An EPC consultant is seeking an experienced Construction Manager (Mechanical) for the execution of a biogas plant. The goal of the project is the construction supervision and ensuring mechanical works are carried out in accordance with project requirements. In this role, you take responsibility for construction supervision and coordinate the mechanical works on site. You work closely with other project stakeholders to ensure compliance with schedules, quality standards and safety regulations. - Supervision of mechanical construction works at the biogas plant - Ensuring adherence to schedules and quality standards - Coordination of subcontractors and suppliers - Conducting regular site inspections and reporting - Assisting in resolving technical challenges on site - Compliance with safety regulations and environmental standards

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact for electrical commissioning issues on-site, navigating complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary, ensuring clear communication with stakeholders. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: - If blame is justified → propose and implement a solution. - If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

For a project in the power plant environment, a freelance specialist for the migration and adaptation of the ABB 800xA control system is urgently sought. - Typical tasks in this role:** - Implementation of programming and commissioning with the ABB 800xA process control system. - Migration of existing control system logic to the new system version, including adaptation of controllers and I/O modules. - Creation and adaptation of process displays, operator interfaces, and alarm management configurations. - Execution of system tests, error analysis, and performance optimizations to ensure plant availability and controllability. - Technical support for operations personnel during the commissioning and ramp-up phase. - Preparation and maintenance of technical documentation (functional diagrams, configuration descriptions, test protocols). - Close collaboration with the process engineering, electrical engineering departments, and the plant operator. - Relevant technologies, tools or methods:** - Control system: ABB Ability™ System 800xA (including AC 800M controller, Information Management, Batch Control). - Engineering tools: Control Builder M, Process Graphics Migration Tool, Bulk Data Manager. - Fieldbus systems: PROFIBUS, Foundation Fieldbus, Modbus. - Virtualization: VMware, Hyper-V for test and development environments. - Databases: SQL knowledge for analysis of historical data (e.g. 800xA History). - Knowledge of relevant standards for process and power plant technology (e.g. IEC 61508, IEC 61511). - Typical KPIs or success metrics:** - Migration speed: number of migrated system components/functions per week/month. - System availability: control system uptime after migration > 99.9%. - Commissioning error rate: number of critical software bugs after go-live < 5. - Test coverage: percentage of successfully executed and documented test cases > 95%. - Adherence to project schedule: completion of migration and commissioning by the defined deadline. - Operator acceptance: positive feedback from operations personnel on the new system environment. - Specific challenges, risks or peculiarities:** - Migration during live operation (“brownfield”) with minimal downtime. - Ensuring compatibility between old and new system components (hardware/software). - High complexity of process logic in power plants (e.g. boiler control, turbine regulation). - Risk of cybersecurity vulnerabilities in networked control systems (e.g. CVEs for 800xA). - Management of interfaces to third-party systems (e.g. MES, ERP). - Need for intensive and precise collaboration between control engineering, process engineering, and operations. - Concrete deliverables:** - Migrated and operational control logic on the target system. - Fully tested and customer-approved process displays and operator interfaces. - Acceptance protocols for Factory Acceptance Test (FAT) and Site Acceptance Test (SAT). - Updated technical plant documentation. - Final migration report with lessons learned. - Trained operations personnel.

A company is looking for an experienced Technical Project Manager in the field of district heating. The project objective is the planning and construction of district heating pipelines across all service phases of HOAI, as well as taking on complex project tasks. The Project Manager will play a key role in managing and coordinating projects, working closely with engineering firms, municipalities, authorities, and internal stakeholders. The role includes developing and optimizing planning options to maximize the efficiency and sustainability of projects. In addition, the Project Manager will continuously improve technical planning guidelines and processes, conduct technical-economic analyses, develop scenarios, and create concepts. Another focus is on budget planning for network investments in the heating sector, in close coordination with central controlling, as well as performing network calculations. - Planning and construction of district heating pipelines across all service phases of HOAI. - Management and coordination of projects in collaboration with engineering firms, municipalities, authorities, and internal stakeholders. - Development and optimization of planning options to increase efficiency and sustainability. - Support in improving technical planning guidelines and processes. - Conducting technical-economic analyses as well as developing scenarios and concepts. - Preparing budget planning for network investments in the heating sector. - Performing network calculations.

A company is looking for an experienced construction manager who specializes in pipe works. The goal of the project is to manage and supervise construction activities, particularly in the area of pipes with a diameter of DN2000. The construction manager will be responsible for planning, coordinating and carrying out pipe segment cutting operations. The position is entirely on-site in Düsseldorf. - Managing and supervising construction projects in the field of pipe works - Planning and execution of pipe segment cutting operations - Ensuring compliance with safety and quality standards - Coordination of teams and resources - Documentation and reporting on project progress

- Construction management for the installation of electrical systems in the context of a grid connection project - Ensuring compliance with budget, schedule and quality objectives as well as all relevant legal regulations - Reviewing technical documents such as construction plans, material lists and performance records - Coordination and communication with subcontractors, suppliers and project stakeholders - Interface management and ensuring a smooth project process

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact on-site for electrical commissioning issues, reviewing complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary. Clear communication with stakeholders and independent client-side representation are key aspects of this role. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: If blame is justified → propose and implement a solution. If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

A company is looking for an experienced project manager with a civil engineering background for the power plant or energy industry. The aim of the project is to lead the planning, coordination and implementation of construction projects in the energy and power plant sector. The role requires close collaboration with interdisciplinary teams to ensure that projects are completed on time and within budget. It is explicitly stated that construction supervisors are not being sought. Main responsibilities: - Management and oversight of construction projects in the power plant or energy industry - Coordination between various disciplines and external partners - Ensuring compliance with safety and quality standards - Development and monitoring of project schedules and budgets - Identification and resolution of technical challenges - Reporting to stakeholders and management

A company is looking for a specialist site manager for electrical engineering as well as a specialist site manager for control engineering (Siemens T3000) for a demanding project. The aim of the project is the technical monitoring and control of the control system interfaces of the existing plant during the integration of the new plant, as well as ensuring quality and contract compliance during the construction and commissioning phase. The role requires intensive coordination and monitoring of interfaces with construction planning due to the size of the project. The site manager will work closely with control engineers, planners, experts and contractors to ensure the successful implementation of the project. Key responsibilities: - Technical monitoring of the control system interfaces of the existing plant during the integration of the new plant - Technical management of control engineers, planners, experts and contractors - Preparation of technical and project phase–dependent documentation - Participation in project meetings and negotiations - Technical management of quality assurance and quality control during the construction and commissioning phase - Consulting on control system commissioning - Technical coordination with design engineers on quality monitoring tasks - Monitoring contract compliance and conducting quality inspections - Participation in safety meetings and implementation of measures to address identified deficiencies

For an internationally active manufacturer of special machinery, an experienced PLC programmer is sought to implement demanding automation projects. The focus is on new programming and commissioning of control systems. - Typical areas of responsibility: Development, testing and documentation of PLC software for new systems using Siemens SIMATIC S7 (TIA Portal) and/or CODESYS V3. Creation and adaptation of HMI visualizations (e.g., with WinCC Unified, TwinCAT HMI). Commissioning of machines and systems at the customer site (including I/O checks, configuration of fieldbus systems such as Profinet/EtherCAT, functional tests). Systematic troubleshooting and optimization of existing systems. Technical support for customer service. - Relevant technologies/tools: Siemens TIA Portal, SIMATIC S7-1500, CODESYS V3, Beckhoff TwinCAT, WinCC, various fieldbus configurators, EPLAN P8 (reading circuit diagrams). - KPIs/success metrics: Adherence to development and commissioning schedules, reduction of commissioning time through high software quality, machine cycle time and availability (OEE), customer satisfaction after commissioning. - Special challenges: Integration of hardware and software components from various manufacturers. Working under time pressure during on-site commissioning. Ensuring functional machine safety (Safety PLC) according to standards (e.g., ISO 13849-1). - Deliverables: Operational, fully documented PLC programs, final HMI projects, signed commissioning and acceptance protocols, creation or supplementing of operating manuals. - Best practices: Structured programming according to standards (e.g., IEC 61131-3), modular and reusable software blocks, consistent version control of code (e.g., in Git).

A company is seeking support for carrying out the engineering for power generation and consumption facilities and their connection to the transmission and/or distribution grids of grid operators in Germany and abroad. The project includes both existing facilities and power plants, energy consumption and hybrid facilities under development, such as battery systems. The goal is to plan, coordinate and implement grid connections efficiently. Main tasks: - Managing approval processes for grid connections at the respective grid voltage level - Preparation of technical documents for grid connection requests - Creation of grid connection applications including technical documentation for grid operators - Technical engineering for grid connection concepts - Planning of high-voltage, medium-voltage switchgear and substations - Basic and detailed engineering including tender documents and specifications - Development of technical standards to implement quality requirements - Control and coordination tasks within project execution - Consulting and coordination of quality assurance measures - Project management considering technical regulations and project management strategies - Advice on contract management, e.g. grid connection agreements - Coordination of processes and execution of on-site construction supervision measures - Development of retrofit concepts for conventional power plants, hydropower plants and other facilities

A company is looking for an experienced Electrical Technician to join a 12-month project in Berlin. The main focus of the project is the supervision of cable pulling processes. The role requires strong expertise in cables and related technologies. - Supervision and monitoring of cable pulling processes - Ensuring compliance with technical standards and safety regulations - Collaboration with other team members to ensure project success - Reporting and documentation of progress and issues

## Service Description without Personal Reference - **IT Project Management**: Creation of software rollout and migration plans for the bi-monthly releases of the MDOI application based on Blueplanet, taking into account all relevant dependencies using JIRA and stakeholder management - **Design Management**: Planning and creation of all relevant designs as well as their review in the Multi Domain Orchestration and Inventory (MDOI) tool for the Transport Networks sub-area, serving as implementation documentation of requirements using JIRA and Confluence - **Stakeholder Management**: Development and execution of communication measures regarding software changes based on the created designs, verification that the requirements are fully covered by the designs, including the preparation of documentation for management using Microsoft Outlook, Microsoft Teams, and JIRA

An organization is seeking an experienced construction supervisor or site manager in the fiber optics environment to professionally accompany and oversee the construction services of a general contractor in FTTH broadband deployment. The goal is to ensure that the construction services comply with the requirements of the execution planning and that the FTTH broadband network is fully rolled out. The construction sites are located near Würzburg and Saarbrücken. The role includes monitoring compliance with schedules, occupational safety requirements, and quality of construction services, as well as coordinating and documenting construction activities. The site manager will independently create a construction diary and a complete documentation, track subcontracted services, and verify the accuracy of planning and construction documents. - Professional accompaniment and oversight of a general contractor's construction services in FTTH broadband expansion. - Ensuring adherence to schedules, occupational safety requirements, and the quality of construction services. - Recording and reviewing the planning and construction documents of third-party companies. - Independently creating a construction diary and complete documentation. - Tracking deadlines, controlling, and documenting ordered services and deliveries. - Construction supervision and safety control of the construction site according to the HSE concept.

A company is looking for a Siemens PLC Programmer to support a hybrid setup in Siegen. The project focuses on programming and optimizing Siemens PLC systems, particularly within the steel industry. The role requires expertise in S120 and G120 servo drives. The ideal candidate should live close to Siegen to facilitate on-site work when required. Key responsibilities: - Programming and optimizing Siemens PLC systems. - Working with S120 and G120 servo drives. - Collaborating with the team to ensure smooth operations in a hybrid setup. - Troubleshooting and resolving technical issues. - Ensuring compliance with industry standards and safety regulations.

For a public client project, a civil engineer (m/f/d) is sought to represent the client. The project includes the development and rehabilitation of roads, sidewalks, street lighting, and bus stops. - Typical responsibilities in this role:** - Taking over the non-delegable client duties according to the AHO series, including defining objectives, budget responsibility, and making fundamental decisions. - Steering and coordinating external engineering firms, expert assessors, and contracting construction companies. - Ensuring compliance with procurement law (VOB/VgV), building law, and relevant technical standards (e.g., DIN, ZTV). - Carrying out cost and schedule control as well as risk management across all project phases (according to HOAI). - Quality assurance on site, organizing construction meetings, and conducting inspections. - Reviewing claims for additional compensation and invoices. - Regular reporting to the department management and political committees; ensuring transparency and traceable documentation. - Relevant technologies, tools, or methods:** - CAD/BIM software: Autodesk Civil 3D, Revit, AutoCAD. - Tendering, contracting, invoicing (AVA): RIB iTWO, ORCA AVA. - Project management & control: MS Project, Projektron BCS, Asana. - Construction management & documentation: PlanRadar, Capmo. - In-depth knowledge of VOB/B, VOB/C, and HOAI. - Typical KPIs or success metrics:** - Budget compliance: deviation from the approved budget < 10%. - Schedule adherence: meeting milestones (design completion, construction start, completion) with < 5% delay. - Quality: low defect rate at acceptance (< 5% of trades with significant defects). - Citizen satisfaction: minimal number of justified citizen complaints during the construction phase. - Legal security: number of successfully defended additional claims or legal disputes. - Special challenges, risks, or specifics:** - Dealing with unforeseen ground conditions and contaminated sites. - Complex and lengthy approval processes involving various public interest bodies. - Strict budget constraints and political pressure in case of cost overruns. - Managing residents' interests and public communication. - Challenges due to skilled labor shortages and supply chain bottlenecks in the construction industry. - Concrete deliverables:** - Completed and approved design and execution planning. - Successfully conducted tendering procedure with signed construction contracts. - Documented construction inspections according to VOB. - Final project documentation and audited final invoices. - Final report for senior management and political committees.

A company is seeking an experienced subsea cable tester with an electrical engineering or physics background. The project’s goal is to advise and support the cable tendering process, cable qualification, and the definition and execution of tests during the project phase. The role involves collaborating with bidders, defining requirements, and advising on test procedures to ensure the cables’ quality and functionality. - Advising on cable tendering and cable qualification for the project phase - Defining requirements for manufacturing, interim storage, installation, completion, and inspection - Conducting contract negotiations with bidders - Defining test requirements for all tests from type tests to Site Acceptance Tests (SAT) - Advising on and defining test procedures: from production through FAT tests to type tests and Site Acceptance Tests - Customizing test systems and methods specifically for the project

- Ensuring that access roads are constructed and prepared according to NKT specifications - Supervising the proper construction of: - payout areas - thrust pits - other relevant structures - Checking transport on the last mile to the payout area - Monitoring the cable pull at the payout area and in the thrust pit - Collaborating with the civil engineering supervisor on: - backfilling thrust pits - dismantling access roads and payout areas - ensuring that joint pits are executed in compliance with NKT specifications - Monitoring the correct joining of the joints - Overseeing the blowing in and splicing of fiber optic cables (FOC) - Coordinating with the civil engineering supervisor on the backfilling of joint pits

A company is looking for an experienced MES consultant focusing on Hydra X from MPDV to support the expansion of the system to additional sites. The system is already rolled out at one site and is now to be further scaled. The role includes supporting the introduction of new functions or versions of the system, implementing system adjustments and optimizations based on production requirements, as well as accompanying the rollout. The consultant will work closely with internal teams and external service providers to ensure the rapid identification and resolution of issues in the MES system. - Support in the introduction of new functions or versions of the system - Implementation of system adjustments and optimizations based on production requirements - Assistance with the rollout to additional sites - Rapid identification and resolution of problems in the MES system

A company in the decentralized ventilation systems sector is looking for an experienced Odoo CRM expert to implement and customize Odoo CRM and the Sales module. The goal is to map sales processes efficiently and train an internal team member so that she can independently work with the system in the future. - Setup and customization of Odoo CRM and Sales module - Development of efficient workflows (Lead → Quotation → Order) - User roles and permissions management - Configuration of custom fields, filters, and dashboards - Assistance with data import - Training of the internal project team member