A company is looking for an experienced One Identity expert to support a project in the area of identity and access management. The goal of the project is to optimize the existing One Identity solution and ensure it meets the company's current and future requirements. In this role, the expert will work closely with the internal IT team to solve technical challenges, implement best practices, and ensure the security of the identity management systems. Main tasks: - Analysis and optimization of the existing One Identity solution - Implementation of best practices in identity and access management - Support with the integration of new systems and technologies - Training and support of the internal team - Ensuring compliance with security standards and regulations

For a project in the power plant sector we urgently need a freelance specialist for migrating and adapting the ABB 800xA control system. - Typical tasks in this role:** - Implement programming and commissioning using the ABB 800xA process control system. - Migrate existing control logic to the new system version, including adapting controllers and I/O modules. - Create and adjust process graphics, operator interfaces and alarm management configurations. - Perform system tests, troubleshoot and optimize performance to ensure plant availability and control capability. - Provide technical support to operations staff during the commissioning and ramp-up phase. - Prepare and maintain technical documentation (functional diagrams, configuration descriptions, test reports). - Work closely with process engineering, electrical engineering and the plant operator. - Relevant technologies, tools or methods:** - Control system: ABB Ability™ System 800xA (including AC 800M controller, Information Management, Batch Control). - Engineering tools: Control Builder M, Process Graphics Migration Tool, Bulk Data Manager. - Fieldbuses: PROFIBUS, Foundation Fieldbus, Modbus. - Virtualization: VMware, Hyper-V for test and development environments. - Databases: SQL skills for analyzing historical data (e.g. 800xA History). - Knowledge of relevant standards for process and power plant technology (e.g. IEC 61508, IEC 61511). - Typical KPIs or success metrics:** - Migration speed: number of system components/functions migrated per week/month. - System availability: control system uptime after migration > 99.9%. - Error rate at commissioning: number of critical software bugs after go-live < 5. - Test coverage: percentage of successfully executed and documented test cases > 95%. - Adherence to project schedule: completion of migration and commissioning by the defined deadline. - Operator acceptance: positive feedback from operations staff on the new system environment. - Key challenges, risks or specifics:** - Migration in a live environment (“brownfield”) with minimal downtime. - Ensuring compatibility between old and new system components (hardware/software). - High complexity of process logic in power plants (e.g. boiler control, turbine regulation). - Risk of cybersecurity vulnerabilities in networked control systems (e.g. CVEs for 800xA). - Managing interfaces to third-party systems (e.g. MES, ERP). - Need for close and precise collaboration between control system engineering, process engineering and operations. - Concrete deliverables:** - Migrated and fully operational control logic on the target system. - Fully tested and customer-approved process graphics and operator interfaces. - Acceptance reports for Factory Acceptance Test (FAT) and Site Acceptance Test (SAT). - Updated technical plant documentation. - Final migration report with lessons learned. - Trained operations staff.

- Establishment of a future O2C standard process in S/4 HANA for a retail customer, focusing on O2C integration and planned handling of the ERP system - Existing ERP system for merchandise remains in use for all logistics processes and is out of scope - Requirements definition for interfaces - Process definition and harmonization: establishment of company-wide standard processes in S/4 and in the O2C process integration for the affected areas/entities (B2C, B2B, B2G) - O2C integration: definition of the level of integration of third-party systems: - Best possible compliance with legal reporting and proof obligations - S/4 as the leading system for executing intercompany transactions - Invoice flow and billing - Pricing conditions - Rebates - Contracts What should be done for these topics during the Explore phase? - Preparation and execution of the Fit-to-Standard workshops (including setting up a prototype in the sandbox system for the workshops) - Documentation of the Fit-to-Standard workshop results as part of a BPML up to level 5 - Documentation of gaps / requirements - Process design / documentation of the functional concepts (Confluence + Signavio)

A private equity firm is looking for an authorized signatory based in the UAE to support the team for a period of six months. The role requires close collaboration with the board of directors. Key responsibilities: - Taking on signatory authority for the company. - Working closely with the board of directors and external stakeholders, including lawyers and advisors. - No specialized subject-matter expertise required. - Project scope and billing tbd.

A company is seeking freelance support in HSE management / as a safety specialist for a long-term project. The goal of the project is to ensure and coordinate the safety measures on a construction site in Wiesbaden in accordance with legal and contractual requirements. The role includes responsibility for implementing and monitoring occupational safety measures, conducting trainings and audits, as well as creating and maintaining HSE reporting. The HSE manager will work closely with clients, consortium partners, and contractors to ensure compliance with safety standards. Key responsibilities: - Coordinate the safety measures on the construction site in accordance with §4 of the German Occupational Safety Act - Coordinate and align occupational safety measures with contractors - Maintain and update the HSE site manual - Conduct toolbox talks - Participate in coordination meetings - Develop and carry out trade-specific risk assessments - Regular site inspections including reporting and photo documentation - Report and track defects and derive appropriate corrective actions - Conduct HSE trainings and briefings - Monitor the use of personal protective equipment - Organize and carry out HSE audits - Prepare and maintain HSE reporting - Review relevant supplier documentation - Analyse work and near-miss incidents, including preventive measures - Authority to issue HSE-related instructions to contractors

A company is looking for a specialist construction manager for electrical engineering as well as a specialist construction manager for control technology (Siemens T3000) for a demanding project. The goal of the project is the technical supervision and management of the control technology interfaces of the existing plant during integration of the new system, as well as ensuring quality and contract compliance during the construction and commissioning phases. The role requires intensive coordination and monitoring of the interfaces to the construction planning due to the size of the project. The construction manager will work closely with control engineers, planners, experts and contractors to ensure successful project delivery. Main tasks: Technical supervision of the control technology interfaces of the existing plant during integration of the new system Technical management of control engineers, planners, experts and contractors - Preparation of technical and project-phase dependent documents - Participation in project meetings and negotiations - Technical management of quality assurance and quality control during the construction and commissioning phases - Advising on control technology commissioning - Technical coordination with design engineers on quality monitoring tasks - Monitoring contract compliance and conducting quality inspections - Participation in safety meetings and implementation of measures to rectify identified issues

A company is looking for experienced auditors with expertise in the ISO 9001, ISO 14001, ISO/IEC 17021 and ISO 19011 standards. The goal of the project is to carry out audits and ensure compliance with these standards. The role includes planning, conducting and documenting audits as well as advising on improvement measures. Main tasks: - Conduct audits according to ISO 9001, ISO 14001, ISO/IEC 17021 and ISO 19011 standards - Prepare audit reports and documentation - Advise on compliance and improvement measures - Collaborate with internal and external stakeholders - Ensure compliance with legal and normative requirements

An Automotive company is looking for a Component Responsible (m/f/d) in the wiring harness area. The project goal is the development and series support of wiring harnesses as well as implementing changes in this area. The role includes responsibility for parts in wiring harness development and close collaboration with interdisciplinary teams to achieve project goals. Main tasks: - Component responsibility in wiring harness development - Series support and quality assurance - Implementing changes in wiring harness - Collaborating with internal and external stakeholders

The NetOptimizer (U-1799) is an in-house development tool for analyzing, optimizing, and simulating the transport network with over 500+ users. The goal of this project is to develop new features and extend existing ones. The NetOptimizer should be future-proof and further developed according to the latest standards. The successor project to NetEdison will start as soon as the current RFQ is completed. The project is planned until the end of 2027. The following features are on the roadmap until 2027, among others: - Introduction of user management for all users - Real-time topology updates - Extension of the analysis module (visualization and routing analyses of E2E services, daily reporting for the entire network, alarm integration, enhancement of anomaly detection, etc.) - Extension of the simulation module (expansion for access, E2E services, documentation and output of simulations, simulation and latency, SecGW changes, CORE network simulation, simulation with planned data, special events simulation, subnet simulation, propagation in connected topologies, editing edges and nodes, simulation comparisons, inclusion of forecast traffic data in the simulation module, etc.) - Extension of NetMonkey - Extension of the annealer/optimization module - Automation (APIs, interactive interface, automated tasks), workflow engine for the NetOptimizer, network analysis and simulation, automated network configuration - Predictive network analysis - Extension of NetAgent/AI - Detailed service description without personal references: - Project management: Consulting on strategic planning, controlling, and execution of technology-driven projects in compliance with Telefónica’s internal project management guidelines using MS Project, MS Teams, M365, and Confluence for project structuring, scheduling, progress tracking, and transparent documentation - Target systems: Defining and implementing cross-departmental target systems (OKRs, KPIs, scorecards), including coordination with management using Microsoft Excel, Power BI, and Microsoft Planner for data collection, visualization, and tracking of goal achievement - Management communication: Preparing and delivering management presentations and committee decisions using Microsoft PowerPoint and Word, including status reports on milestones, risks, budget, and quality on Telefónica’s project documentation platforms (e.g., Jira), with a clear focus on strategic impact and decision relevance - Stakeholder management: Advising on stakeholder and communication management throughout the project lifecycle via Outlook, MS Teams, and Confluence, coordinating with internal and external stakeholders, and strategic communication in English and German - Risk management: Supporting risk management and monitoring critical paths, including advice on introducing escalation logic, early warning indicators, and action tracking, using Microsoft Planner and Excel for measures control - Process optimization: Advising on the development and standardization of project management processes in technology networks, including reviewing existing PMO approaches and tools, using Confluence and SharePoint for knowledge retention and documentation

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact on-site for electrical commissioning issues, reviewing complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary. Clear communication with stakeholders and independent client-side representation are key aspects of this role. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: If blame is justified → propose and implement a solution. If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact for electrical commissioning issues on-site, navigating complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary, ensuring clear communication with stakeholders. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: - If blame is justified → propose and implement a solution. - If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

A company is looking for an experienced SuccessFactors Consultant HCM to support a project. The project aims to maintain and further develop existing SAP HCM and SuccessFactors modules and ensure smooth interface management between the systems. The role includes consulting and support for ongoing operations as well as optimizing the existing modules. Main tasks: - Maintenance and further development of the existing SAP HCM module ECP (Payroll) as well as the existing SAP SuccessFactors modules EC (Employee Central) and ECT (Time) - Interface management between SAP ECP (Payroll) and EC (Employee Central) - Support for ongoing operations

A company is looking for an experienced software developer to build safety-critical systems for the defense sector. The goal is to design and deliver robust software solutions from concept through delivery. The focus is on applying modern technologies such as Java (Jakarta EE, Eclipse RCP, JavaFX, OSGi, JFoenix, EMF) and/or C++ (C++14/17) to develop high-performance applications for Windows and Linux (AlmaLinux/RHEL), including specialized hardware and embedded systems. The role includes the development and integration of various interfaces, such as for cryptography, mapping, or specialized hardware components. The candidate will work in agile processes and collaborate closely with colleagues, project teams, and customers. Quality assurance through automated tests and emulators in a CI/CD pipeline is a central part of the work. The projects are diverse and offer responsibilities in architecture, system integration, test automation, as well as specialized areas like GPU-based signal processing. Communication with internal and external stakeholders and close cooperation with project teams and customers are also part of the role. - Responsibility for the entire development cycle (requirements analysis, architecture & design, implementation, testing & validation) - Development of (hardware-near) applications

A company is looking for an experienced project manager for the approval planning of infrastructure projects. - Management and coordination of the approval planning - Technical support and coordination of all involved service providers (routing, land management, environmental, communications) - Coordination of interfaces between departments and alignment with relevant stakeholders - Preparation of regular project reports and continuous updating of project documentation - Review and approval of deliverables from contracted service providers - Ensuring compliance with legal and technical requirements - Advising on the selection and hiring of specialist planners and experts - Independently creating scope of work documents and evaluating offers

For a company in the Friedrichshafen area, we are looking for an experienced Azure Solution Architect (m/f/d) to support a cloud transformation project. The role includes architecting and implementing modern cloud-based platforms on Azure, including technical design, stakeholder communication and operational management. Tasks: - Analysis of existing system landscapes and design of Azure cloud target architectures - Designing and implementing scalable, secure cloud solutions in an enterprise environment - Managing the migration of legacy systems to the Azure cloud - Collaborating with DevOps, infrastructure and security teams - Supporting architecture governance and documentation - Coaching architecture teams and acting as a technical sparring partner for management

A company is looking for an experienced project planner to create, update and adjust work breakdown structures and integrate schedule requirements from tenders and contracts. The goal is to track construction progress, assess risks and ensure schedule compliance. The project planner will work closely with project management and other stakeholders to ensure smooth project execution. Main tasks: - Create, update and adjust the work breakdown structure and the overall project schedule. - Integrate timing requirements from tenders and contracts. - Track construction progress as well as changes and deliverables. - Conduct earned value analyses (S-curve) and define the "Value of Work Done". - Prepare progress reports and schedule analyses. - Incorporate resource planning into the schedule. - Assess scheduling risks and advise on risk management. - Perform schedule risk analyses (SRA). - Coordinate interface milestones with project stakeholders. - Provide deliverables to meet scheduling requirements. - Prepare and review schedule-related content in tender documents and contract drafts. - Evaluate and integrate schedules during the bidding phase. - Collect and integrate regular schedule updates from contractors and suppliers. - Monitor contract compliance based on construction progress and deadlines. - Ensure schedule quality according to DCMA criteria. - Perform forensic analysis of construction delays under SCL Delay & Disruption Protocols.

A company is seeking support for carrying out the engineering of energy generation and consumption plants and their connection to the transmission and/or distribution grids of network operators in Germany and abroad. The project includes both existing plants and those under development, such as power plants, consumer installations, and hybrid systems like battery installations. The goal is to plan, coordinate, and implement grid connections efficiently. Main tasks: - Managing approval processes for grid connections at the respective voltage level - Preparing technical documents for grid connection requests - Creating grid connection applications, including technical documentation for network operators - Technical engineering for grid connection concepts - Designing extra-high, high, and medium-voltage switchgear and substations - Basic and detailed engineering, including tender documents and specifications - Developing technical standards to implement quality requirements - Control and coordination tasks within project execution - Consulting and coordination for quality assurance measures - Project management in line with technical regulations and project management strategies - Advice on contract management, e.g., grid connection contracts - Coordinating processes and carrying out on-site construction support measures - Developing retrofit concepts for conventional power plants, hydropower plants, and other installations

To support projects in the energy infrastructure sector, we are looking for a freelance electrical engineer with a focus on high and extra-high voltage as a primary planner (m/f/d). The projects include grid connections for generation plants (especially wind and solar farms) as well as the construction and conversion of substations. - Typical tasks in this role:** - Developing primary technical concepts and layouts for air- and gas-insulated high and extra-high voltage switchgear (AIS/GIS) from 110 kV to 380 kV. - Sizing and dimensioning primary equipment (circuit breakers, disconnectors, instrument transformers, transformers, etc.). - Creating single-line diagrams, one-line overview diagrams, and arrangement plans. - Performing short-circuit and load flow calculations as well as sizing grounding systems and lightning protection. - Technical clarification and coordination with clients, grid operators, authorities, and suppliers. - Preparing technical specifications and tender documents for primary equipment. - Coordinating with other disciplines such as secondary systems, civil engineering, and control systems. - Supporting commissioning and acceptance testing of the installations. - Relevant technologies, tools or methods:** - Planning software: AutoCAD, Primtech, REVIT, EPLAN. - Calculation tools: PowerFactory (DIgSILENT), NEPLAN, or manufacturer-specific tools. - Standards & regulations: VDE-AR-N 4120 (High Voltage Grid Connection Rules), IEC standards, EN standards. - Project management tools: MS Project, Jira. - BIM (Building Information Modeling) in plant engineering. - Typical KPIs or success metrics:** - Planning quality: Number of change requests after approval < 5%. - On-time delivery: Meeting planning milestones according to the overall project schedule. - Cost efficiency: Adhering to budget targets for primary equipment. - Technical compliance: Successful acceptance by the grid operator without primary technical issues. - Interface management: Smooth coordination measured by the number of delays in other disciplines due to planning errors. - Key challenges, risks or specifics:** - High complexity and safety requirements in the high and extra-high voltage range. - Need for strict compliance with the grid connection rules (TAR) of the respective grid operators. - Long delivery times and price fluctuations for large primary components. - Coordination in tight spaces, especially during retrofits. - Increasing demands from integrating renewable energy (e.g., reactive power control, FRT behavior). - Ensuring physical safety and occupational health in planning.

A medical devices company is looking for a skilled Medical Content Writer to support their marketing efforts. The primary focus of this role is to create compelling and accurate content for email campaigns and landing pages, ensuring the tone and messaging align with the medical field's standards and the company's branding.

Our renowned client from the financial sector is looking to strengthen their development team with an experienced Pega Developer. The project focuses on further developing and optimizing the existing CRM solution based on the Pega IBPMS low-code platform. - Development and configuration of the Pega IBPMS low-code platform in a CRM environment - Implementation of business processes and workflows - Customization and extension of existing CRM functionalities - Collaboration with business stakeholders to implement requirements - Quality assurance and testing of developed solutions