- Establishment of a future O2C standard process in S/4 HANA for a retail customer with a focus on O2C integration and planned handling of the merchandise management system - The existing merchandise management system for trade goods will still be used for all logistics processes and is out of scope. - Requirements definition for interfaces - Process definition and harmonization: Establish company-wide standard processes in S/4 and in O2C process integration for the areas/entities involved (B2C, B2B, B2G) - O2C integration: Definition of the level of integration of third-party systems: - Best possible compliance with legal reporting and documentation obligations - S/4 as the leading system for executing intercompany transactions - Billing flow and invoicing - Price conditions - Rebates - Contracts What should be done for these topics during the Explore phase? - Preparation and facilitation of Fit To Standard workshops (including building a prototype in the sandbox system for the workshops) - Documentation of the results of the Fit To Standard workshops in a BPML up to level 5 - Documentation of gaps/requirements - Process design and documentation of functional concepts (Confluence + Signavio)

Typical tasks: - Analyze existing insurance processes and identify digitalization potentials - Gather and document business requirements together with business units - Create solution concepts for digital transformation (including process modeling and cost-benefit analyses) - Act as liaison between business and IT: translate requirements into technical concepts and support implementation - Support project management in planning and implementing new digital solutions (agile methods like Scrum/Kanban) Relevant tools & technologies: BPMN modeling tools (e.g. Visio, Signavio), requirements management (Jira, Confluence), knowledge of common insurance IT systems, MS Office KPIs & metrics: adherence to project milestones and budgets, reduction of process cycle times, increase in customer satisfaction/user acceptance, reduction of manual efforts through automation Challenges: aligning diverse stakeholders in the insurance environment (business units, IT, regulatory), integrating new digital solutions into existing legacy systems, dealing with regulatory requirements and data protection, change management and user adoption Deliverables: comprehensive requirement documents and process models, developed business concepts and user stories for IT implementation, defined implementation roadmap, training materials for updated processes Lessons learned: early involvement of all stakeholders facilitates the implementation of digitalization projects; iterative, agile approaches allow flexible adjustments; deep industry knowledge (products, regulations) is crucial to design viable digital solutions

The ProMi Squad (Process Mining) project aims to transparently map the entire order process in the portals area. Relevant data sources from order to activation are combined for this. A holistic view of the end-to-end process makes it possible to identify process deviations and optimization potential. Key milestones of the project are connecting the required data sources, building self-service reports, and implementing automated alerts for process deviations. The challenge lies in the technical and functional integration of heterogeneous systems and data flows to ensure consistent monitoring and control of the ordering process. ⸻ Service Description - Analysis and documentation of requirements in the omnichannel area using requirements management tools and structured elicitation methods - Functional and technical analysis of existing data sources and ETL processes using database tools - Capturing and evaluating existing interfaces between source and target systems based on technical documentation - Consulting on the technical integration of defined data sources into the Celonis environment, taking into account the used tools Celonis EMS, Data Pool, and Data Push API - Creating technical queries and visualizations for process mapping based on the platform features provided (Celonis PQL, Studio) - Using system functions to visualize and analyze existing business processes (via the Celonis Process Explorer) - Functional consulting on technical interfaces, data provisioning, and system prerequisites

- Operational control and management of material requirements planning and provisioning, as well as maintenance of material master data for an effective material flow - Ensuring and monitoring the operational material flow and proactively initiating measures in case of deviations, in close coordination with suppliers and internal stakeholders - Optimizing inventory levels with regard to capital tied up, material coverage, and ensuring supply - Contributing to the further development of processes and organization of the Material Management department

A company is seeking support for a project aimed at transparently mapping the overall ordering process in the Portals area. The goal is to combine relevant data sources from order to activation to enable a holistic view of the end-to-end process. This should facilitate the identification of process deviations and optimization potentials. Key project milestones include connecting the required data sources, building self-service reports, and implementing automated alerts for deviations in the process flow. The challenge lies in the technical and professional integration of heterogeneous systems and data flows to ensure consistent monitoring and control of the ordering process. - Analysis and documentation of requirements in the Omnichannel area using requirements management tools and structured collection methods - Professional and technical analysis of existing data sources and ETL processes using database tools - Recording and evaluation of existing interfaces between source and target systems based on technical documentation - Consulting on technical integration of defined data sources into the Celonis environment considering the tools used (Celonis EMS, Data Pool and Data Push API) - Creation of technical queries and representations for process visualization based on provided platform functions (Celonis PQL, Studio) - Use of system-side functions for visualization and analysis of existing business processes (via Celonis Process Explorer) - Professional consulting on technical interfaces, data provision and systemic requirements

- Customizing / parametrization of the core banking system according to business requirements - Maintaining daily operations - Initial and advanced training of internal staff

We are looking for an experienced consultant for a process and project initiative in the area of Asset P&L (Profit and Loss) at a leading international financial services provider. - Typical areas of responsibility in this role:** - Analyze and document existing end-to-end P&L processes for various asset classes (e.g. equities, fixed income, derivatives). - Identify weaknesses, risks and inefficiencies in data collection, processing and reporting. - Design and conceptualize optimized target processes for P&L calculation and attribution. - Create functional specifications and business requirements for adapting or introducing IT systems (e.g. P&L engines, data warehouses). - Manage the implementation of new processes and tools, including milestone planning, stakeholder management and test coordination. - Develop control mechanisms to ensure data quality and consistency. - Prepare training materials and conduct workshops for business areas (trading, controlling, risk). - Relevant technologies, tools or methods:** - Advanced Analytics: MS Excel (Pivot, Power Query, VBA), SQL. - Business Intelligence: Tableau, Power BI, Qlik. - Project Management: Jira, Confluence, MS Project. - ERP/Finance Systems: SAP FI/CO, Oracle Financials, or industry-specific asset management platforms. - Methods: Business Process Model and Notation (BPMN 2.0), agile project management (Scrum/Kanban). - Typical KPIs or success metrics:** - Reduction in P&L creation time (cycle time): target >25% efficiency improvement. - Decrease in manual correction entries: target >50% reduction through process automation. - Data quality index: increase "first-time-right" rate in data intake to >99%. - Efficiency ratio (cost-to-income): demonstrate a positive contribution to lowering the ratio. - User adoption rate: acceptance of new processes/tools in the business area >80% after 3 months. - Key challenges, risks or specifics:** - Heterogeneous system landscapes and inconsistent data sources (data silos). - High complexity of financial products and valuation models. - Resistance to process changes in business areas (change management). - Ensuring compliance with regulatory requirements (e.g. IFRS 9, BCBS 239). - Time- and budget-critical implementation during ongoing operations. - Concrete deliverables:** - Milestone 1: Completed as-is analysis and process documentation. - Deliverable 1: Detailed analysis report including risk assessment. - Milestone 2: Finalized target concept and business requirements document. - Deliverable 2: Implementation roadmap and project plan. - Milestone 3: Successful user acceptance test (UAT) of the new process/tool. - Deliverable 3: Acceptance protocols, training materials and project closure report.

A company is looking for an experienced expert in P2P / Purchase to Pay / Procure to Pay to merge the IT finance systems of two entities. The goal of the project is to ensure smooth system integration and optimize processes. In this role, the expert will work closely with relevant stakeholders to analyze requirements, develop solutions, and support the implementation. Main tasks: - Analyze the current IT finance systems of both entities - Develop a strategy for system consolidation - Optimize P2P processes - Support implementation and integration - Collaborate with internal teams and external partners - Ensure compliance with finance and regulatory guidelines

An organization is looking for an experienced consultant with expertise in security concepts, SAP ILM, deletion concepts and E-Commerce. The goal of the project is to analyze existing processes, optimize security and deletion concepts, and ensure compliance with data protection regulations. The consultant will work closely with internal teams to develop and implement tailored solutions. Main tasks: - Analyze existing security and deletion concepts - Optimize and implement SAP ILM processes - Advise on E-Commerce security requirements - Ensure compliance with data protection regulations - Support documentation and training of internal teams

A company is looking for an experienced Technical Editor responsible for creating and managing data sheets, product brochures, and catalogs. These documents are crucial for sales, legally binding, and part of internal quality assurance. The product brochures showcase the key product features and customer benefits, while the data sheets contain detailed specifications. The role includes independently managing and overseeing all correction and review processes until final approval, as well as ensuring the defined quality and release processes according to company guidelines. In addition, filing the final data in the relevant systems such as the Promo Office database, PDM, and internet CMS is required. - Creation of data sheets, product brochures, and catalogs according to specifications. - Preparation of data for print production and ISO-compliant archiving in the product management system. - Management of versioned documents for print production and online publication. - Ensuring the defined quality and release processes. - Filing the final data in the relevant systems.

On behalf of a leading medical technology company, an experienced technical draftsman or product designer is sought for creating and maintaining technical documentation and design drawings. - **Typical tasks:** - Creating standardized 2D manufacturing drawings and 3D models of parts and assemblies using CAD software. - Detailing and dimensioning designs considering form and position tolerances. - Creating and managing bills of materials and technical documents in the PDM/PLM system (e.g. SAP ECTR). - Implementing change orders on existing drawings and documentation. - Close collaboration with the development and manufacturing departments to ensure producibility. - **Relevant technologies, tools or methods:** - CAD systems: Siemens NX, SolidWorks, CATIA V5, Autodesk Inventor (depending on client system) - PDM/PLM systems: SAP ECTR, Teamcenter, Windchill - Standards: Sound knowledge of relevant ISO and DIN standards for technical drawings, especially in a regulated environment. - ERP systems: SAP S/4HANA - **Typical KPIs or success metrics:** - On-time delivery of drawings and documents. - Error rate in technical documentation (number of required correction loops). - Compliance with internal and external design and documentation standards. - Efficiency in implementing changes (throughput time). - **Special challenges, risks or specifics:** - High demands on accuracy and completeness of documentation due to strict regulatory requirements in medical technology (MDR). - Comprehensive traceability of changes (version control). - Complexity of the parts to be designed (e.g. freeform surfaces, complex assemblies). - Close coordination with various stakeholders (development, procurement, quality assurance, manufacturing). - **Specific deliverables:** - Approval-ready 2D manufacturing drawings and 3D CAD models. - Complete and released bills of materials in the ERP system. - Updated technical product documentation. - Change logs. - **Lessons learned/best practices:** - A clear and standardized template management speeds up the creation process significantly. - Regular alignment meetings with manufacturing can prevent costly errors early on. - Careful maintenance of master data in the PDM/PLM system is the basis for efficient collaboration.

For a project in the power plant environment, a freelance specialist is urgently needed for the migration and adaptation of the ABB 800xA control system. - Typical tasks in this role:** - Implementation of programming and commissioning with the ABB 800xA process control system. - Migration of existing control system logic to the new system version, including adaptation of controllers and I/O modules. - Creation and adjustment of process graphics, user interfaces and alarm management configurations. - Performing system tests, error analysis and performance optimizations to ensure plant availability and controllability. - Technical support for operational staff during commissioning and ramp-up phases. - Creation and maintenance of technical documentation (functional diagrams, configuration descriptions, test protocols). - Close collaboration with process engineering, electrical engineering and the plant operator. - Relevant technologies, tools or methods:** - Control system: ABB Ability™ System 800xA (including AC 800M controller, Information Management, Batch Control). - Engineering tools: Control Builder M, Process Graphics Migration Tool, Bulk Data Manager. - Fieldbuses: PROFIBUS, Foundation Fieldbus, Modbus. - Virtualization: VMware, Hyper-V for test and development environments. - Databases: Knowledge of SQL for analyzing historical data (e.g., 800xA History). - Familiarity with relevant standards for process and power plant engineering (e.g., IEC 61508, IEC 61511). - Typical KPIs or success metrics:** - Migration speed: Number of migrated system components/functions per week/month. - System availability: Control system uptime after migration > 99.9%. - Commissioning error rate: Number of critical software bugs after go-live < 5. - Test coverage: Percentage of successfully executed and documented test cases > 95%. - Adherence to project schedule: Completion of migration and commissioning by the defined deadline. - Operator acceptance: Positive feedback from operational staff on the new system environment. - Special challenges, risks or specifics:** - Migration during ongoing operation ("brownfield") with minimal downtime. - Ensuring compatibility between old and new system components (hardware/software). - High complexity of process logic in power plants (e.g., boiler control, turbine regulation). - Risk of cybersecurity vulnerabilities in networked control systems (e.g., CVEs for 800xA). - Management of interfaces to third-party systems (e.g., MES, ERP). - Need for intensive and precise collaboration between control technology, process engineering and operations. - Concrete deliverables:** - Migrated and operational control logic on the target system. - Fully tested and customer-approved process graphics and user interfaces. - Acceptance protocols for Factory Acceptance Test (FAT) and Site Acceptance Test (SAT). - Updated technical plant documentation. - Final migration report with lessons learned. - Trained operational staff.

A company is looking for a creative POS designer who develops and implements innovative ideas for hospitality spaces. The goal of the project is to increase visibility and brand presence through creative POS solutions. The focus is on developing and visualizing new concepts that comply with CI/CD guidelines and market standards. The role requires close collaboration with a large field sales team as well as small agencies and workshops. - Develop new POS ideas for hospitality spaces (e.g., back counters, bar solutions, illuminated logos, displays) - Visualize and present creative approaches - Collaborate closely with the field team (80 people in sales) - Support POS marketing with a strong focus on visibility and brand presence - Execute projects in line with CI/CD guidelines and market standards - Work with small agencies or workshops for implementation

- IT project manager activities - Interface/bridging role between business area and technology, requiring solid subject matter knowledge.

- A company is seeking an experienced interim procurement professional to support its Amsterdam office due to a departing colleague. - The role will end once a permanent successor is found, with the possibility of extension depending on the recruitment process. - The professional will act as the sole representative of a group-wide procurement organization in the Amsterdam office, working closely with a team of nine spread across Europe. - The role involves managing end-to-end procurement processes for both existing and new suppliers, focusing on Marketing and Professional Services categories. - The professional will ensure adherence to procurement standards, negotiate prices, and compare offers in collaboration with business owners. - The onboarding will primarily be remote, with occasional in-person days in Amsterdam.

The client runs the Ad Manager, a self-service portal for business customers to book and manage advertising products on the GMX and WEB.DE email portals. The Ad Manager is already live and serves as the central platform for campaign management in the B2B sector. There is currently a separate B2B portal called the trusted Dialog Manager, whose features are to be merged into the Ad Manager. Project goal The goal is the technical and functional enhancement of the Ad Manager with features from the trusted Dialog Manager. In the first step, a unified login system will be implemented. Building on that, existing trusted Dialog features will be gradually migrated and become centrally available in the Ad Manager. Since the trusted Dialog Manager was not previously a self-service tool, this integration also significantly improves user-friendliness and accessibility. The focus of this call for tenders is especially on frontend development (Angular, CSS, HTML). Scope of services - Unified Login System: Integration of trusted Dialog features into the Ad Manager via a central authentication mechanism. - Domain Overview Page: Development of an overview page with DKIM details, logo/avatar preview, and status information (active, inactive, ready for completion). - Auth Code Creation: Development of a function to generate time-limited authentication codes for tagging test emails. - Overlay Testmail Intro: Development of an overlay as a step-by-step guide for sending test emails. - Software Design: Incorporating current Angular best practices to optimize the codebase in terms of structure, reusability, and maintainability.

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact on-site for electrical commissioning issues, reviewing complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary. Clear communication with stakeholders and independent client-side representation are key aspects of this role. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: If blame is justified → propose and implement a solution. If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

A company is looking for an experienced engineering expert in sterile filling to support a challenging project in pharmaceutical production. The goal of the project is to optimize the efficiency and quality of filling processes and ensure that all regulatory requirements are met. In this role, the expert will work closely with the internal team to develop technical solutions, analyze existing processes, and implement improvements. Main tasks: - Analyze and optimize processes in sterile filling - Ensure compliance with GMP and other regulatory requirements - Develop and implement technical solutions for process improvement - Collaborate with interdisciplinary teams - Document and report progress and results

A company is looking for a specialist construction manager in electrical engineering and a specialist construction manager in process control (Siemens T3000) for a challenging project. The goal of the project is the technical monitoring and management of the process control interfaces of the existing plant during the integration of the new system, and to ensure quality and contractual compliance during the construction and commissioning phases. The role requires intensive coordination and oversight of interfaces with construction planning due to the size of the project. The construction manager will work closely with process control engineers, planners, experts, and contractors to ensure successful project implementation. Main responsibilities: - Technical monitoring of the process control interfaces of the existing plant during the integration of the new system - Technical management of process control engineers, planners, experts, and contractors - Preparation of specialized and project-phase specific documents - Participation in project meetings and negotiations - Technical management of quality assurance and quality control during the construction and commissioning phases - Advising on process control commissioning - Technical coordination with design engineers on quality monitoring tasks - Monitoring contractual compliance and conducting quality inspections - Participation in safety meetings and implementation of measures to address identified deficiencies

For the further development of a complex ServiceNow platform, a developer specialized in the middle layer is sought. The focus is on implementing business logic, integrations, and processing data between the frontend and backend systems. - **Typical responsibilities:** - Designing and developing server-side business logic in ServiceNow using business rules, script includes, and workflows. - Designing, implementing, and maintaining REST- and SOAP-based integrations with third-party systems (e.g., SAP, Jira, HR systems) via IntegrationHub or custom scripts. - Developing and optimizing data flows and transformations within the platform. - Analyzing performance and optimizing server-side scripts and database interactions. - Ensuring platform stability and security through robust, error-resistant coding. - **Relevant technologies, tools, or methods:** - ServiceNow platform: in-depth knowledge of the Glide API (GlideRecord, GlideSystem), server-side scripting (JavaScript ES5). - Integrations: IntegrationHub (spokes), REST/SOAP API Explorer, JSON, XML. - Automation: Flow Designer, Workflow Editor. - Development tools: ServiceNow Studio, VS Code with ServiceNow plugins. - Methodology: Agile (Scrum), use of update sets and application scopes for deployment. - **Typical KPIs or success metrics:** - Transaction response times for critical middle layer processes. - Error rate for API calls and integrations (< 1%). - Success rate of automated workflows. - Code complexity (e.g., measured via SonarQube integration). - Adoption rate of new features enabled by the middle layer. - **Key challenges, risks, or specifics:** - Complexity of dependencies between different ServiceNow modules and external systems. - Ensuring scalability under high transaction volumes. - Debugging asynchronous processes and integrations. - Adhering to ServiceNow best practices to keep the platform upgradeable ("out-of-the-box" vs. customizing). - **Specific deliverables:** - Implemented and tested script includes and business rules. - Fully configured and documented integrations in IntegrationHub. - Technical documentation of developed logic and data flows. - Completed update sets ready for deployment to production. - **Lessons learned/best practices:** - Encapsulate reusable logic in script includes instead of duplicating it across multiple business rules. - Prefer asynchronous business rules for long-running operations to avoid blocking the user experience. - Use Flow Designer over the classic Workflow Editor for new automations.