For a large pharmaceutical company, an IMP (Investigational Medicinal Product) Quality Manager is sought to ensure GMP compliance and product quality of investigational medicinal products. - Typical areas of responsibility in this role:** - Review and approval of manufacturing and batch records for Drug Substance and Drug Product. - Execution of the final quality release of investigational products for use in clinical trials. - Review and approval of GMP-relevant documents such as SOPs, validation reports, deviations and change control requests. - Creation and maintenance of product-specific quality agreements with internal and external partners. - Support of production and QC departments on all GMP-related and quality topics. - Planning and execution of internal audits and support during regulatory inspections and external audits. - Management and monitoring of CAPA (Corrective and Preventive Actions) measures for sustainable problem resolution. - Relevant technologies, tools or methods:** - Quality Management Systems (QMS): Veeva Vault QMS, MasterControl, TrackWise, SAP QM. - Document Management Systems (DMS): Veeva Vault, OpenText Documentum. - ERP systems: SAP S/4HANA (especially QM module). - Laboratory Information Management Systems (LIMS). - Manufacturing Execution Systems (MES). - Methods: Risk analysis (FMEA), Root Cause Analysis (5 Whys, Ishikawa), Statistical Process Control (SPC). - Typical KPIs or success metrics:** - Batch Release Time: Average time from production completion to final release (Target: < X days). - Right-First-Time Rate: Percentage of batches released without deviations or rework (Target: > 95%). - CAPA Effectiveness: Reduction in repeat deviation rate after CAPA implementation (Target: > 80%). - Audit Performance: Number of critical/major findings in internal and external audits (Target: 0). - Deviation Closure Rate: Percentage of deviations closed within the set timeframe (Target: > 90%). - Key challenges, risks or specifics:** - High complexity and variability due to development of new molecules and processes in the clinical phase. - Strict compliance with ever-evolving GMP regulations (e.g., EU Annex 1 for sterile products). - Ensuring product quality and patient safety under high time pressure (Time-to-Market). - Managing interfaces between development, manufacturing, QC and regulatory affairs. - Risk of supply chain disruptions for critical raw materials or services. - Ensuring data integrity across all quality-related systems. - Deliverables:** - Released batches of investigational products. - Approved master batch records and SOPs. - Completed and evaluated deviation and change reports. - Audit and inspection reports with tracked action plans. - Valid quality agreements with all relevant partners. - Regular quality reports for management.

A company is looking for an experienced MES consultant specializing in MPDV's Hydra X to support the expansion of the system to additional sites. The system is already deployed at one location and is now to be further scaled. The role includes supporting the introduction of new features or versions of the system, implementing system customizations and optimizations based on production requirements, as well as accompanying the rollout. The consultant will work closely with internal teams and external service providers to ensure rapid identification and resolution of issues in the MES system. - Support in introducing new features or versions of the system - Implementation of system customizations and optimizations based on production requirements - Support in the rollout to additional sites - Rapid identification and resolution of issues in the MES system

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact on-site for electrical commissioning issues, reviewing complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary. Clear communication with stakeholders and independent client-side representation are key aspects of this role. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: If blame is justified → propose and implement a solution. If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

A company is looking for a talented Footwear Designer to work on the design of Mountain Bike Footwear for SS27. The project involves creating innovative and functional designs that align with the brand's identity and meet the needs of mountain biking enthusiasts. The role requires a deep understanding of footwear design, materials, and trends, as well as the ability to translate concepts into market-ready products. The designer will collaborate closely with cross-functional teams to ensure the designs are both aesthetically appealing and technically sound. - Develop creative and functional designs for Mountain Bike Footwear for SS27 late add and FW27 FIVE TEN Footwear. - Conduct research on market trends, materials, and user needs. - Collaborate with cross-functional teams to ensure designs meet technical and aesthetic requirements. - Create detailed sketches, prototypes, and specifications for production. - Ensure designs align with the brand's identity and target audience.

For a project in the power plant environment, a freelance specialist for the migration and adaptation of the ABB 800xA control system is required at short notice.**Typical tasks in this role:**- Implementation of programming and commissioning with the ABB 800xA process control system.- Migration of existing control system logic to the new system version, including adjustment of controllers and I/O modules.- Creation and modification of process graphics, user interfaces, and alarm management configurations.- Execution of system tests, error analyses, and performance optimizations to ensure plant availability and controllability.- Technical support for operational personnel during the commissioning and ramp-up phases.- Preparation and maintenance of technical documentation (functional diagrams, configuration descriptions, test protocols).- Close collaboration with process engineering, electrical engineering, and the plant operator.**Relevant technologies, tools or methods:**- Control system: ABB Ability™ System 800xA (including AC 800M Controller, Information Management, Batch Control).- Engineering tools: Control Builder M, Process Graphics Migration Tool, Bulk Data Manager.- Bus systems: PROFIBUS, Foundation Fieldbus, Modbus.- Virtualization: VMware, Hyper-V for test and development environments.- Databases: SQL knowledge for historical data analysis (e.g. 800xA History).- Knowledge of relevant standards for process and power plant engineering (e.g. IEC 61508, IEC 61511).**Typical KPIs or success metrics:**- Migration speed: Number of migrated system components/functions per week/month.- System availability: Control system uptime after migration > 99.9%.- Commissioning error rate: Number of critical software bugs after go-live < 5.- Test coverage: Percentage of successfully executed and documented test cases > 95%. - Adherence to project schedule: Completion of migration and commissioning by the defined deadline.- Operator acceptance: Positive feedback from operational personnel on the new system environment.**Specific challenges, risks or specifics:**- Migration in live operation (“brownfield”) with minimal downtime.- Ensuring compatibility between old and new system components (hardware/software).- High complexity of process logic in power plants (e.g. boiler management, turbine control).- Risk of cybersecurity vulnerabilities in networked control systems (e.g. CVEs for 800xA).- Management of interfaces to third-party systems (e.g. MES, ERP).- Need for intensive and precise collaboration between control technology, process engineering, and operations.**Concrete deliverables (“Deliverables”):**- Migrated and operational control logic on the target system.- Fully tested and customer-approved process graphics and user interfaces.- Acceptance protocols for Factory Acceptance Test (FAT) and Site Acceptance Test (SAT).- Updated technical plant documentation.- Final migration report with lessons learned.- Trained operational personnel.

An EPC consultant is looking for an experienced site manager (mechanical) to oversee a biogas plant project. The objective of the project is to supervise the construction and ensure that the mechanical works comply with the project requirements. In this role, you will take responsibility for construction supervision and coordinate on-site mechanical works. You will work closely with other project stakeholders to ensure adherence to schedules, quality standards, and safety regulations. - Supervise mechanical construction works on the biogas plant - Ensure compliance with schedules and quality standards - Coordinate subcontractors and suppliers - Conduct regular site inspections and reporting - Assist in resolving technical challenges on-site - Adhere to safety regulations and environmental standards

A company is seeking support for a project aimed at transparently mapping the overall ordering process in the Portals area. The goal is to combine relevant data sources from order to activation to enable a holistic view of the end-to-end process. This should facilitate the identification of process deviations and optimization potentials. Key project milestones include connecting the required data sources, building self-service reports, and implementing automated alerts for deviations in the process flow. The challenge lies in the technical and professional integration of heterogeneous systems and data flows to ensure consistent monitoring and control of the ordering process. - Analysis and documentation of requirements in the Omnichannel area using requirements management tools and structured collection methods - Professional and technical analysis of existing data sources and ETL processes using database tools - Recording and evaluation of existing interfaces between source and target systems based on technical documentation - Consulting on technical integration of defined data sources into the Celonis environment considering the tools used (Celonis EMS, Data Pool and Data Push API) - Creation of technical queries and representations for process visualization based on provided platform functions (Celonis PQL, Studio) - Use of system-side functions for visualization and analysis of existing business processes (via Celonis Process Explorer) - Professional consulting on technical interfaces, data provision and systemic requirements

A company is seeking a specialist Construction Manager for Electrical Engineering as well as a specialist Construction Manager for Control Technology (Siemens T3000) for a challenging project. The project’s objective is the technical supervision and management of the control technology interfaces of the existing plant during the integration of the new system, as well as ensuring quality and contractual compliance throughout the construction and commissioning phases. The role requires intensive coordination and monitoring of interfaces with construction planning due to the size of the project. The Construction Manager will work closely with control engineers, planners, experts and contractors to ensure the successful implementation of the project. Key Responsibilities: Technical supervision of the control technology interfaces of the existing plant during the integration of the new system Technical management of control engineers, planners, experts and contractors - Preparation of technical and project-phase-specific documentation - Participation in project meetings and negotiations - Technical oversight of quality assurance and quality control during the construction and commissioning phases - Advisory support for control technology commissioning - Technical coordination with planning engineers regarding quality monitoring tasks - Monitoring contractual compliance and conducting quality inspections - Participation in safety meetings and implementation of measures to remedy identified deficiencies

Ein Unternehmen sucht einen erfahrenen Technischen Redakteur, der für die Erstellung und Verwaltung von Datenblättern, Produktbroschüren und Katalogen verantwortlich ist. Diese Dokumente sind entscheidend für den Vertrieb, rechtsverbindlich und Teil der internen Qualitätssicherung. Die Produktbroschüren präsentieren die wesentlichen Produktmerkmale und den Kundennutzen, während die Datenblätter detaillierte Spezifikationen enthalten. Die Rolle umfasst die eigenverantwortliche Steuerung und Überwachung sämtlicher Korrektur- und Abstimmprozesse bis zur finalen Freigabe sowie die Sicherstellung der definierten Qualitäts- und Freigabeprozesse gemäß den Unternehmensrichtlinien. Zudem ist die Ablage der finalen Daten in den entsprechenden Systemen wie Promo-Office-Datenbank, PDM und Internet-CMS erforderlich. - Erstellung von Datenblättern, Produktbroschüren und Katalogen gemäß den Vorgaben. - Aufbereitung der Daten für die Druckproduktion und ISO-konforme Ablage im Produktmanagement-System. - Steuerung der versionierten Dokumente für Druckproduktion und Veröffentlichung in Online-Medien. - Sicherstellung der definierten Qualitäts- und Freigabeprozesse. - Ablage der finalen Daten in den entsprechenden Systemen.

A company is looking for an experienced sea cable tester with an electrical engineering or physics background. The project's objective is to advise and support the cable tendering process, cable qualification, as well as the definition and execution of tests during the project phase. The role includes collaborating with bidders, defining requirements, and providing guidance on test procedures to ensure the quality and functionality of the cables. - Advising on cable tendering and cable qualification for the project phase - Defining requirements for manufacturing, intermediate storage, installation, completion, and testing - Contract negotiations with bidders - Defining test requirements for all tests from type tests to Site Acceptance Tests (SAT) - Advising on and defining test procedures: from production through FAT tests to type tests and Site Acceptance Tests - Specific adaptation of test systems and methods for the project

A company is looking for a Siemens PLC Programmer to support a hybrid setup in Siegen. The project focuses on programming and optimizing Siemens PLC systems, particularly within the steel industry. The role requires expertise in S120 and G120 servo drives. The ideal candidate should live close to Siegen to facilitate on-site work when required. Key responsibilities: - Programming and optimizing Siemens PLC systems. - Working with S120 and G120 servo drives. - Collaborating with the team to ensure smooth operations in a hybrid setup. - Troubleshooting and resolving technical issues. - Ensuring compliance with industry standards and safety regulations.

A company is seeking an experienced Technical Project Manager in the field of district heating. The project's objective is the planning and construction of district heating pipelines across all service phases of the HOAI as well as taking on complex project tasks. The project manager will play a key role in overseeing and coordinating projects, working closely with engineering firms, municipalities, authorities and internal stakeholders. The role includes the development and optimization of planning variants to maximize the efficiency and sustainability of the projects. In addition, the project manager will continuously improve technical planning guidelines and processes, conduct technical-economic analyses, develop scenarios and prepare concepts. Another focus is on budget planning for network investments in the field of heating, in close coordination with central controlling, as well as performing network calculations. - Planning and construction of district heating pipelines across all service phases of the HOAI. - Management and coordination of projects in cooperation with engineering firms, municipalities, authorities and internal stakeholders. - Development and optimization of planning variants to increase efficiency and sustainability. - Support in improving technical planning guidelines and processes. - Conducting technical-economic analyses as well as developing scenarios and concepts. - Preparing budget planning for network investments in the field of heating. - Performing network calculations.

A company in the decentralized ventilation systems sector is looking for an experienced Odoo CRM expert to implement and customize Odoo CRM and the Sales module. The goal is to map sales processes efficiently and train an internal team member so that she can independently work with the system in the future. - Setup and customization of Odoo CRM and Sales module - Development of efficient workflows (Lead → Quotation → Order) - User roles and permissions management - Configuration of custom fields, filters, and dashboards - Assistance with data import - Training of the internal project team member

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact for electrical commissioning issues on-site, navigating complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary, ensuring clear communication with stakeholders. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: - If blame is justified → propose and implement a solution. - If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

A leading automotive supplier is seeking an experienced quality expert to inspect weld seams on safety-critical body components. The project involves ensuring the highest quality standards through non-destructive testing methods. - Typical tasks: Independent planning, execution and evaluation of non-destructive tests (NDT), especially visual testing (VT) and ultrasonic testing (UT). Creation and management of test plans and work instructions. Detailed documentation of test results in CAQ systems. Analysis of defect patterns and initiation of corrective actions in close coordination with welding and production planning. Calibration and maintenance of testing equipment. - Relevant technologies/tools: Ultrasonic testing equipment, endoscopes, videoscopes, CAQ software (e.g. Babtec, QSYS), knowledge of standards DIN EN ISO 9712, ISO 5817, and relevant VDA volumes. - KPIs/success metrics: First Pass Yield (FPY) > 98%, reduction of internal defect rate (PPM), zero-defect tolerance for safety-critical seams (Escape Rate = 0), timely completion of test orders. - Special challenges: Assessment of complex seam geometries under time pressure. Clear interpretation of test results and distinction between acceptable irregularities and critical defects. Enforcement of quality standards with production. - Deliverables: Completed test protocols, detailed failure analyses and reports, updated work and test instructions, contributions to FMEAs (Failure Mode and Effects Analysis). - Best practices: Regular team coordination (shopfloor management), continuous improvement of testing processes (CIP), raising awareness and training of production staff.

An experienced PLC programmer is sought for an internationally active special machine manufacturer to implement demanding automation projects. The focus is on new programming and commissioning of controllers. - Typical tasks: Development, testing and documentation of PLC software for new installations with Siemens SIMATIC S7 (TIA Portal) and/or CODESYS V3. Creation and adaptation of HMI visualizations (e.g. with WinCC Unified, TwinCAT HMI). Commissioning of machines and systems on site at the customer (including I/O checks, configuration of fieldbus systems such as Profinet/EtherCAT, function tests). Systematic troubleshooting and optimization of existing systems. Technical support for customer service. - Relevant technologies/tools: Siemens TIA Portal, SIMATIC S7-1500, CODESYS V3, Beckhoff TwinCAT, WinCC, various fieldbus configurators, EPLAN P8 (reading circuit diagrams). - KPIs/success metrics: adherence to development and commissioning schedules, reduction of commissioning time through high software quality, machine cycle time and availability (OEE), customer satisfaction after commissioning. - Special challenges: integration of hardware and software components from different manufacturers. Working under time pressure during on-site commissioning. Ensuring functional machine safety (safety PLC) according to standards (e.g. ISO 13849-1). - Deliverables: fully functional, fully documented PLC programs, final HMI projects, signed commissioning and acceptance protocols, creation or supplementation of operating manuals. - Best practices: structured programming according to standards (e.g. IEC 61131-3), modular and reusable software blocks, consistent version control of code (e.g. in Git).

- Construction management for the installation of electrical systems in the context of a grid connection project - Ensuring compliance with budget, time, and quality objectives as well as all relevant legal regulations - Reviewing technical documents such as construction plans, material lists, and performance records - Coordinating and communicating with subcontractors, suppliers, and project stakeholders - Interface management and ensuring a smooth project workflow

On behalf of a renowned client in the life sciences sector, we are seeking freelance support in the field of Clinical Data Management. The main responsibility is to coordinate all data management activities in clinical trials. - Typical areas of responsibility in this role:** - Creation and review of the Data Management Plan (DMP) and the Data Validation Plan (DVP). - Design and implementation of electronic case report forms (eCRFs) in EDC systems (Electronic Data Capture). - Coordination of data collection, validation, and cleaning throughout the study lifecycle. - Development and execution of query processes to resolve data inconsistencies with investigational sites. - Medical coding of adverse events (AEs) and medications (e.g., with MedDRA, WHODrug). - Conducting SAE reconciliation (alignment of serious adverse events). - Preparation and execution of the database lock after data collection is complete. - Preparation of status reports and communication with the study team (project management, monitoring, biostatistics). - Relevant technologies, tools, or methods:** - EDC systems: Medidata Rave, Oracle Clinical, Viedoc, Zelta, OpenClinica. - Programming/analysis tools: SAS, R, Python, SQL. - Standards: CDISC (SDTM, ADaM), GCP (Good Clinical Practice), 21 CFR Part 11. - Collaboration tools: MS Teams, Jira, Confluence. - Data visualization: Tableau, Power BI. - Typical KPIs or success metrics:** - Data quality: Query rate (number of queries per 1,000 data points) < X; data entry error rate < 1%. - Timeliness: Time from Last Patient Last Visit (LPLV) to database lock (target: 4–6 weeks). - Efficiency: Average time to query resolution (target: < 10 business days for critical queries). - Compliance: 100% adherence to milestones and processes defined in the DMP. - Protocol adherence: Rate of protocol deviations related to data management < 5%. - Key challenges, risks, or specifics:** - Managing increasing volumes and sources of data (e.g., wearables, ePROs). - Ensuring data integrity and security (cybersecurity, data protection/GDPR). - Complexity due to mid-study changes (protocol amendments) and their impact on the database. - Ensuring consistent data quality across globally distributed investigational sites. - Shortage of qualified specialists and high demands for onboarding study-specific systems. - Concrete deliverables:** - Finalized and approved Data Management Plan (DMP). - Live and validated study database (EDC system). - Regular data cleaning reports and status updates. - Clean, quality-assured database prepared for statistical analysis. - Final locked study database with complete audit trail. - Archived project documentation after study completion.

A company is looking for an experienced project manager with a civil engineering background for the power plant or energy industry. The goal of the project is to lead the planning, coordination, and implementation of construction projects in the energy and power plant sector. The role requires close collaboration with interdisciplinary teams to ensure that projects are completed on time and within budget. It is expressly stated that no site managers are being sought. Main Responsibilities: - Lead and supervise construction projects in the power plant or energy industry - Coordinate between various disciplines and external partners - Ensure compliance with safety and quality standards - Create and monitor project plans and budgets - Identify and solve technical challenges - Report to stakeholders and management

A company is looking for an experienced SAP Basis Administrator specialized in the administration and operation of the SAP Basis system landscape. The focus of the project is on ensuring a stable and high-performance SAP Basis operation, as well as supporting the ongoing SAP S/4HANA transformation. Additionally, the administrator will be involved in system relocations, migrations, and parallel operation of legacy systems, as well as handling troubleshooting, performance optimization, monitoring, and user management. - Administration and operation of the SAP Basis system landscape - Support in provisioning and operating SAP systems on IBM Power systems (Unix) - Collaboration on the ongoing SAP S/4HANA transformation - Participation in system relocations, migrations, and the parallel running of legacy systems - Troubleshooting, performance optimization, monitoring, and user management