For a project in the power plant environment, a freelance specialist for migrating and adapting the ABB 800xA control system is needed at short notice. - Typical tasks in this role:** - Implementation of programming and commissioning with the ABB 800xA process control system. - Migration of existing control system logic to the new system version, including adaptation of controllers and I/O modules. - Creation and adjustment of process graphics, operator interfaces and alarm management configurations. - Execution of system tests, error analysis and performance optimizations to ensure plant availability and controllability. - Technical support of operations staff during the commissioning and ramp-up phase. - Preparation and maintenance of technical documentation (functional diagrams, configuration descriptions, test protocols). - Close cooperation with the process engineering, electrical engineering departments and the plant operator. - Relevant technologies, tools or methods:** - Control system: ABB Ability™ System 800xA (including AC 800M controller, information management, batch control). - Engineering tools: Control Builder M, Process Graphics Migration Tool, Bulk Data Manager. - Fieldbuses: PROFIBUS, Foundation Fieldbus, Modbus. - Virtualization: VMware, Hyper-V for test and development environments. - Databases: SQL knowledge for historical data analysis (e.g., 800xA History). - Knowledge of relevant standards for process and power plant engineering (e.g., IEC 61508, IEC 61511). - Typical KPIs or success metrics:** - Migration speed: number of system components/functions migrated per week/month. - System availability: control system uptime after migration > 99.9%. - Commissioning error rate: number of critical software bugs after go-live < 5. - Test coverage: percentage of successfully executed and documented test cases > 95%. - Adherence to project schedule: completion of migration and commissioning by the defined deadline. - Operator acceptance: positive feedback from operations staff on the new system environment. - Key challenges, risks or specifics:** - Migration in running operation ("brownfield") with minimal downtime. - Ensuring compatibility between old and new system components (hardware/software). - High complexity of process logic in power plants (e.g., boiler control, turbine regulation). - Risk of cybersecurity vulnerabilities in networked control systems (e.g., CVEs for 800xA). - Management of interfaces to third-party systems (e.g., MES, ERP). - Need for intensive and precise collaboration between control engineering, process engineering and operations. - Concrete deliverables:** - Migrated and operational control logic on the target system. - Fully tested and customer-approved process graphics and operator interfaces. - Acceptance protocols for Factory Acceptance Test (FAT) and Site Acceptance Test (SAT). - Updated technical plant documentation. - Final migration report with lessons learned. - Trained operations staff.

A company is looking for a specialist Construction Manager for Electrical Engineering and a specialist Construction Manager for Process Control (Siemens T3000) for a challenging project. The goal of the project is the technical monitoring and control of the process control interfaces of the existing plant during the integration of the new system, as well as ensuring quality and contractual compliance during the construction and commissioning phase. The role requires intensive coordination and oversight of planning interfaces due to the size of the project. The Construction Manager will work closely with control engineers, planners, experts, and contractors to ensure the successful delivery of the project. Main tasks: Professional monitoring of the process control interfaces of the existing plant during the integration of the new system Professional management of control engineers, planners, experts, and contractors - Preparation of specialized and project phase–dependent documents - Participation in project meetings and negotiations - Supervision of quality assurance and quality control during the construction and commissioning phase - Advice on process control commissioning - Technical coordination with design engineers on quality monitoring tasks - Monitoring contractual compliance and performing quality audits - Participation in safety meetings and implementation of measures to address identified issues

A company is seeking support for a project aimed at transparently mapping the overall ordering process in the Portals area. The goal is to combine relevant data sources from order to activation to enable a holistic view of the end-to-end process. This should facilitate the identification of process deviations and optimization potentials. Key project milestones include connecting the required data sources, building self-service reports, and implementing automated alerts for deviations in the process flow. The challenge lies in the technical and professional integration of heterogeneous systems and data flows to ensure consistent monitoring and control of the ordering process. - Analysis and documentation of requirements in the Omnichannel area using requirements management tools and structured collection methods - Professional and technical analysis of existing data sources and ETL processes using database tools - Recording and evaluation of existing interfaces between source and target systems based on technical documentation - Consulting on technical integration of defined data sources into the Celonis environment considering the tools used (Celonis EMS, Data Pool and Data Push API) - Creation of technical queries and representations for process visualization based on provided platform functions (Celonis PQL, Studio) - Use of system-side functions for visualization and analysis of existing business processes (via Celonis Process Explorer) - Professional consulting on technical interfaces, data provision and systemic requirements

A company is looking for a Siemens PLC Programmer to support a hybrid setup in Siegen. The project focuses on programming and optimizing Siemens PLC systems, particularly within the steel industry. The role requires expertise in S120 and G120 servo drives. The ideal candidate should live close to Siegen to facilitate on-site work when required. Key responsibilities: - Programming and optimizing Siemens PLC systems. - Working with S120 and G120 servo drives. - Collaborating with the team to ensure smooth operations in a hybrid setup. - Troubleshooting and resolving technical issues. - Ensuring compliance with industry standards and safety regulations.

Typical tasks: - Analyze existing insurance processes and identify digitalization potentials - Gather and document business requirements together with departments - Create solution concepts for digital transformation (incl. process modeling and cost-benefit analyses) - Act as liaison between business and IT: translate requirements into technical concepts and support implementation - Support project management in planning and rolling out new digital solutions (agile methods like Scrum/Kanban) Relevant tools & technologies: BPMN modeling tools (e.g. Visio, Signavio), requirements management (Jira, Confluence), knowledge of common insurance IT systems, MS Office KPIs & metrics: adherence to project milestones and budgets, reduction of process cycle times, increase in customer satisfaction/user acceptance, reduction of manual efforts through automation Challenges: aligning diverse stakeholders in the insurance environment (departments, IT, regulatory), integrating new digital solutions into existing legacy systems, handling regulatory requirements and data privacy, change management and user adoption Deliverables: comprehensive requirements documents and process models, developed business concepts and user stories for IT implementation, defined implementation roadmap, training materials for modified processes Lessons Learned: involving all stakeholders early on makes digitalization projects easier; iterative, agile approaches allow flexible adjustments; deep industry knowledge (products, regulation) is crucial to design sustainable digital solutions

- Performing and handling change processes (supplier change, new registration, move-in/move-out) - Independently handling clarification cases with analysis of rejection reasons and follow-up - Supporting market communication and related areas (e.g., meter reading, billing) at least at 2nd-level - Ensuring smooth workflows within energy industry processes

We are looking for an experienced consultant for a process and project initiative in Asset P&L (Profit and Loss) at a leading international financial services provider. - Typical responsibilities in this role:** - Analyze and document the existing end-to-end P&L processes for various asset classes (e.g., equities, fixed income, derivatives). - Identify weaknesses, risks, and inefficiencies in data collection, processing, and reporting. - Design and develop optimized target processes for P&L calculation and attribution. - Create functional specifications and business requirements for adapting or introducing IT systems (e.g., P&L engines, data warehouses). - Manage the implementation of the new processes and tools, including milestone planning, stakeholder management, and test coordination. - Develop controls to ensure data quality and consistency. - Prepare training materials and conduct workshops for business areas (trading, controlling, risk). - Relevant technologies, tools, or methods:** - Advanced analytics: MS Excel (Pivot, Power Query, VBA), SQL. - Business Intelligence: Tableau, Power BI, Qlik. - Project management: Jira, Confluence, MS Project. - ERP/Finance systems: SAP FI/CO, Oracle Financials, or industry-specific asset management platforms. - Methods: Business Process Model and Notation (BPMN 2.0), agile project management (Scrum/Kanban). - Typical KPIs or success metrics:** - Reduction in P&L cycle time: target >25% efficiency gain. - Decrease in manual correction entries: target >50% reduction through process automation. - Data quality index: increase in first-time-right rate on data intake to >99%. - Efficiency ratio (cost-to-income): demonstrate a positive impact on lowering the ratio. - User adoption rate: acceptance of new processes/tools in the business area >80% after 3 months. - Key challenges, risks, or specifics:** - Heterogeneous system landscapes and inconsistent data sources (data silos). - High complexity of financial products and valuation models. - Resistance to process changes in business areas (change management). - Ensuring compliance with regulatory requirements (e.g., IFRS 9, BCBS 239). - Time- and budget-critical implementation while ongoing operations. - Concrete deliverables:** - Milestone 1: completed as-is analysis and process documentation. - Deliverable 1: detailed analysis report including risk assessment. - Milestone 2: finalized target concept and business requirements document. - Deliverable 2: implementation roadmap and project plan. - Milestone 3: successful user acceptance test (UAT) of the new process/tool. - Deliverable 3: acceptance protocols, training materials, and project closure report.

A company is looking for an experienced expert with in-depth knowledge of License Manager, Inventory Server, and Integration Manager. The goal of the project is to optimize existing systems, integrate them, and ensure that all processes run efficiently and smoothly. In this role, the expert will work closely with internal teams to analyze requirements, implement solutions, and monitor systems. Key responsibilities: - Analyze and optimize existing systems (License Manager, Inventory Server, Integration Manager) - Integrate new processes and tools - Collaborate with internal teams to analyze requirements - Ensure system efficiency and security - Document and train teams

- Customizing / parametrization of the core banking system according to business requirements - Maintaining daily operations - Initial and advanced training of internal staff

- Operational control and management of material requirement planning and provisioning, as well as maintenance of material master data for an efficient material flow - Ensuring and monitoring the operational material flow and proactively initiating measures in case of deviations, in close coordination with suppliers and internal stakeholders - Optimizing inventory levels in terms of tied-up capital costs, material coverage, and demand fulfillment - Contributing to the further development of processes and organization of the Material Management department

For an internationally active special machine manufacturer, we are looking for an experienced PLC programmer to implement challenging automation projects. The focus is on new programming and commissioning of control systems. - Typical tasks: development, testing and documentation of PLC software for new plants using Siemens SIMATIC S7 (TIA Portal) and/or CODESYS V3. Creation and adaptation of HMI visualizations (e.g. with WinCC Unified, TwinCAT HMI). Commissioning machines and plants on-site (including I/O checks, configuration of fieldbus systems like Profinet/EtherCAT, functional tests). Systematic error analysis and optimization of existing plants. Technical support for customer service. - Relevant technologies/tools: Siemens TIA Portal, SIMATIC S7-1500, CODESYS V3, Beckhoff TwinCAT, WinCC, various fieldbus configurators, EPLAN P8 (reading circuit diagrams). - KPIs/success metrics: adherence to development and commissioning schedules, reduction of commissioning time through high software quality, machine cycle time and availability (OEE), customer satisfaction after commissioning. - Special challenges: integration of hardware and software components from different manufacturers. Working under time pressure during on-site commissioning. Ensuring functional machine safety (safety PLC) according to standards (e.g. ISO 13849-1). - Deliverables: operational, fully documented PLC programs, final HMI projects, signed commissioning and acceptance protocols, creation or addition of operating manuals. - Best practices: structured programming according to standards (e.g. IEC 61131-3), modular and reusable software blocks, consistent versioning of code (e.g. in Git).

The ProMi Squad (Process Mining) project aims to fully map the end-to-end order process in the portals area with full transparency. Relevant data sources from order placement to activation are consolidated. This holistic view of the process enables the identification of process deviations and optimization opportunities. Key project milestones include connecting the required data sources, building self-service reports, and implementing automated alerts for process deviations. The challenge lies in the technical and business consolidation of heterogeneous systems and data flows to ensure consistent monitoring and control of the order process. ⸻ Service description - Analyze and document requirements in the omnichannel area using requirement management tools and structured elicitation methods - Perform business and technical analysis of existing data sources and ETL processes using database tools - Capture and evaluate existing interfaces between source and target systems based on technical documentation - Advise on the technical integration of defined data sources into the Celonis environment, considering tools like Celonis EMS, Data Pool, and Data Push API - Create technical queries and visuals for process representation using platform features (Celonis PQL, Studio) - Use built-in system functions to visualize and analyze current business processes (via the Celonis Process Explorer) - Provide business advice on technical interfaces, data provisioning, and system prerequisites

A company is looking for an experienced engineering expert in sterile filling to support a demanding project in pharmaceutical production. The goal of the project is to optimize the efficiency and quality of the filling processes and ensure that all regulatory requirements are met. In this role, the expert will work closely with the internal team to develop technical solutions, analyze existing processes, and implement improvements. Main tasks: - Analyze and optimize processes in sterile filling - Ensure compliance with GMP and other regulatory requirements - Develop and implement technical solutions for process improvement - Collaborate with interdisciplinary teams - Document and report on progress and results

Project description As part of the implementation and optimization of the **Multi Domain Orchestration and Inventory (MDOI)** tool in the mobile transport domain (B2X), the focus is on planning, setup, commissioning, management, and optimization of several thousand fixed and mobile network devices. The application allows the selection and configuration of suitable devices and technologies for their efficient use to achieve maximum network coverage and customer satisfaction. Efficiently managing these projects and processes while increasing automation requires the use of the MDOI software solution. Description of services without personal reference - **IT Project Management**: Creating software rollout and migration plans for the application's two-month releases of MDOI, based on Blueplanet, considering all relevant dependencies using JIRA and stakeholder management - **Design Management**: Planning and creating all relevant designs, as well as reviewing them in the Multi Domain Orchestration and Inventory (MDOI) tool for the transport networks area, as an implementation description of the requirements using JIRA and Confluence - **Stakeholder Management**: Developing and executing communication measures for software changes based on the created designs, checking whether the requirements are fully covered by the designs, including preparing documentation for management using Microsoft Outlook, Microsoft Teams, and JIRA

A company is looking for an experienced project manager with a civil engineering background for the power plant or energy industry. The goal of the project is to lead the planning, coordination and implementation of construction projects in the energy and power plant sector. The role requires close cooperation with interdisciplinary teams to ensure projects are completed on time and within budget. It is explicitly stated that construction supervisors are not being sought. Main tasks: - Managing and overseeing construction projects in the power plant or energy industry - Coordinating between different disciplines and external partners - Ensuring compliance with safety and quality standards - Creating and monitoring project plans and budgets - Identifying and resolving technical challenges - Reporting to stakeholders and management

A company is looking for an experienced technical project manager in the field of district heating. The project’s goal is the planning and construction of district heating pipelines through all service phases of the HOAI as well as taking on complex project tasks. The project manager will play a key role in controlling and coordinating projects, working closely with engineering firms, municipalities, authorities and internal contacts. The role includes developing and optimizing planning options to maximize project efficiency and sustainability. In addition, the project manager will continuously improve technical planning guidelines and processes, carry out technical-economic analyses, develop scenarios and create concepts. Another focus is on budget planning for network investments in the heating sector, in close coordination with central controlling, as well as carrying out network calculations. - Planning and construction of district heating pipelines through all service phases of the HOAI. - Controlling and coordinating projects in cooperation with engineering firms, municipalities, authorities and internal contacts. - Developing and optimizing planning options to increase efficiency and sustainability. - Supporting the improvement of technical planning guidelines and processes. - Conducting technical-economic analyses and developing scenarios and concepts. - Preparing budget plans for network investments in the heating sector. - Performing network calculations.

A company is looking for an experienced consultant with expertise in security concepts, SAP ILM, deletion concepts and e-commerce. The goal of the project is to analyze existing processes, optimize security and deletion concepts, and ensure compliance with data protection regulations. The consultant will work closely with internal teams to develop and implement tailored solutions. Key tasks: - Analyze existing security and deletion concepts - Optimize and implement SAP ILM processes - Advise on e-commerce security requirements - Ensure compliance with data protection regulations - Support documentation and training of internal teams

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact on-site for electrical commissioning issues, reviewing complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary. Clear communication with stakeholders and independent client-side representation are key aspects of this role. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: If blame is justified → propose and implement a solution. If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

- A company is seeking an experienced interim procurement professional to support its Amsterdam office due to a departing colleague. - The role will end once a permanent successor is found, with the possibility of extension depending on the recruitment process. - The professional will act as the sole representative of a group-wide procurement organization in the Amsterdam office, working closely with a team of nine spread across Europe. - The role involves managing end-to-end procurement processes for both existing and new suppliers, focusing on Marketing and Professional Services categories. - The professional will ensure adherence to procurement standards, negotiate prices, and compare offers in collaboration with business owners. - The onboarding will primarily be remote, with occasional in-person days in Amsterdam.

Managing a strategic digitization project in a hospital network, e.g. implementing a new HIS or an ePA in line with KHZG. - **Typical responsibilities:** - Overall responsibility for project planning, management and control (time, budget, quality). - Managing the interdisciplinary project team. - Requirements, risk and stakeholder management. - Planning and managing change management and rollouts. - Ensuring compliance with regulatory requirements (KHZG, GDPR). - **Relevant technologies, tools & methods:** - HIS systems (Orbis, iMedOne), ePA solutions. - Standards: HL7, FHIR. - Methods: PRINCE2, PMI/PMBOK, agile/hybrid. - Tools: MS Project, Jira, Confluence. - **Typical KPIs & success metrics:** - KHZG compliance, user adoption rate (>85%), process efficiency, milestone adherence. - **Key challenges & risks:** - High process complexity, intensive stakeholder management, interoperability, data security. - **Deliverables:** - Project plan, status reports, requirements spec (Lastenheft), change concept, cutover plan, project closure report.