A leading automotive supplier is looking for an experienced quality expert for inspecting weld seams on safety-critical body components. The project includes ensuring the highest quality standards through non-destructive testing methods. - Typical tasks: Independent planning, execution, and evaluation of non-destructive tests (NDT), especially visual testing (VT) and ultrasonic testing (UT). Creation and management of test plans and work instructions. Detailed documentation of test results in CAQ systems. Analysis of defect patterns and initiation of corrective actions in close coordination with the welding shop and production planning. Calibration and maintenance of testing equipment. - Relevant technologies/tools: Ultrasonic testing devices, endoscopes, videoscopes, CAQ software (e.g., Babtec, QSYS), knowledge of standards DIN EN ISO 9712, ISO 5817, and relevant VDA volumes. - KPIs/success metrics: First Pass Yield (FPY) > 98%, reduction of internal defect rate (PPM), zero-defect tolerance for safety-critical seams (escape rate = 0), timely completion of test orders. - Special challenges: Assessing complex seam geometries under time pressure. Clear interpretation of test results and distinguishing acceptable irregularities from critical defects. Enforcing quality standards with production. - Deliverables: Completed test reports, detailed defect analyses and reports, updated work and test instructions, contributions to FMEAs (failure modes and effects analysis). - Best practices: Regular team alignment (shopfloor management), continuous improvement of testing processes (CIP), raising awareness and training of production staff.

A company is seeking support for a project aimed at transparently mapping the overall ordering process in the Portals area. The goal is to combine relevant data sources from order to activation to enable a holistic view of the end-to-end process. This should facilitate the identification of process deviations and optimization potentials. Key project milestones include connecting the required data sources, building self-service reports, and implementing automated alerts for deviations in the process flow. The challenge lies in the technical and professional integration of heterogeneous systems and data flows to ensure consistent monitoring and control of the ordering process. - Analysis and documentation of requirements in the Omnichannel area using requirements management tools and structured collection methods - Professional and technical analysis of existing data sources and ETL processes using database tools - Recording and evaluation of existing interfaces between source and target systems based on technical documentation - Consulting on technical integration of defined data sources into the Celonis environment considering the tools used (Celonis EMS, Data Pool and Data Push API) - Creation of technical queries and representations for process visualization based on provided platform functions (Celonis PQL, Studio) - Use of system-side functions for visualization and analysis of existing business processes (via Celonis Process Explorer) - Professional consulting on technical interfaces, data provision and systemic requirements

A company is seeking support in setting up or optimizing a structured funding controlling system for municipal energy, infrastructure, or digitization projects. The goal is to increase efficiency and transparency in the use of funding and ensure compliance with funding regulations. The role includes identifying suitable funding programs at the EU, federal, and state levels, assisting with applications, fund disbursements, and preparation of usage reports. It also involves setting up a monitoring and reporting system (e.g., in Excel) that aligns project plans with funding requirements. Consulting on processes and interfaces such as accounting and project management, as well as training internal teams as needed, are also part of the tasks. - Identification of suitable funding programs (EU, federal, state) - Support with application, fund disbursement, and usage reports - Setting up monitoring/reporting (e.g., in Excel) - Aligning project plans with funding requirements - Consulting on processes and interfaces (e.g., accounting, project management) - Training internal teams as needed

A company is looking for an experienced engineering expert in sterile filling to support a demanding project in pharmaceutical production. The goal of the project is to optimize the efficiency and quality of the filling processes and ensure that all regulatory requirements are met. In this role, the expert will work closely with the internal team to develop technical solutions, analyze existing processes, and implement improvements. Main tasks: - Analyze and optimize processes in sterile filling - Ensure compliance with GMP and other regulatory requirements - Develop and implement technical solutions for process improvement - Collaborate with interdisciplinary teams - Document and report on progress and results

We are looking for an experienced consultant for a process and project initiative in Asset P&L (Profit and Loss) at a leading international financial services provider. - Typical responsibilities in this role:** - Analyze and document existing end-to-end P&L processes for various asset classes (e.g. equities, fixed income, derivatives). - Identify weaknesses, risks, and inefficiencies in data collection, processing, and reporting. - Design and plan optimized target processes for P&L calculation and attribution. - Prepare functional specs and business requirements for adapting or implementing IT systems (e.g. P&L engines, data warehouses). - Manage project implementation of new processes and tools, including milestone planning, stakeholder management, and test coordination. - Develop control mechanisms to ensure data quality and consistency. - Create training materials and lead workshops for business units (trading, controlling, risk). - Relevant technologies, tools, or methods:** - Advanced Analytics: MS Excel (Pivot, Power Query, VBA), SQL. - Business Intelligence: Tableau, Power BI, Qlik. - Project Management: Jira, Confluence, MS Project. - ERP/Finance Systems: SAP FI/CO, Oracle Financials, or industry-specific asset management platforms. - Methods: Business Process Model and Notation (BPMN 2.0), agile project management (Scrum/Kanban). - Typical KPIs or success metrics:** - P&L cycle time reduction: target >25% efficiency gain. - Reduction of manual correction entries: target >50% decrease through process automation. - Data quality index: increase first-time-right data acceptance rate to >99%. - Efficiency ratio (cost-to-income): demonstrate a positive impact on lowering the ratio. - User adoption rate: >80% acceptance of new processes/tools by business units after 3 months. - Key challenges, risks, or specifics:** - Heterogeneous system landscape and inconsistent data sources (data silos). - High complexity of financial products and valuation models. - Resistance to process changes within business units (change management). - Ensuring compliance with regulatory requirements (e.g. IFRS 9, BCBS 239). - Time- and budget-critical execution during ongoing operations. - Deliverables:** - Milestone 1: Completed current-state analysis and process documentation. - Deliverable 1: Detailed analysis report including risk and gap assessment. - Milestone 2: Finalized target concept and Business Requirements Document. - Deliverable 2: Implementation roadmap and project plan. - Milestone 3: Successful user acceptance test (UAT) of the new process/tool. - Deliverable 3: Acceptance minutes, training materials, and project closure report.

For a project in the power plant environment, a freelance specialist for the migration and adaptation of the ABB 800xA control system is needed at short notice. - Typical tasks in this role:** - Implementation of programming and commissioning with the ABB 800xA process control system. - Migration of existing control system logic to the new system version, including adaptation of controllers and I/O modules. - Creation and adjustment of process graphics, operator interfaces, and alarm management configurations. - Execution of system tests, error analysis, and performance optimizations to ensure plant availability and control capability. - Technical support for operations staff during commissioning and ramp-up phases. - Preparation and maintenance of technical documentation (functional diagrams, configuration descriptions, test reports). - Close cooperation with process engineering, electrical engineering, and the plant operator.

On behalf of a renowned client in the life sciences industry, we are looking for a freelance support in Clinical Data Management. The main responsibility is coordinating all data management activities in clinical trials. - Typical responsibilities in this role:** - Creation and review of the Data Management Plan (DMP) and the Data Validation Plan (DVP). - Designing and implementing electronic Case Report Forms (eCRFs) in EDC systems (Electronic Data Capture). - Coordinating data collection, validation, and cleaning across the entire study lifecycle. - Developing and executing query processes to resolve data inconsistencies with investigative sites. - Medical coding of adverse events (AEs) and medications (e.g., using MedDRA, WHODrug). - Performing SAE reconciliation (matching serious adverse events). - Preparing and executing the database lock after data collection is complete. - Creating status reports and communicating with the study team (project management, monitoring, biostatistics). - Relevant technologies, tools or methods:** - EDC systems: Medidata Rave, Oracle Clinical, Viedoc, Zelta, OpenClinica. - Programming languages/analysis tools: SAS, R, Python, SQL. - Standards: CDISC (SDTM, ADaM), GCP (Good Clinical Practice), 21 CFR Part 11. - Collaboration tools: MS Teams, Jira, Confluence. - Data visualization: Tableau, Power BI. - Typical KPIs or success metrics:** - Data quality: query rate (number of queries per 1000 data points) < X; data entry error rate < 1%. - Time management: time from last patient last visit (LPLV) to database lock (target: 4–6 weeks). - Efficiency: average time to query resolution (target: < 10 business days for critical queries). - Compliance: 100% adherence to milestones and processes defined in the DMP. - Protocol adherence: rate of protocol deviations related to data management < 5%. - Key challenges, risks or specifics:** - Managing increasing data volumes and sources (e.g., wearables, ePROs). - Ensuring data integrity and security (cybersecurity, data protection/GDPR). - Complexity from mid-study changes (protocol amendments) and their impact on the database. - Maintaining consistent data quality across multiple global sites. - Shortage of qualified professionals and steep learning curve for study-specific systems. - Concrete deliverables:** - Finalized and approved Data Management Plan (DMP). - Live and validated study database (EDC system). - Regular data cleaning reports and status updates. - Clean, quality-assured database ready for statistical analysis. - Final locked study database with full audit trail. - Archived project documentation after study completion.

The ProMi Squad (Process Mining) project aims to provide a transparent, end-to-end view of the entire ordering process in the portals area. Relevant data sources, from order placement to activation, are brought together for this purpose. The holistic view of the end-to-end process enables identification of process deviations and optimization potentials. Key milestones of the project include connecting the required data sources, building self-service reports, and implementing automated alerts for deviations in the process flow. The challenge is the technical and functional integration of heterogeneous systems and data streams to ensure consistent monitoring and control of the ordering process. - -- Service Description - Analysis and documentation of requirements in the omnichannel area using requirements management tools and structured collection methods - Functional and technical analysis of existing data sources and ETL processes using database tools - Capturing and evaluating the existing interfaces between source and target systems based on technical documentation - Advising on the technical integration of defined data sources into the Celonis environment, taking into account the tools used: Celonis EMS, Data Pool, and Data Push API - Creating technical queries and representations for process visualization based on the available platform features (Celonis PQL, Studio) - Using system functions for visualization and analysis of existing business processes (via the Celonis Process Explorer) - Providing functional advice on technical interfaces, data provisioning, and system requirements

Typical tasks: - Analyze existing insurance processes and identify digitization potential - Gather and document business requirements together with the business departments - Create solution concepts for digital transformation (including process modeling and cost-benefit analyses) - Act as a liaison between business and IT: translate requirements into technical designs and support implementation - Support project management in planning and rolling out new digital solutions (agile methods like Scrum/Kanban) Relevant tools & technologies: BPMN modeling tools (e.g. Visio, Signavio), requirements management (Jira, Confluence), knowledge of common insurance IT systems, MS Office KPIs & metrics: meeting project milestones and budgets, reducing process cycle times, improving customer satisfaction/user acceptance, cutting manual efforts through automation Challenges: coordinating diverse stakeholders in the insurance environment (business units, IT, regulators), integrating new digital solutions into legacy systems, handling regulatory requirements and data protection, change management and user adoption Deliverables: comprehensive requirements documents and process models, detailed business concepts and user stories for IT implementation, defined implementation roadmap, training materials for updated processes Lessons learned: early involvement of all stakeholders makes it easier to carry out digitization projects; iterative, agile approaches allow flexible adjustments; deep industry knowledge (products, regulations) is crucial to design effective digital solutions

- Carrying out and handling switching processes (supplier change, new setup, move-in/move-out) - Independently handling clarification cases with analysis of rejection reasons and follow-up - Supporting market communication and related areas (e.g., meter reading, billing) at least at 2nd-level support - Ensuring smooth operations within energy industry processes

Project description As part of the implementation and optimization of the **Multi Domain Orchestration and Inventory (MDOI)** tool in the mobile transport domain (B2X), the focus is on planning, setup, commissioning, management, and optimization of several thousand fixed and mobile network devices. The application allows the selection and configuration of suitable devices and technologies for their efficient use to achieve maximum network coverage and customer satisfaction. Efficiently managing these projects and processes while increasing automation requires the use of the MDOI software solution. Description of services without personal reference - **IT Project Management**: Creating software rollout and migration plans for the application's two-month releases of MDOI, based on Blueplanet, considering all relevant dependencies using JIRA and stakeholder management - **Design Management**: Planning and creating all relevant designs, as well as reviewing them in the Multi Domain Orchestration and Inventory (MDOI) tool for the transport networks area, as an implementation description of the requirements using JIRA and Confluence - **Stakeholder Management**: Developing and executing communication measures for software changes based on the created designs, checking whether the requirements are fully covered by the designs, including preparing documentation for management using Microsoft Outlook, Microsoft Teams, and JIRA

As part of developing the reporting and analytics capabilities in Business Continuity Management (BCM), the existing BI landscape is being migrated from Tableau to Microsoft Power BI. The goal is to build a future-proof, scalable data warehouse that provides a consolidated data foundation for company-wide analyses. At the same time, existing reporting functionalities and automations in the HiScout standard software should be analyzed and adjusted to meet new requirements. - **Consulting**: Advising on the architecture and setup of a data warehouse based on Microsoft technologies (SQL Server, Power BI) - **Migration**: Advising on migrating existing reports and dashboards from Tableau to Power BI - **Data Analysis**: Analyzing existing data sources and designing suitable ETL workflows - **Automation**: Connecting and automating data sources - **Requirements Analysis**: Conducting requirements analysis and creating technical concepts for reporting adjustments in HiScout - **Reporting**: Implementing and testing reporting adjustments in HiScout - **Documentation**: Quality assurance and documentation of work performed - **Training**: Advising on creating training materials and transferring know-how to internal teams

A company is looking for an experienced expert with in-depth knowledge of License Manager, Inventory Server, and Integration Manager. The goal of the project is to optimize existing systems, integrate them, and ensure all processes run smoothly and efficiently. In this role, the expert will work closely with internal teams to analyze requirements, implement solutions, and monitor the systems. Key responsibilities: - Analyzing and optimizing existing systems (License Manager, Inventory Server, Integration Manager) - Integrating new processes and tools - Collaborating with internal teams on requirements analysis - Ensuring system efficiency and security - Documenting and training the teams

We are looking for an experienced IT project manager to oversee and execute IT projects in the hospital environment. The goal is to implement various digitalization and infrastructure projects (e.g. KIS migration, medical technology integration, ISMS implementation, or TI components) on time, within budget, and with assured quality. In this role, the project manager takes full responsibility for planning, controlling, and delivering the projects and acts as the interface between IT, business units, and management. - Overall responsibility for planning, control, and execution of IT projects in a clinical setting - Coordination of internal and external stakeholders, including the IT department, medical staff, service providers, and manufacturers - Ensuring compliance with time, budget, and quality requirements - Preparing project plans, status reports, decision papers, and presentations - Risk management, resource planning, and escalation management - Managing acceptance and testing procedures, including documentation - Supporting preparation for KHZG or NIS2 relevant measures - Acting as an interface between IT, business units, and management

A company is looking for a specialist site manager in electrical engineering as well as a specialist site manager for control systems (Siemens T3000) for a demanding project. The goal of the project is the technical supervision and control of the control system interfaces of the existing plant during the integration of the new plant, as well as ensuring quality and contract compliance during the construction and commissioning phase. The role requires intensive coordination and monitoring of interfaces with construction planning due to the size of the project. The site manager will work closely with control system specialists, planners, experts, and contractors to ensure the successful implementation of the project. Main responsibilities: - Technical supervision of the control system interfaces of the existing plant during the integration of the new plant - Technical management of control system specialists, planners, experts, and contractors - Creation of discipline-specific and project phase–dependent documents - Participation in project meetings and negotiations - Technical management of quality assurance and quality control during the construction and commissioning phase - Advising on control system commissioning - Technical coordination with planning engineers on quality monitoring tasks - Monitoring contract compliance and conducting quality inspections - Participation in safety meetings and implementation of measures to address identified deficiencies

Management of a strategic digitalization project in a hospital network, e.g. the implementation of a new hospital information system (HIS) or an electronic patient record (ePA) according to KHZG. - **Typical tasks:** - Overall responsibility for project planning, control, and monitoring (time, budget, quality). - Management of the interdisciplinary project team. - Requirements, risk, and stakeholder management. - Planning and management of change management and rollouts. - Ensuring compliance with regulatory requirements (KHZG, GDPR). - **Relevant technologies, tools & methods:** - HIS systems (Orbis, iMedOne), ePA solutions. - Standards: HL7, FHIR. - Methods: PRINCE2, PMI/PMBOK, agile/hybrid. - Tools: MS Project, Jira, Confluence. - **Typical KPIs & success metrics:** - KHZG compliance, user adoption rate (>85%), process efficiency, milestone adherence. - **Key challenges & risks:** - High process complexity, intensive stakeholder management, interoperability, data security. - **Deliverables:** - Project plan, status reports, requirements specification, change concept, cutover plan, project closure report.

A company is looking for an experienced construction supervisor or manager in the fiber optic field to provide technical support and oversee the construction work of a general contractor in FTTH broadband expansion. The goal is to ensure that the construction work meets the specifications of the execution planning and that the FTTH broadband network is fully developed. The construction sites are located near Würzburg and Saarbrücken. The role includes monitoring adherence to schedules, safety regulations, and construction quality, as well as coordinating and documenting construction activities. The construction manager will independently create a site diary and complete documentation, track subcontracted work, and verify the accuracy of planning and construction documents. - Technical support and supervision of the construction work of a general contractor in FTTH broadband expansion. - Ensuring compliance with schedules, safety regulations, and construction quality. - Recording and reviewing planning and construction documents of subcontractors. - Independently creating a site diary and complete documentation. - Tracking, controlling, and documenting ordered services and deliveries. - Site supervision and safety inspections of the construction site according to the HSE concept.

- Development and enhancement of data management in SQL Server for fixed network and all-IP products, and integration of existing and new data sources from SQL Server/Oracle from CRM systems and workflow management systems - Building a database in SQL that collects and consolidates data from different source systems (CRM and workflow systems) - Creating and extending database analyses in Tableau for daily reporting - Advising business units (e.g., Technology, Order Management) on data collection and customer data management - Continuous optimization and establishment of the data management process and data quality for future projects

A company is looking for freelance support in HSE management / safety specialist for a long-term project. The goal of the project is to ensure and coordinate all safety measures on a construction site in Wiesbaden in accordance with legal and contractual requirements. The role includes the responsibility for implementing and monitoring occupational safety measures, conducting trainings and audits, as well as creating and maintaining HSE reporting. The HSE Manager will work closely with clients, consortium members and contractors to ensure compliance with safety standards. Key responsibilities: - Coordinate safety measures on the construction site in accordance with Section 4 of the Occupational Health and Safety Act - Align and coordinate safety measures with contractors - Maintain and update the HSE site manual - Conduct toolbox talks - Attend coordination meetings - Prepare and carry out trade-specific risk assessments - Perform regular site inspections including reporting and photo documentation - Report and track deficiencies and derive appropriate actions - Conduct HSE training and instruction sessions - Monitor the use of personal protective equipment - Organize and carry out HSE audits - Create and maintain HSE reports - Review relevant supplier documents - Analyze work and near-miss incidents including preventive measures - Issue directives to contractors on HSE-related matters

A company is looking for an experienced iOS App Tester who knows XCUI tests and REST APIs. The goal of the project is to ensure the quality and functionality of an iOS app that is still in development. The tester will work closely with the development team to create and run automated tests and to check API integration. - Create and run XCUI tests for the iOS app - Review and validate REST API integrations - Collaborate with developers to identify and fix bugs - Document test results and prepare reports