- Operational control and management of material requirements planning and provisioning, as well as maintenance of material master data for an effective material flow - Ensuring and monitoring the operational material flow and proactively initiating measures in case of deviations, in close coordination with suppliers and internal stakeholders - Optimizing inventory levels with regard to capital tied up, material coverage, and ensuring supply - Contributing to the further development of processes and organization of the Material Management department

A company is looking for an experienced engineering expert in sterile filling to support a challenging project in pharmaceutical production. The goal of the project is to optimize the efficiency and quality of filling processes and ensure that all regulatory requirements are met. In this role, the expert will work closely with the internal team to develop technical solutions, analyze existing processes, and implement improvements. Main tasks: - Analyze and optimize processes in sterile filling - Ensure compliance with GMP and other regulatory requirements - Develop and implement technical solutions for process improvement - Collaborate with interdisciplinary teams - Document and report progress and results

A company is seeking support for a project aimed at transparently mapping the overall ordering process in the Portals area. The goal is to combine relevant data sources from order to activation to enable a holistic view of the end-to-end process. This should facilitate the identification of process deviations and optimization potentials. Key project milestones include connecting the required data sources, building self-service reports, and implementing automated alerts for deviations in the process flow. The challenge lies in the technical and professional integration of heterogeneous systems and data flows to ensure consistent monitoring and control of the ordering process. - Analysis and documentation of requirements in the Omnichannel area using requirements management tools and structured collection methods - Professional and technical analysis of existing data sources and ETL processes using database tools - Recording and evaluation of existing interfaces between source and target systems based on technical documentation - Consulting on technical integration of defined data sources into the Celonis environment considering the tools used (Celonis EMS, Data Pool and Data Push API) - Creation of technical queries and representations for process visualization based on provided platform functions (Celonis PQL, Studio) - Use of system-side functions for visualization and analysis of existing business processes (via Celonis Process Explorer) - Professional consulting on technical interfaces, data provision and systemic requirements

- Establishment of a future O2C standard process in S/4 HANA for a retail customer with a focus on O2C integration and planned handling of the merchandise management system - The existing merchandise management system for trade goods will still be used for all logistics processes and is out of scope. - Requirements definition for interfaces - Process definition and harmonization: Establish company-wide standard processes in S/4 and in O2C process integration for the areas/entities involved (B2C, B2B, B2G) - O2C integration: Definition of the level of integration of third-party systems: - Best possible compliance with legal reporting and documentation obligations - S/4 as the leading system for executing intercompany transactions - Billing flow and invoicing - Price conditions - Rebates - Contracts What should be done for these topics during the Explore phase? - Preparation and facilitation of Fit To Standard workshops (including building a prototype in the sandbox system for the workshops) - Documentation of the results of the Fit To Standard workshops in a BPML up to level 5 - Documentation of gaps/requirements - Process design and documentation of functional concepts (Confluence + Signavio)

Typical tasks: - Analyze existing insurance processes and identify digitalization potentials - Gather and document business requirements together with business units - Create solution concepts for digital transformation (including process modeling and cost-benefit analyses) - Act as liaison between business and IT: translate requirements into technical concepts and support implementation - Support project management in planning and implementing new digital solutions (agile methods like Scrum/Kanban) Relevant tools & technologies: BPMN modeling tools (e.g. Visio, Signavio), requirements management (Jira, Confluence), knowledge of common insurance IT systems, MS Office KPIs & metrics: adherence to project milestones and budgets, reduction of process cycle times, increase in customer satisfaction/user acceptance, reduction of manual efforts through automation Challenges: aligning diverse stakeholders in the insurance environment (business units, IT, regulatory), integrating new digital solutions into existing legacy systems, dealing with regulatory requirements and data protection, change management and user adoption Deliverables: comprehensive requirement documents and process models, developed business concepts and user stories for IT implementation, defined implementation roadmap, training materials for updated processes Lessons learned: early involvement of all stakeholders facilitates the implementation of digitalization projects; iterative, agile approaches allow flexible adjustments; deep industry knowledge (products, regulations) is crucial to design viable digital solutions

- Construction management for the installation of electrical systems in the context of a grid connection project - Ensuring adherence to budget, time and quality goals as well as all relevant legal regulations - Reviewing technical documents such as construction plans, material lists and performance records - Coordination and communication with subcontractors, suppliers and project stakeholders - Interface management and ensuring a smooth project workflow

We are looking for an experienced consultant for a process and project initiative in the area of Asset P&L (Profit and Loss) at a leading international financial services provider. - Typical areas of responsibility in this role:** - Analyze and document existing end-to-end P&L processes for various asset classes (e.g. equities, fixed income, derivatives). - Identify weaknesses, risks and inefficiencies in data collection, processing and reporting. - Design and conceptualize optimized target processes for P&L calculation and attribution. - Create functional specifications and business requirements for adapting or introducing IT systems (e.g. P&L engines, data warehouses). - Manage the implementation of new processes and tools, including milestone planning, stakeholder management and test coordination. - Develop control mechanisms to ensure data quality and consistency. - Prepare training materials and conduct workshops for business areas (trading, controlling, risk). - Relevant technologies, tools or methods:** - Advanced Analytics: MS Excel (Pivot, Power Query, VBA), SQL. - Business Intelligence: Tableau, Power BI, Qlik. - Project Management: Jira, Confluence, MS Project. - ERP/Finance Systems: SAP FI/CO, Oracle Financials, or industry-specific asset management platforms. - Methods: Business Process Model and Notation (BPMN 2.0), agile project management (Scrum/Kanban). - Typical KPIs or success metrics:** - Reduction in P&L creation time (cycle time): target >25% efficiency improvement. - Decrease in manual correction entries: target >50% reduction through process automation. - Data quality index: increase "first-time-right" rate in data intake to >99%. - Efficiency ratio (cost-to-income): demonstrate a positive contribution to lowering the ratio. - User adoption rate: acceptance of new processes/tools in the business area >80% after 3 months. - Key challenges, risks or specifics:** - Heterogeneous system landscapes and inconsistent data sources (data silos). - High complexity of financial products and valuation models. - Resistance to process changes in business areas (change management). - Ensuring compliance with regulatory requirements (e.g. IFRS 9, BCBS 239). - Time- and budget-critical implementation during ongoing operations. - Concrete deliverables:** - Milestone 1: Completed as-is analysis and process documentation. - Deliverable 1: Detailed analysis report including risk assessment. - Milestone 2: Finalized target concept and business requirements document. - Deliverable 2: Implementation roadmap and project plan. - Milestone 3: Successful user acceptance test (UAT) of the new process/tool. - Deliverable 3: Acceptance protocols, training materials and project closure report.

A company is looking for experienced auditors with expertise in the ISO 9001, ISO 14001, ISO/IEC 17021 and ISO 19011 standards. The project’s goal is to conduct audits and ensure compliance with the mentioned standards. The role includes planning, carrying out and documenting audits as well as advising on improvement measures. Main tasks: - Conduct audits according to ISO 9001, ISO 14001, ISO/IEC 17021 and ISO 19011 - Prepare audit reports and documentation - Advise on compliance and improvement measures - Collaborate with internal and external stakeholders - Ensure compliance with legal and normative requirements

A company is looking for an experienced specialist for IT test strategy and governance who ensures compliance with IT test policy requirements and drives the further development of the framework for IT test governance. The goal of the project is to optimize IT test governance by defining and assessing maturity levels and collecting KPIs across all test types. The specialist will also advance the test policy and service portfolio. Main tasks: - Reviewing compliance with IT test policy requirements - Defining and assessing maturity levels (including measurement points) - Collecting KPIs across all test types, including test automation - Further developing the framework for IT test governance, especially the test policy - Advancing the IT test governance service portfolio

An EPC consultant is looking for an experienced Site Manager (Mechanical) to handle a biogas plant project. The goal is to oversee the construction and ensure all mechanical work meets the project requirements. In this role, you will be responsible for monitoring construction and coordinating mechanical work on site. You will work closely with other project stakeholders to ensure schedules, quality standards, and safety regulations are met. - Supervise mechanical construction work at the biogas plant - Ensure compliance with schedules and quality standards - Coordinate subcontractors and suppliers - Conduct regular site inspections and report findings - Assist in resolving technical challenges on site - Adhere to safety regulations and environmental standards

For a project in the power plant environment, a freelance specialist is urgently needed for the migration and adaptation of the ABB 800xA control system. - Typical tasks in this role:** - Implementation of programming and commissioning with the ABB 800xA process control system. - Migration of existing control system logic to the new system version, including adaptation of controllers and I/O modules. - Creation and adjustment of process graphics, user interfaces and alarm management configurations. - Performing system tests, error analysis and performance optimizations to ensure plant availability and controllability. - Technical support for operational staff during commissioning and ramp-up phases. - Creation and maintenance of technical documentation (functional diagrams, configuration descriptions, test protocols). - Close collaboration with process engineering, electrical engineering and the plant operator. - Relevant technologies, tools or methods:** - Control system: ABB Ability™ System 800xA (including AC 800M controller, Information Management, Batch Control). - Engineering tools: Control Builder M, Process Graphics Migration Tool, Bulk Data Manager. - Fieldbuses: PROFIBUS, Foundation Fieldbus, Modbus. - Virtualization: VMware, Hyper-V for test and development environments. - Databases: Knowledge of SQL for analyzing historical data (e.g., 800xA History). - Familiarity with relevant standards for process and power plant engineering (e.g., IEC 61508, IEC 61511). - Typical KPIs or success metrics:** - Migration speed: Number of migrated system components/functions per week/month. - System availability: Control system uptime after migration > 99.9%. - Commissioning error rate: Number of critical software bugs after go-live < 5. - Test coverage: Percentage of successfully executed and documented test cases > 95%. - Adherence to project schedule: Completion of migration and commissioning by the defined deadline. - Operator acceptance: Positive feedback from operational staff on the new system environment. - Special challenges, risks or specifics:** - Migration during ongoing operation ("brownfield") with minimal downtime. - Ensuring compatibility between old and new system components (hardware/software). - High complexity of process logic in power plants (e.g., boiler control, turbine regulation). - Risk of cybersecurity vulnerabilities in networked control systems (e.g., CVEs for 800xA). - Management of interfaces to third-party systems (e.g., MES, ERP). - Need for intensive and precise collaboration between control technology, process engineering and operations. - Concrete deliverables:** - Migrated and operational control logic on the target system. - Fully tested and customer-approved process graphics and user interfaces. - Acceptance protocols for Factory Acceptance Test (FAT) and Site Acceptance Test (SAT). - Updated technical plant documentation. - Final migration report with lessons learned. - Trained operational staff.

The ProMi Squad (Process Mining) project aims to transparently map the entire order process in the portals area. Relevant data sources from order to activation are combined for this. A holistic view of the end-to-end process makes it possible to identify process deviations and optimization potential. Key milestones of the project are connecting the required data sources, building self-service reports, and implementing automated alerts for process deviations. The challenge lies in the technical and functional integration of heterogeneous systems and data flows to ensure consistent monitoring and control of the ordering process. ⸻ Service Description - Analysis and documentation of requirements in the omnichannel area using requirements management tools and structured elicitation methods - Functional and technical analysis of existing data sources and ETL processes using database tools - Capturing and evaluating existing interfaces between source and target systems based on technical documentation - Consulting on the technical integration of defined data sources into the Celonis environment, taking into account the used tools Celonis EMS, Data Pool, and Data Push API - Creating technical queries and visualizations for process mapping based on the platform features provided (Celonis PQL, Studio) - Using system functions to visualize and analyze existing business processes (via the Celonis Process Explorer) - Functional consulting on technical interfaces, data provisioning, and system prerequisites

A company is seeking support for carrying out the engineering of energy generation and consumption plants and their connection to the transmission and/or distribution grids of network operators in Germany and abroad. The project includes both existing plants and those under development, such as power plants, consumer installations, and hybrid systems like battery installations. The goal is to plan, coordinate, and implement grid connections efficiently. Main tasks: - Managing approval processes for grid connections at the respective voltage level - Preparing technical documents for grid connection requests - Creating grid connection applications, including technical documentation for network operators - Technical engineering for grid connection concepts - Designing extra-high, high, and medium-voltage switchgear and substations - Basic and detailed engineering, including tender documents and specifications - Developing technical standards to implement quality requirements - Control and coordination tasks within project execution - Consulting and coordination for quality assurance measures - Project management in line with technical regulations and project management strategies - Advice on contract management, e.g., grid connection contracts - Coordinating processes and carrying out on-site construction support measures - Developing retrofit concepts for conventional power plants, hydropower plants, and other installations

An organization is looking for an experienced consultant with expertise in security concepts, SAP ILM, deletion concepts and E-Commerce. The goal of the project is to analyze existing processes, optimize security and deletion concepts, and ensure compliance with data protection regulations. The consultant will work closely with internal teams to develop and implement tailored solutions. Main tasks: - Analyze existing security and deletion concepts - Optimize and implement SAP ILM processes - Advise on E-Commerce security requirements - Ensure compliance with data protection regulations - Support documentation and training of internal teams

- A company is seeking an experienced interim procurement professional to support its Amsterdam office due to a departing colleague. - The role will end once a permanent successor is found, with the possibility of extension depending on the recruitment process. - The professional will act as the sole representative of a group-wide procurement organization in the Amsterdam office, working closely with a team of nine spread across Europe. - The role involves managing end-to-end procurement processes for both existing and new suppliers, focusing on Marketing and Professional Services categories. - The professional will ensure adherence to procurement standards, negotiate prices, and compare offers in collaboration with business owners. - The onboarding will primarily be remote, with occasional in-person days in Amsterdam.

- Ensure that access roads are built and prepared according to NKT guidelines - Monitor the proper construction of: - cable pay-off areas - thrust pits - other relevant structures - Oversee last-mile transport to the cable pay-off site - Monitor cable pulling at the pay-off site and in the thrust pit - Collaborate with the civil works supervisor on: - backfilling of thrust pits - dismantling of access roads and pay-off sites - ensuring that splice pits are constructed according to standards and NKT guidelines - Monitor the proper connection of the splices - Monitor the blowing-in and joining of the fiber optic cables (FOC) - Coordinate with the civil works supervisor on the backfilling of splice pits

A company is looking for a specialist construction manager in electrical engineering and a specialist construction manager in process control (Siemens T3000) for a challenging project. The goal of the project is the technical monitoring and management of the process control interfaces of the existing plant during the integration of the new system, and to ensure quality and contractual compliance during the construction and commissioning phases. The role requires intensive coordination and oversight of interfaces with construction planning due to the size of the project. The construction manager will work closely with process control engineers, planners, experts, and contractors to ensure successful project implementation. Main responsibilities: - Technical monitoring of the process control interfaces of the existing plant during the integration of the new system - Technical management of process control engineers, planners, experts, and contractors - Preparation of specialized and project-phase specific documents - Participation in project meetings and negotiations - Technical management of quality assurance and quality control during the construction and commissioning phases - Advising on process control commissioning - Technical coordination with design engineers on quality monitoring tasks - Monitoring contractual compliance and conducting quality inspections - Participation in safety meetings and implementation of measures to address identified deficiencies

A company is looking for an experienced network and project manager with expertise in connecting devices and their interfaces, as well as solid knowledge of modern networking technologies. The goal of the project is to optimize and further develop network solutions, especially in the area of Enterprise WLAN and RADIUS/EAP-TLS. The candidate will take on a key role in project and team management, preferably in an agile environment, and ensure cross-team coordination. - Develop and implement solutions for connecting devices and their interfaces (HTTP/REST) - Optimize and manage Enterprise WLAN/RADIUS/EAP-TLS networks - Lead and manage projects and teams, preferably in an agile environment - Coordinate between various teams and stakeholders - Apply and advance modern networking technologies such as IEEE 802.11/WiFi

A company is looking for an experienced construction supervisor or manager in the fiber optics field to technically oversee and monitor a general contractor’s construction work in FTTH broadband rollout. The goal is to ensure that the construction work follows the execution planning requirements and that the FTTH broadband network is fully deployed. The sites are located near Würzburg and Saarbrücken. The role includes monitoring adherence to schedules, safety regulations, and the quality of construction work, as well as coordinating and documenting construction activities. The manager will independently prepare a construction log and overall documentation, track external services, and verify the accuracy of planning and construction documents. - Technical oversight and monitoring of a general contractor’s construction work in FTTH broadband rollout. - Ensuring compliance with schedules, safety regulations, and quality standards for construction work. - Recording and reviewing planning and construction documents of subcontractors. - Independently preparing a construction log and comprehensive documentation. - Tracking deadlines, inspecting, and documenting ordered services and deliveries. - On-site supervision and safety checks according to the HSE concept.

On behalf of a renowned client in the life sciences industry, we are looking for freelance support in Clinical Data Management. The main task is to take responsibility for coordinating all data management activities in clinical trials. - Typical tasks in this role:** - Creating and reviewing the Data Management Plan (DMP) and the Data Validation Plan (DVP). - Designing and implementing electronic case report forms (eCRFs) in EDC systems (Electronic Data Capture). - Coordinating data collection, validation, and cleaning throughout the study lifecycle. - Developing and executing query processes to resolve data inconsistencies with the study sites. - Medical coding of adverse events (AEs) and medications (e.g. using MedDRA, WHODrug). - Performing SAE reconciliation (matching of serious adverse events). - Preparing and executing the database lock after data collection is complete. - Creating status reports and communicating with the study team (project management, monitoring, biostatistics). - Relevant technologies, tools or methods:** - EDC systems: Medidata Rave, Oracle Clinical, Viedoc, Zelta, OpenClinica. - Programming languages/analysis tools: SAS, R, Python, SQL. - Standards: CDISC (SDTM, ADaM), GCP (Good Clinical Practice), 21 CFR Part 11. - Collaboration tools: MS Teams, Jira, Confluence. - Data visualization: Tableau, Power BI. - Typical KPIs or success metrics:** - Data quality: query rate (number of queries per 1,000 data points) < X; data entry error rate < 1%. - Time management: time from last patient last visit (LPLV) to database lock (target: 4-6 weeks). - Efficiency: average time to resolve queries (target: < 10 business days for critical queries). - Compliance: 100% adherence to milestones and processes defined in the DMP. - Protocol adherence: rate of protocol deviations related to data management < 5%. - Key challenges, risks or specifics:** - Managing increasing data volumes and sources (e.g. wearables, ePROs). - Ensuring data integrity and security (cybersecurity, data protection/GDPR). - Complexity from mid-study changes (protocol amendments) and their impact on the database. - Ensuring consistent data quality across multiple, globally distributed study sites. - Shortage of qualified professionals and high demands for onboarding in study-specific systems. - Specific deliverables:** - Finalized and approved Data Management Plan (DMP). - Live and validated study database (EDC system). - Regular data cleaning reports and status updates. - Clean, quality-assured, and analysis-ready database. - Final locked study database with a complete audit trail. - Archived project documentation after study completion.