For a large pharmaceutical company, an IMP (Investigational Medicinal Product) Quality Manager is sought to ensure GMP compliance and quality of investigational products. **Typical responsibilities in this role:** - Review and approval of manufacturing and batch protocols (Batch Records) for drug substance and drug product. - Execution of final quality release of investigational products for use in clinical trials. - Review and approval of GMP-relevant documents such as SOPs, validation reports, deviations and change control requests. - Creation and maintenance of product-specific quality agreements with internal and external partners. - Support for production and QC departments on all GMP-related questions and quality issues. - Planning and conducting internal audits and support during regulatory inspections and external audits. - Management and oversight of CAPA (Corrective and Preventive Actions) measures for sustainable problem resolution. **Relevant technologies, tools or methods:** - Quality management systems (QMS): Veeva Vault QMS, MasterControl, TrackWise, SAP QM. - Document Management Systems (DMS): Veeva Vault, OpenText Documentum. - ERP systems: SAP S/4HANA (especially QM module). - Laboratory Information Management Systems (LIMS). - Manufacturing Execution Systems (MES). - Methods: risk analysis (FMEA), root cause analysis (5 Whys, Ishikawa), statistical process control (SPC). **Typical KPIs or success metrics:** - Batch Release Time: average time from production completion to final release (target: < X days). - Right-First-Time Rate: percentage of batches released without deviations or rework (target: > 95%). - CAPA Effectiveness: reduction in recurrence rate of deviations after CAPA implementation (target: > 80%). - Audit Performance: number of critical/major findings in internal and external audits (target: 0). - Deviation Closure Rate: percentage of deviations closed within the defined timeframe (target: > 90%). **Key challenges, risks or specifics:** - High complexity and variability due to the development of new molecules and processes in the clinical phase. - Strict adherence to constantly evolving GMP regulations (e.g. EU Annex 1 for sterile products). - Ensuring product quality and patient safety under high time pressure (time-to-market). - Managing interfaces between development, manufacturing, QC, and regulatory affairs. - Risk of supply chain interruptions for critical raw materials or services. - Ensuring data integrity in all quality-relevant systems. **Concrete deliverables:** - Released batches of investigational products. - Approved master batch records and SOPs. - Completed and assessed deviation and change reports. - Audit and inspection reports with tracked action plans. - Valid quality agreements with all relevant partners. - Regular quality reports for management.

A company is looking for an experienced MES consultant focusing on Hydra X from MPDV to support the expansion of the system to additional sites. The system is already rolled out at one site and is now to be further scaled. The role includes supporting the introduction of new functions or versions of the system, implementing system adjustments and optimizations based on production requirements, as well as accompanying the rollout. The consultant will work closely with internal teams and external service providers to ensure the rapid identification and resolution of issues in the MES system. - Support in the introduction of new functions or versions of the system - Implementation of system adjustments and optimizations based on production requirements - Assistance with the rollout to additional sites - Rapid identification and resolution of problems in the MES system

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact on-site for electrical commissioning issues, reviewing complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary. Clear communication with stakeholders and independent client-side representation are key aspects of this role. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: If blame is justified → propose and implement a solution. If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

A company is looking for a talented Footwear Designer to work on the design of Mountain Bike Footwear for SS27. The project involves creating innovative and functional designs that align with the brand's identity and meet the needs of mountain biking enthusiasts. The role requires a deep understanding of footwear design, materials, and trends, as well as the ability to translate concepts into market-ready products. The designer will collaborate closely with cross-functional teams to ensure the designs are both aesthetically appealing and technically sound. - Develop creative and functional designs for Mountain Bike Footwear for SS27 late add and FW27 FIVE TEN Footwear. - Conduct research on market trends, materials, and user needs. - Collaborate with cross-functional teams to ensure designs meet technical and aesthetic requirements. - Create detailed sketches, prototypes, and specifications for production. - Ensure designs align with the brand's identity and target audience.

For a project in the power plant environment, a freelance specialist for the migration and adaptation of the ABB 800xA control system is urgently sought. - Typical tasks in this role:** - Implementation of programming and commissioning with the ABB 800xA process control system. - Migration of existing control system logic to the new system version, including adaptation of controllers and I/O modules. - Creation and adaptation of process displays, operator interfaces, and alarm management configurations. - Execution of system tests, error analysis, and performance optimizations to ensure plant availability and controllability. - Technical support for operations personnel during the commissioning and ramp-up phase. - Preparation and maintenance of technical documentation (functional diagrams, configuration descriptions, test protocols). - Close collaboration with the process engineering, electrical engineering departments, and the plant operator. - Relevant technologies, tools or methods:** - Control system: ABB Ability™ System 800xA (including AC 800M controller, Information Management, Batch Control). - Engineering tools: Control Builder M, Process Graphics Migration Tool, Bulk Data Manager. - Fieldbus systems: PROFIBUS, Foundation Fieldbus, Modbus. - Virtualization: VMware, Hyper-V for test and development environments. - Databases: SQL knowledge for analysis of historical data (e.g. 800xA History). - Knowledge of relevant standards for process and power plant technology (e.g. IEC 61508, IEC 61511). - Typical KPIs or success metrics:** - Migration speed: number of migrated system components/functions per week/month. - System availability: control system uptime after migration > 99.9%. - Commissioning error rate: number of critical software bugs after go-live < 5. - Test coverage: percentage of successfully executed and documented test cases > 95%. - Adherence to project schedule: completion of migration and commissioning by the defined deadline. - Operator acceptance: positive feedback from operations personnel on the new system environment. - Specific challenges, risks or peculiarities:** - Migration during live operation (“brownfield”) with minimal downtime. - Ensuring compatibility between old and new system components (hardware/software). - High complexity of process logic in power plants (e.g. boiler control, turbine regulation). - Risk of cybersecurity vulnerabilities in networked control systems (e.g. CVEs for 800xA). - Management of interfaces to third-party systems (e.g. MES, ERP). - Need for intensive and precise collaboration between control engineering, process engineering, and operations. - Concrete deliverables:** - Migrated and operational control logic on the target system. - Fully tested and customer-approved process displays and operator interfaces. - Acceptance protocols for Factory Acceptance Test (FAT) and Site Acceptance Test (SAT). - Updated technical plant documentation. - Final migration report with lessons learned. - Trained operations personnel.

An EPC consultant is seeking an experienced Construction Manager (Mechanical) for the execution of a biogas plant. The goal of the project is the construction supervision and ensuring mechanical works are carried out in accordance with project requirements. In this role, you take responsibility for construction supervision and coordinate the mechanical works on site. You work closely with other project stakeholders to ensure compliance with schedules, quality standards and safety regulations. - Supervision of mechanical construction works at the biogas plant - Ensuring adherence to schedules and quality standards - Coordination of subcontractors and suppliers - Conducting regular site inspections and reporting - Assisting in resolving technical challenges on site - Compliance with safety regulations and environmental standards

A company is seeking support for a project aimed at transparently mapping the overall ordering process in the Portals area. The goal is to combine relevant data sources from order to activation to enable a holistic view of the end-to-end process. This should facilitate the identification of process deviations and optimization potentials. Key project milestones include connecting the required data sources, building self-service reports, and implementing automated alerts for deviations in the process flow. The challenge lies in the technical and professional integration of heterogeneous systems and data flows to ensure consistent monitoring and control of the ordering process. - Analysis and documentation of requirements in the Omnichannel area using requirements management tools and structured collection methods - Professional and technical analysis of existing data sources and ETL processes using database tools - Recording and evaluation of existing interfaces between source and target systems based on technical documentation - Consulting on technical integration of defined data sources into the Celonis environment considering the tools used (Celonis EMS, Data Pool and Data Push API) - Creation of technical queries and representations for process visualization based on provided platform functions (Celonis PQL, Studio) - Use of system-side functions for visualization and analysis of existing business processes (via Celonis Process Explorer) - Professional consulting on technical interfaces, data provision and systemic requirements

A company is looking for a specialist site manager for electrical engineering as well as a specialist site manager for control engineering (Siemens T3000) for a demanding project. The aim of the project is the technical monitoring and control of the control system interfaces of the existing plant during the integration of the new plant, as well as ensuring quality and contract compliance during the construction and commissioning phase. The role requires intensive coordination and monitoring of interfaces with construction planning due to the size of the project. The site manager will work closely with control engineers, planners, experts and contractors to ensure the successful implementation of the project. Key responsibilities: - Technical monitoring of the control system interfaces of the existing plant during the integration of the new plant - Technical management of control engineers, planners, experts and contractors - Preparation of technical and project phase–dependent documentation - Participation in project meetings and negotiations - Technical management of quality assurance and quality control during the construction and commissioning phase - Consulting on control system commissioning - Technical coordination with design engineers on quality monitoring tasks - Monitoring contract compliance and conducting quality inspections - Participation in safety meetings and implementation of measures to address identified deficiencies

Ein Unternehmen sucht einen erfahrenen Technischen Redakteur, der für die Erstellung und Verwaltung von Datenblättern, Produktbroschüren und Katalogen verantwortlich ist. Diese Dokumente sind entscheidend für den Vertrieb, rechtsverbindlich und Teil der internen Qualitätssicherung. Die Produktbroschüren präsentieren die wesentlichen Produktmerkmale und den Kundennutzen, während die Datenblätter detaillierte Spezifikationen enthalten. Die Rolle umfasst die eigenverantwortliche Steuerung und Überwachung sämtlicher Korrektur- und Abstimmprozesse bis zur finalen Freigabe sowie die Sicherstellung der definierten Qualitäts- und Freigabeprozesse gemäß den Unternehmensrichtlinien. Zudem ist die Ablage der finalen Daten in den entsprechenden Systemen wie Promo-Office-Datenbank, PDM und Internet-CMS erforderlich. - Erstellung von Datenblättern, Produktbroschüren und Katalogen gemäß den Vorgaben. - Aufbereitung der Daten für die Druckproduktion und ISO-konforme Ablage im Produktmanagement-System. - Steuerung der versionierten Dokumente für Druckproduktion und Veröffentlichung in Online-Medien. - Sicherstellung der definierten Qualitäts- und Freigabeprozesse. - Ablage der finalen Daten in den entsprechenden Systemen.

A company is seeking an experienced subsea cable tester with an electrical engineering or physics background. The project’s goal is to advise and support the cable tendering process, cable qualification, and the definition and execution of tests during the project phase. The role involves collaborating with bidders, defining requirements, and advising on test procedures to ensure the cables’ quality and functionality. - Advising on cable tendering and cable qualification for the project phase - Defining requirements for manufacturing, interim storage, installation, completion, and inspection - Conducting contract negotiations with bidders - Defining test requirements for all tests from type tests to Site Acceptance Tests (SAT) - Advising on and defining test procedures: from production through FAT tests to type tests and Site Acceptance Tests - Customizing test systems and methods specifically for the project

A company is looking for a Siemens PLC Programmer to support a hybrid setup in Siegen. The project focuses on programming and optimizing Siemens PLC systems, particularly within the steel industry. The role requires expertise in S120 and G120 servo drives. The ideal candidate should live close to Siegen to facilitate on-site work when required. Key responsibilities: - Programming and optimizing Siemens PLC systems. - Working with S120 and G120 servo drives. - Collaborating with the team to ensure smooth operations in a hybrid setup. - Troubleshooting and resolving technical issues. - Ensuring compliance with industry standards and safety regulations.

A company in the decentralized ventilation systems sector is looking for an experienced Odoo CRM expert to implement and customize Odoo CRM and the Sales module. The goal is to map sales processes efficiently and train an internal team member so that she can independently work with the system in the future. - Setup and customization of Odoo CRM and Sales module - Development of efficient workflows (Lead → Quotation → Order) - User roles and permissions management - Configuration of custom fields, filters, and dashboards - Assistance with data import - Training of the internal project team member

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact for electrical commissioning issues on-site, navigating complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary, ensuring clear communication with stakeholders. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: - If blame is justified → propose and implement a solution. - If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

A company is looking for an experienced Technical Project Manager in the field of district heating. The project objective is the planning and construction of district heating pipelines across all service phases of HOAI, as well as taking on complex project tasks. The Project Manager will play a key role in managing and coordinating projects, working closely with engineering firms, municipalities, authorities, and internal stakeholders. The role includes developing and optimizing planning options to maximize the efficiency and sustainability of projects. In addition, the Project Manager will continuously improve technical planning guidelines and processes, conduct technical-economic analyses, develop scenarios, and create concepts. Another focus is on budget planning for network investments in the heating sector, in close coordination with central controlling, as well as performing network calculations. - Planning and construction of district heating pipelines across all service phases of HOAI. - Management and coordination of projects in collaboration with engineering firms, municipalities, authorities, and internal stakeholders. - Development and optimization of planning options to increase efficiency and sustainability. - Support in improving technical planning guidelines and processes. - Conducting technical-economic analyses as well as developing scenarios and concepts. - Preparing budget planning for network investments in the heating sector. - Performing network calculations.

A leading automotive supplier is seeking an experienced quality expert for the inspection of weld seams on safety-critical body components. The project includes ensuring the highest quality standards through non-destructive testing methods. - Typical tasks: Independent planning, execution and evaluation of non-destructive tests (NDT), in particular visual testing (VT) and ultrasonic testing (UT). Creation and management of test plans and work instructions. Detailed documentation of test results in CAQ systems. Analysis of defect patterns and initiation of corrective actions in close coordination with welding shop and production planning. Calibration and maintenance of testing equipment. - Relevant technologies/tools: Ultrasonic testing devices, endoscopes, videoscopes, CAQ software (e.g. Babtec, QSYS), knowledge of standards DIN EN ISO 9712, ISO 5817, as well as relevant VDA volumes. - KPIs/success metrics: First Pass Yield (FPY) > 98%, reduction of internal defect rate (PPM), zero-defect tolerance on safety-critical seams (escape rate = 0), on-time completion of test orders. - Special challenges: Evaluating complex seam geometries under time pressure. Clear interpretation of test results and distinguishing between permissible irregularities and critical defects. Enforcing quality standards against production. - Deliverables: Completed test protocols, detailed defect analyses and reports, updated work and test instructions, contributions to FMEAs (Failure Mode and Effects Analysis). - Best practices: Regular team coordination (shopfloor management), continuous improvement of test processes (CIP), raising awareness and training of production staff.

- Construction management for the installation of electrical systems in the context of a grid connection project - Ensuring compliance with budget, schedule and quality objectives as well as all relevant legal regulations - Reviewing technical documents such as construction plans, material lists and performance records - Coordination and communication with subcontractors, suppliers and project stakeholders - Interface management and ensuring a smooth project process

For an internationally active manufacturer of special machinery, an experienced PLC programmer is sought to implement demanding automation projects. The focus is on new programming and commissioning of control systems. - Typical areas of responsibility: Development, testing and documentation of PLC software for new systems using Siemens SIMATIC S7 (TIA Portal) and/or CODESYS V3. Creation and adaptation of HMI visualizations (e.g., with WinCC Unified, TwinCAT HMI). Commissioning of machines and systems at the customer site (including I/O checks, configuration of fieldbus systems such as Profinet/EtherCAT, functional tests). Systematic troubleshooting and optimization of existing systems. Technical support for customer service. - Relevant technologies/tools: Siemens TIA Portal, SIMATIC S7-1500, CODESYS V3, Beckhoff TwinCAT, WinCC, various fieldbus configurators, EPLAN P8 (reading circuit diagrams). - KPIs/success metrics: Adherence to development and commissioning schedules, reduction of commissioning time through high software quality, machine cycle time and availability (OEE), customer satisfaction after commissioning. - Special challenges: Integration of hardware and software components from various manufacturers. Working under time pressure during on-site commissioning. Ensuring functional machine safety (Safety PLC) according to standards (e.g., ISO 13849-1). - Deliverables: Operational, fully documented PLC programs, final HMI projects, signed commissioning and acceptance protocols, creation or supplementing of operating manuals. - Best practices: Structured programming according to standards (e.g., IEC 61131-3), modular and reusable software blocks, consistent version control of code (e.g., in Git).

In assignment for a renowned client in the life sciences sector, a freelance support is sought in the area of Clinical Data Management. The main task is taking responsibility for coordinating all data management activities in clinical trials. - Typical responsibilities in this role:** - Creation and review of the Data Management Plan (DMP) and the Data Validation Plan (DVP). - Design and implementation of electronic case report forms (eCRFs) in EDC systems (Electronic Data Capture). - Coordination of data collection, validation, and cleaning throughout the study lifecycle. - Development and execution of query processes to resolve data inconsistencies with investigative sites. - Medical coding of adverse events (AEs) and medications (e.g., using MedDRA, WHODrug). - Conducting SAE reconciliation (matching serious adverse events). - Preparation and execution of database locks after data collection is complete. - Preparation of status reports and communication with the study team (project management, monitoring, biostatistics). - Relevant technologies, tools, or methods:** - EDC Systems: Medidata Rave, Oracle Clinical, Viedoc, Zelta, OpenClinica. - Programming/analysis tools: SAS, R, Python, SQL. - Standards: CDISC (SDTM, ADaM), GCP (Good Clinical Practice), 21 CFR Part 11. - Collaboration tools: MS Teams, Jira, Confluence. - Data visualization: Tableau, Power BI. - Typical KPIs or success metrics:** - Data quality: Query rate (number of queries per 1,000 data points) < X; data entry error rate < 1%. - Time management: Time from last patient last visit (LPLV) to database lock (target: 4–6 weeks). - Efficiency: Average time to query resolution (target: < 10 business days for critical queries). - Compliance: 100% adherence to DMP-defined milestones and processes. - Protocol adherence: Rate of protocol deviations related to data management < 5%. - Key challenges, risks, or specifics:** - Managing increasing volumes and sources of data (e.g., wearables, ePROs). - Ensuring data integrity and security (cybersecurity, data protection/GDPR). - Complexity due to mid-study changes (protocol amendments) and their impact on the database. - Ensuring consistent data quality across multiple global investigative sites. - Shortage of qualified specialists and high demands for onboarding in study-specific systems. - Concrete deliverables:** - Finalized and approved Data Management Plan (DMP). - Live and validated study database (EDC system). - Regular data cleaning reports and status updates. - Clean, quality-assured, and analysis-ready database. - Final locked study database with complete audit trail. - Archived project documentation after study close-out.

A company is looking for an experienced project manager with a civil engineering background for the power plant or energy industry. The aim of the project is to lead the planning, coordination and implementation of construction projects in the energy and power plant sector. The role requires close collaboration with interdisciplinary teams to ensure that projects are completed on time and within budget. It is explicitly stated that construction supervisors are not being sought. Main responsibilities: - Management and oversight of construction projects in the power plant or energy industry - Coordination between various disciplines and external partners - Ensuring compliance with safety and quality standards - Development and monitoring of project schedules and budgets - Identification and resolution of technical challenges - Reporting to stakeholders and management

A company is looking for an experienced construction manager who specializes in pipe works. The goal of the project is to manage and supervise construction activities, particularly in the area of pipes with a diameter of DN2000. The construction manager will be responsible for planning, coordinating and carrying out pipe segment cutting operations. The position is entirely on-site in Düsseldorf. - Managing and supervising construction projects in the field of pipe works - Planning and execution of pipe segment cutting operations - Ensuring compliance with safety and quality standards - Coordination of teams and resources - Documentation and reporting on project progress