and Notation (BPMN 2.0), agile project management (Scrum/Kanban). - Typical KPIs or success metrics:** - Reduction in P&L cycle time: target >25% efficiency gain. - Decrease in manual correction entries: target >50% reduction through process automation. - Data quality index: increase in first-time-right rate on data intake to >99%. - Efficiency ratio (cost-to-income): demonstrate a positive impact on lowering the ratio. - User adoption rate: acceptance of new processes/tools in the business area >80% after 3 months. - Key challenges, risks, or specifics:** - Heterogeneous system landscapes and inconsistent data sources (data silos). - High complexity of financial products and valuation models. - Resistance to process changes in business areas (change management). - Ensuring compliance with regulatory requirements (e.g., IFRS 9, BCBS 239). - Time- and budget-critical implementation while ongoing operations. - Concrete deliverables:** - Milestone 1: completed as-is analysis and process documentation. - Deliverable 1: detailed analysis report including risk assessment. - Milestone 2: finalized target concept and business requirements document. - Deliverable 2: implementation roadmap and project plan. - Milestone 3: successful user acceptance test (UAT) of the new process/tool. - Deliverable 3: acceptance protocols, training materials, and project closure report.

A company is seeking support for a project aimed at transparently mapping the overall ordering process in the Portals area. The goal is to combine relevant data sources from order to activation to enable a holistic view of the end-to-end process. This should facilitate the identification of process deviations and optimization potentials. Key project milestones include connecting the required data sources, building self-service reports, and implementing automated alerts for deviations in the process flow. The challenge lies in the technical and professional integration of heterogeneous systems and data flows to ensure consistent monitoring and control of the ordering process. - Analysis and documentation of requirements in the Omnichannel area using requirements management tools and structured collection methods - Professional and technical analysis of existing data sources and ETL processes using database tools - Recording and evaluation of existing interfaces between source and target systems based on technical documentation - Consulting on technical integration of defined data sources into the Celonis environment considering the tools used (Celonis EMS, Data Pool and Data Push API) - Creation of technical queries and representations for process visualization based on provided platform functions (Celonis PQL, Studio) - Use of system-side functions for visualization and analysis of existing business processes (via Celonis Process Explorer) - Professional consulting on technical interfaces, data provision and systemic requirements

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact on-site for electrical commissioning issues, reviewing complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary. Clear communication with stakeholders and independent client-side representation are key aspects of this role. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: If blame is justified → propose and implement a solution. If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

A company is looking for an experienced engineering expert in sterile filling to support a demanding project in pharmaceutical production. The goal of the project is to optimize the efficiency and quality of the filling processes and ensure that all regulatory requirements are met. In this role, the expert will work closely with the internal team to develop technical solutions, analyze existing processes, and implement improvements. Main tasks: - Analyze and optimize processes in sterile filling - Ensure compliance with GMP and other regulatory requirements - Develop and implement technical solutions for process improvement - Collaborate with interdisciplinary teams - Document and report on progress and results

We are looking for an experienced IT project manager to lead and execute IT projects in a hospital setting. The goal is to deliver various digitalization and infrastructure projects (e.g. HIS migration, medical technology integration, ISMS implementation or TI components) on time, within budget and with assured quality. In this role, the project manager takes full responsibility for planning, managing and executing the projects and acts as the link between IT, departments and management. - Overall responsibility for planning, managing and executing IT projects in a clinical environment - Coordination of internal and external stakeholders, including IT department, medical staff, service providers and manufacturers - Ensuring adherence to time, budget and quality requirements - Preparing project plans, status reports, decision documents and presentations - Risk management, resource planning and escalation handling - Managing acceptance and testing procedures, including documentation - Supporting preparation for KHZG or NIS2 related measures - Acting as interface between IT, departments and management

Managing a strategic digitization project in a hospital network, e.g. implementing a new HIS or an ePA in line with KHZG. - **Typical responsibilities:** - Overall responsibility for project planning, management and control (time, budget, quality). - Managing the interdisciplinary project team. - Requirements, risk and stakeholder management. - Planning and managing change management and rollouts. - Ensuring compliance with regulatory requirements (KHZG, GDPR). - **Relevant technologies, tools & methods:** - HIS systems (Orbis, iMedOne), ePA solutions. - Standards: HL7, FHIR. - Methods: PRINCE2, PMI/PMBOK, agile/hybrid. - Tools: MS Project, Jira, Confluence. - **Typical KPIs & success metrics:** - KHZG compliance, user adoption rate (>85%), process efficiency, milestone adherence. - **Key challenges & risks:** - High process complexity, intensive stakeholder management, interoperability, data security. - **Deliverables:** - Project plan, status reports, requirements spec (Lastenheft), change concept, cutover plan, project closure report.

A company is looking for an experienced construction supervisor or manager in the fiber optics field to professionally guide and monitor the construction services of a general contractor in FTTH broadband expansion. The goal is to ensure that the construction services meet the execution planning requirements and that the FTTH broadband network is fully deployed. The construction sites are located near Würzburg and Saarbrücken. The role includes monitoring adherence to schedules, safety requirements and construction quality, as well as coordinating and documenting construction activities. The manager will independently create a site diary and complete documentation, track subcontracted services and verify the accuracy of planning and construction documents. - Professional guidance and monitoring of a general contractor’s construction services in FTTH broadband expansion. - Ensuring compliance with schedules, safety requirements and construction quality. - Recording and checking the planning and construction documents of subcontractors. - Independently creating a site diary and comprehensive documentation. - Tracking, controlling and documenting ordered services and deliveries. - Site supervision and safety control according to the HSE concept.

A company is looking for an experienced technical project manager in the field of district heating. The project’s goal is the planning and construction of district heating pipelines through all service phases of the HOAI as well as taking on complex project tasks. The project manager will play a key role in controlling and coordinating projects, working closely with engineering firms, municipalities, authorities and internal contacts. The role includes developing and optimizing planning options to maximize project efficiency and sustainability. In addition, the project manager will continuously improve technical planning guidelines and processes, carry out technical-economic analyses, develop scenarios and create concepts. Another focus is on budget planning for network investments in the heating sector, in close coordination with central controlling, as well as carrying out network calculations. - Planning and construction of district heating pipelines through all service phases of the HOAI. - Controlling and coordinating projects in cooperation with engineering firms, municipalities, authorities and internal contacts. - Developing and optimizing planning options to increase efficiency and sustainability. - Supporting the improvement of technical planning guidelines and processes. - Conducting technical-economic analyses and developing scenarios and concepts. - Preparing budget plans for network investments in the heating sector. - Performing network calculations.

Project description As part of the implementation and optimization of the **Multi Domain Orchestration and Inventory (MDOI)** tool in the mobile transport domain (B2X), the focus is on planning, setup, commissioning, management, and optimization of several thousand fixed and mobile network devices. The application allows the selection and configuration of suitable devices and technologies for their efficient use to achieve maximum network coverage and customer satisfaction. Efficiently managing these projects and processes while increasing automation requires the use of the MDOI software solution. Description of services without personal reference - **IT Project Management**: Creating software rollout and migration plans for the application's two-month releases of MDOI, based on Blueplanet, considering all relevant dependencies using JIRA and stakeholder management - **Design Management**: Planning and creating all relevant designs, as well as reviewing them in the Multi Domain Orchestration and Inventory (MDOI) tool for the transport networks area, as an implementation description of the requirements using JIRA and Confluence - **Stakeholder Management**: Developing and executing communication measures for software changes based on the created designs, checking whether the requirements are fully covered by the designs, including preparing documentation for management using Microsoft Outlook, Microsoft Teams, and JIRA

On behalf of a leading medical technology company, we are looking for an experienced technical draftsman or product designer to create and maintain technical documentation and engineering drawings. - **Typical responsibilities:** - Create standards-compliant 2D manufacturing drawings and 3D models of parts and assemblies using CAD software. - Detail and dimension designs, taking form and position tolerances into account. - Create and manage bills of materials and technical documents in the PDM/PLM system (e.g., SAP ECTR). - Carry out revision services on existing drawings and documentation. - Work closely with the development and manufacturing departments to ensure producibility. - **Relevant technologies, tools, or methods:** - CAD systems: Siemens NX, SolidWorks, CATIA V5, Autodesk Inventor (depending on client system) - PDM/PLM systems: SAP ECTR, Teamcenter, Windchill - Standards: Solid knowledge of relevant ISO and DIN standards for technical drawings, especially in regulated environments. - ERP systems: SAP S/4HANA - **Typical KPIs or success metrics:** - On-time delivery of drawings and documents. - Error rate in technical documentation (number of required revision loops). - Compliance with internal and external design and documentation standards. - Efficiency in implementing changes (turnaround time). - **Key challenges, risks, or specifics:** - High demands on the accuracy and completeness of documentation due to strict regulatory requirements in medical technology (MDR). - Seamless traceability of changes (versioning). - Complexity of parts to be designed (e.g., freeform surfaces, complex assemblies). - Close coordination with various stakeholders (development, procurement, quality assurance, manufacturing). - **Concrete deliverables:** - Approval-ready 2D manufacturing drawings and 3D CAD models. - Complete and released bills of materials in the ERP system. - Updated technical product documentation. - Change logs. - **Lessons learned / best practices:** - Clear, standardized template management significantly speeds up the creation process. - Regular alignment meetings with manufacturing can prevent costly errors early on. - Careful maintenance of master data in the PDM/PLM system is key to efficient collaboration.

On behalf of a renowned client in the life sciences sector, freelance support is sought in Clinical Data Management. The main task is to be responsible for coordinating all data management activities in clinical studies. - Typical responsibilities in this role:** - Creation and review of the Data Management Plan (DMP) and the Data Validation Plan (DVP). - Design and implementation of electronic case report forms (eCRFs) in EDC systems (Electronic Data Capture). - Coordination of data collection, validation, and cleaning throughout the study cycle. - Development and execution of query processes to resolve data inconsistencies with study sites. - Medical coding of adverse events (AEs) and medications (e.g., using MedDRA, WHODrug). - Conducting SAE reconciliation (serious adverse event reconciliation). - Preparation and execution of database lock after data collection is complete. - Preparation of status reports and communication with the study team (project management, monitoring, biostatistics). - Relevant technologies, tools or methods:** - EDC systems: Medidata Rave, Oracle Clinical, Viedoc, Zelta, OpenClinica. - Programming languages/analysis tools: SAS, R, Python, SQL. - Standards: CDISC (SDTM, ADaM), GCP (Good Clinical Practice), 21 CFR Part 11. - Collaboration tools: MS Teams, Jira, Confluence. - Data visualization: Tableau, Power BI. - Typical KPIs or success metrics:** - Data quality: Query rate (number of queries per 1000 data points) < X; data entry error rate < 1%. - Time management: time from last patient last visit (LPLV) to database lock (target: 4–6 weeks). - Efficiency: average time to query resolution (target: < 10 working days for critical queries). - Compliance: 100% adherence to milestones and processes defined in the DMP. - Protocol adherence: rate of protocol deviations related to data management < 5%. - Specific challenges, risks or considerations:** - Managing increasing data volumes and sources (e.g., wearables, ePROs). - Ensuring data integrity and security (cybersecurity, data protection/GDPR). - Complexity from mid-study changes (protocol amendments) and their impact on the database. - Ensuring consistent data quality across multiple, globally distributed study sites. - Lack of qualified specialists and high training demands for study-specific systems. - Deliverables:** - Finalized and approved Data Management Plan (DMP). - Live and validated study database (EDC system). - Regular data cleaning reports and status updates. - Clean, quality-assured data set ready for statistical analysis. - Final locked study database with complete audit trail. - Archived project documentation after study completion.

A leading automotive supplier is looking for an experienced quality expert to inspect weld seams on safety-relevant body components. The project involves ensuring the highest quality standards through non-destructive testing methods. - Typical tasks: Independently plan, perform and evaluate non-destructive tests (NDT), especially visual testing (VT) and ultrasonic testing (UT). Create and manage test plans and work instructions. Detailed documentation of test results in CAQ systems. Analyze defect patterns and initiate corrective actions in close coordination with welding and production planning. Calibration and maintenance of test equipment. - Relevant technologies/tools: Ultrasonic testing devices, endoscopes, videoscopes, CAQ software (e.g. Babtec, QSYS), knowledge of standards DIN EN ISO 9712, ISO 5817, and relevant VDA volumes. - KPIs/success metrics: First Pass Yield (FPY) > 98%, reduction of internal defect rate (PPM), zero-error tolerance for safety-critical seams (escape rate = 0), on-time completion of test orders. - Key challenges: Assess complex seam geometries under time pressure. Clear interpretation of test results and distinguishing acceptable irregularities from critical defects. Enforcing quality standards with production. - Deliverables: Completed test reports, detailed failure analyses and reports, updated work and test instructions, contributions to FMEAs (failure mode and effects analysis). - Best practices: Regular team alignment (shopfloor management), continuous improvement of testing processes (CIP), raising awareness and training of production staff.

A company is seeking support for carrying out the engineering of energy generation and consumption plants and their connection to the transmission and/or distribution grids of network operators in Germany and abroad. The project includes both existing plants and those under development, such as power plants, consumer installations, and hybrid systems like battery installations. The goal is to plan, coordinate, and implement grid connections efficiently. Main tasks: - Managing approval processes for grid connections at the respective voltage level - Preparing technical documents for grid connection requests - Creating grid connection applications, including technical documentation for network operators - Technical engineering for grid connection concepts - Designing extra-high, high, and medium-voltage switchgear and substations - Basic and detailed engineering, including tender documents and specifications - Developing technical standards to implement quality requirements - Control and coordination tasks within project execution - Consulting and coordination for quality assurance measures - Project management in line with technical regulations and project management strategies - Advice on contract management, e.g., grid connection contracts - Coordinating processes and carrying out on-site construction support measures - Developing retrofit concepts for conventional power plants, hydropower plants, and other installations

We are looking for a freelance electrical engineer specializing in high and extra-high voltage as a primary planner (m/f/d) to support energy infrastructure projects. The projects include grid connection of generation plants (especially wind and solar farms) as well as new construction and modification of substations. - Typical responsibilities in this role:** - Developing primary engineering concepts and layouts for air- and gas-insulated high and extra-high voltage switchgear (AIS/GIS) from 110 kV to 380 kV. - Designing and sizing primary equipment (circuit breakers, disconnectors, instrument transformers, transformers, etc.). - Creating single-line diagrams, electrical schematics, and arrangement drawings. - Performing short-circuit and load flow calculations, and sizing grounding systems and lightning protection. - Conducting technical clarifications and coordination with clients, grid operators, authorities, and suppliers. - Preparing technical specifications and tender documents for primary equipment. - Coordinating with other disciplines such as secondary systems, civil engineering, and control systems. - Supporting commissioning and acceptance of the equipment. - Relevant technologies, tools, or methods:** - Planning software: AutoCAD, Primtech, REVIT, EPLAN. - Calculation tools: PowerFactory (DIgSILENT), NEPLAN, or vendor-specific tools. - Standards & regulations: VDE-AR-N 4120 (High Voltage Technical Connection Conditions), IEC standards, EN standards. - Project management tools: MS Project, Jira. - BIM (Building Information Modeling) in plant engineering. - Typical KPIs or success metrics:** - Planning quality: Number of required plan changes after approval < 5%. - Schedule adherence: Meeting planning milestones according to the overall project schedule. - Cost efficiency: Staying within the budget for the planned primary equipment. - Technical compliance: Successful acceptance of the equipment by the grid operator without primary equipment issues. - Interface management: Smooth coordination, measured by the number of delays in other disciplines caused by planning errors. - Key challenges, risks, or specifics:** - High complexity and safety requirements in the high and extra-high voltage range. - Need for exact compliance with the grid connection rules (TAR) of the respective grid operators. - Long delivery times and price fluctuations for large primary equipment. - Coordination in tight spaces, especially during refurbishment of existing facilities. - Increasing demands from integrating renewable energies (e.g., reactive power management, FRT behavior). - Ensuring physical safety and occupational health in the planning process. - Specific deliverables:** - Approval-ready primary technical planning documents (layouts, elevations, sections). - Final single-line diagrams and overview circuit diagrams. - Technical calculation reports (e.g., short-circuit withstand, grounding). - Prepared bill of quantities and technical specifications for procurement. - Minutes of technical coordination meetings. - Revision documents and as-built documentation.

- Operational control and management of material requirement planning and provisioning, as well as maintenance of material master data for an efficient material flow - Ensuring and monitoring the operational material flow and proactively initiating measures in case of deviations, in close coordination with suppliers and internal stakeholders - Optimizing inventory levels in terms of tied-up capital costs, material coverage, and demand fulfillment - Contributing to the further development of processes and organization of the Material Management department

- Development and enhancement of data management in SQL Server for fixed network and all-IP products, and integration of existing and new data sources from SQL Server/Oracle from CRM systems and workflow management systems - Building a database in SQL that collects and consolidates data from different source systems (CRM and workflow systems) - Creating and extending database analyses in Tableau for daily reporting - Advising business units (e.g., Technology, Order Management) on data collection and customer data management - Continuous optimization and establishment of the data management process and data quality for future projects