A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact on-site for electrical commissioning issues, reviewing complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary. Clear communication with stakeholders and independent client-side representation are key aspects of this role. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: If blame is justified → propose and implement a solution. If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact for electrical commissioning issues on-site, navigating complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary, ensuring clear communication with stakeholders. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: - If blame is justified → propose and implement a solution. - If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

A company is seeking an experienced subsea cable tester with an electrical engineering or physics background. The project’s goal is to advise and support the cable tendering process, cable qualification, and the definition and execution of tests during the project phase. The role involves collaborating with bidders, defining requirements, and advising on test procedures to ensure the cables’ quality and functionality. - Advising on cable tendering and cable qualification for the project phase - Defining requirements for manufacturing, interim storage, installation, completion, and inspection - Conducting contract negotiations with bidders - Defining test requirements for all tests from type tests to Site Acceptance Tests (SAT) - Advising on and defining test procedures: from production through FAT tests to type tests and Site Acceptance Tests - Customizing test systems and methods specifically for the project

- Ensuring that access roads are constructed and prepared according to NKT specifications - Supervising the proper construction of: - payout areas - thrust pits - other relevant structures - Checking transport on the last mile to the payout area - Monitoring the cable pull at the payout area and in the thrust pit - Collaborating with the civil engineering supervisor on: - backfilling thrust pits - dismantling access roads and payout areas - ensuring that joint pits are executed in compliance with NKT specifications - Monitoring the correct joining of the joints - Overseeing the blowing in and splicing of fiber optic cables (FOC) - Coordinating with the civil engineering supervisor on the backfilling of joint pits

A company is looking for an experienced construction supervisor with switching authorization for 110 kV and 220 kV systems, specializing in substations. The project's goal is to supervise and manage construction work related to high-voltage substations, ensuring compliance with safety standards and project schedules. The task includes leading on-site teams, coordinating with stakeholders, and ensuring the proper execution of electrical switching operations. Main tasks: - Supervision of substation construction work. - Ensuring compliance with safety regulations and standards. - Coordination with project teams and external stakeholders. - Performing electrical switching operations for 110 kV and 220 kV systems. - Managing project schedules and delivery deadlines. - Conducting quality inspections and ensuring proper documentation.

- Construction management for the installation of electrical systems in the context of a grid connection project - Ensuring compliance with budget, schedule and quality objectives as well as all relevant legal regulations - Reviewing technical documents such as construction plans, material lists and performance records - Coordination and communication with subcontractors, suppliers and project stakeholders - Interface management and ensuring a smooth project process

To support projects in the energy infrastructure sector, a freelance electrical engineer with a focus on high and extra-high voltage is sought as a Primary Planner (m/f/d). The projects include grid connections of generation plants (particularly wind and solar farms) as well as the construction and modification of substations. - Typical areas of responsibility in this role:** - Development of primary technical concepts and layouts for air- and gas-insulated high and extra-high voltage switchgear (AIS/GIS) from 110 kV to 380 kV. - Design and sizing of primary equipment (circuit breakers, disconnectors, instrument transformers, transformers, etc.). - Creation of wiring diagrams, single-line overviews, and arrangement drawings. - Performing short-circuit and load-flow calculations as well as sizing grounding systems and lightning protection. - Technical clarification and coordination with clients, grid operators, authorities, and suppliers. - Preparation of technical specifications and tender documents for primary technology. - Coordination with other disciplines such as secondary technology, structural engineering, and control systems. - Support during commissioning and acceptance of the installations. - Relevant technologies, tools or methods:** - Planning software: AutoCAD, Primtech, REVIT, EPLAN. - Calculation tools: PowerFactory (DIgSILENT), NEPLAN, or manufacturer-specific tools. - Standards & regulations: VDE-AR-N 4120 (High Voltage Application Rules), IEC standards, EN standards. - Project management tools: MS Project, Jira. - BIM (Building Information Modeling) in plant engineering. - Typical KPIs or success metrics:** - Planning quality: Number of necessary plan revisions after approval < 5%. - Schedule adherence: Compliance with planning milestones according to the overall project schedule. - Cost efficiency: Adherence to budget targets for the planned primary technology. - Technical compliance: Successful acceptance of the installation by the grid operator without primary technical objections. - Interface management: Seamless coordination, measured by the number of delays in other disciplines caused by planning errors. - Special challenges, risks or specifics:** - High complexity and safety requirements in the high and extra-high voltage domain. - Necessity of exact compliance with grid connection guidelines (TAR) of the respective grid operators. - Long lead times and price fluctuations for large primary components. - Coordination in confined spaces, especially during modifications to existing facilities. - Increasing requirements due to the integration of renewable energies (e.g., reactive power management, FRT behavior). - Ensuring physical safety and occupational health in planning. - Concrete deliverables:** - Approval-ready primary technical planning documents (layouts, elevations, sections). - Final wiring diagrams and single-line diagrams. - Technical calculation reports (e.g., short-circuit withstand capability, grounding). - Prepared bills of quantities and technical specifications for procurement. - Protocols of technical coordination meetings. - Revision documents and as-built documentation.

A company is looking for a specialist site manager for electrical engineering as well as a specialist site manager for control engineering (Siemens T3000) for a demanding project. The aim of the project is the technical monitoring and control of the control system interfaces of the existing plant during the integration of the new plant, as well as ensuring quality and contract compliance during the construction and commissioning phase. The role requires intensive coordination and monitoring of interfaces with construction planning due to the size of the project. The site manager will work closely with control engineers, planners, experts and contractors to ensure the successful implementation of the project. Key responsibilities: - Technical monitoring of the control system interfaces of the existing plant during the integration of the new plant - Technical management of control engineers, planners, experts and contractors - Preparation of technical and project phase–dependent documentation - Participation in project meetings and negotiations - Technical management of quality assurance and quality control during the construction and commissioning phase - Consulting on control system commissioning - Technical coordination with design engineers on quality monitoring tasks - Monitoring contract compliance and conducting quality inspections - Participation in safety meetings and implementation of measures to address identified deficiencies

A company is seeking support for carrying out the engineering for power generation and consumption facilities and their connection to the transmission and/or distribution grids of grid operators in Germany and abroad. The project includes both existing facilities and power plants, energy consumption and hybrid facilities under development, such as battery systems. The goal is to plan, coordinate and implement grid connections efficiently. Main tasks: - Managing approval processes for grid connections at the respective grid voltage level - Preparation of technical documents for grid connection requests - Creation of grid connection applications including technical documentation for grid operators - Technical engineering for grid connection concepts - Planning of high-voltage, medium-voltage switchgear and substations - Basic and detailed engineering including tender documents and specifications - Development of technical standards to implement quality requirements - Control and coordination tasks within project execution - Consulting and coordination of quality assurance measures - Project management considering technical regulations and project management strategies - Advice on contract management, e.g. grid connection agreements - Coordination of processes and execution of on-site construction supervision measures - Development of retrofit concepts for conventional power plants, hydropower plants and other facilities

An EPC consultant is seeking an experienced Construction Manager (Mechanical) for the execution of a biogas plant. The goal of the project is the construction supervision and ensuring mechanical works are carried out in accordance with project requirements. In this role, you take responsibility for construction supervision and coordinate the mechanical works on site. You work closely with other project stakeholders to ensure compliance with schedules, quality standards and safety regulations. - Supervision of mechanical construction works at the biogas plant - Ensuring adherence to schedules and quality standards - Coordination of subcontractors and suppliers - Conducting regular site inspections and reporting - Assisting in resolving technical challenges on site - Compliance with safety regulations and environmental standards

A company is urgently seeking qualified commissioning engineers for an ongoing project at the Salzgitter site. The project’s objective is the commissioning and optimization of HVAC systems, ideally in the cleanroom sector. The role involves on-site work, shift work (periodically) and a 5-day work week. Main tasks: - Commissioning and optimization of HVAC systems - On-site work, including tasks on ladders, scaffolding and platforms - Coordination and organization of workflows - Communication with various project stakeholders - Ensuring compliance with technical standards and safety regulations

An organization is seeking an experienced construction supervisor or site manager in the fiber optics environment to professionally accompany and oversee the construction services of a general contractor in FTTH broadband deployment. The goal is to ensure that the construction services comply with the requirements of the execution planning and that the FTTH broadband network is fully rolled out. The construction sites are located near Würzburg and Saarbrücken. The role includes monitoring compliance with schedules, occupational safety requirements, and quality of construction services, as well as coordinating and documenting construction activities. The site manager will independently create a construction diary and a complete documentation, track subcontracted services, and verify the accuracy of planning and construction documents. - Professional accompaniment and oversight of a general contractor's construction services in FTTH broadband expansion. - Ensuring adherence to schedules, occupational safety requirements, and the quality of construction services. - Recording and reviewing the planning and construction documents of third-party companies. - Independently creating a construction diary and complete documentation. - Tracking deadlines, controlling, and documenting ordered services and deliveries. - Construction supervision and safety control of the construction site according to the HSE concept.

A company is looking for an experienced Technical Project Manager in the field of district heating. The project objective is the planning and construction of district heating pipelines across all service phases of HOAI, as well as taking on complex project tasks. The Project Manager will play a key role in managing and coordinating projects, working closely with engineering firms, municipalities, authorities, and internal stakeholders. The role includes developing and optimizing planning options to maximize the efficiency and sustainability of projects. In addition, the Project Manager will continuously improve technical planning guidelines and processes, conduct technical-economic analyses, develop scenarios, and create concepts. Another focus is on budget planning for network investments in the heating sector, in close coordination with central controlling, as well as performing network calculations. - Planning and construction of district heating pipelines across all service phases of HOAI. - Management and coordination of projects in collaboration with engineering firms, municipalities, authorities, and internal stakeholders. - Development and optimization of planning options to increase efficiency and sustainability. - Support in improving technical planning guidelines and processes. - Conducting technical-economic analyses as well as developing scenarios and concepts. - Preparing budget planning for network investments in the heating sector. - Performing network calculations.

A company is looking for an experienced construction manager who specializes in pipe works. The goal of the project is to manage and supervise construction activities, particularly in the area of pipes with a diameter of DN2000. The construction manager will be responsible for planning, coordinating and carrying out pipe segment cutting operations. The position is entirely on-site in Düsseldorf. - Managing and supervising construction projects in the field of pipe works - Planning and execution of pipe segment cutting operations - Ensuring compliance with safety and quality standards - Coordination of teams and resources - Documentation and reporting on project progress

For an internationally active manufacturer of special machinery, an experienced PLC programmer is sought to implement demanding automation projects. The focus is on new programming and commissioning of control systems. - Typical areas of responsibility: Development, testing and documentation of PLC software for new systems using Siemens SIMATIC S7 (TIA Portal) and/or CODESYS V3. Creation and adaptation of HMI visualizations (e.g., with WinCC Unified, TwinCAT HMI). Commissioning of machines and systems at the customer site (including I/O checks, configuration of fieldbus systems such as Profinet/EtherCAT, functional tests). Systematic troubleshooting and optimization of existing systems. Technical support for customer service. - Relevant technologies/tools: Siemens TIA Portal, SIMATIC S7-1500, CODESYS V3, Beckhoff TwinCAT, WinCC, various fieldbus configurators, EPLAN P8 (reading circuit diagrams). - KPIs/success metrics: Adherence to development and commissioning schedules, reduction of commissioning time through high software quality, machine cycle time and availability (OEE), customer satisfaction after commissioning. - Special challenges: Integration of hardware and software components from various manufacturers. Working under time pressure during on-site commissioning. Ensuring functional machine safety (Safety PLC) according to standards (e.g., ISO 13849-1). - Deliverables: Operational, fully documented PLC programs, final HMI projects, signed commissioning and acceptance protocols, creation or supplementing of operating manuals. - Best practices: Structured programming according to standards (e.g., IEC 61131-3), modular and reusable software blocks, consistent version control of code (e.g., in Git).

On behalf of a leading medical technology company, an experienced technical drafter or product designer is being sought to create and maintain technical documentation and design drawings. - **Typical responsibilities:** - Creation of standards-compliant 2D manufacturing drawings and 3D models of parts and assemblies using CAD software. - Detailing and dimensioning of designs, considering geometric and positional tolerances. - Creation and management of bills of materials and technical documents in the PDM/PLM system (e.g., SAP ECTR). - Implementation of revision services on existing drawings and documentation. - Close collaboration with the development and production departments to ensure manufacturability. - **Relevant technologies, tools or methods:** - CAD systems: Siemens NX, SolidWorks, CATIA V5, Autodesk Inventor (depending on client system) - PDM/PLM systems: SAP ECTR, Teamcenter, Windchill - Standards: thorough knowledge of relevant ISO and DIN standards for technical drawings, especially in regulated environments. - ERP systems: SAP S/4HANA - **Typical KPIs or success metrics:** - On-time delivery of drawings and documents. - Error rate in technical documentation (number of required correction loops). - Compliance with internal and external design and documentation standards. - Efficiency in implementing changes (throughput time). - **Key challenges, risks or specifics:** - High demands on accuracy and completeness of documentation due to strict regulatory requirements in medical technology (MDR). - Seamless traceability of changes (versioning). - Complexity of parts to be designed (e.g., freeform surfaces, complex assemblies). - Close coordination with various stakeholders (development, purchasing, quality assurance, production). - **Concrete deliverables:** - Approval-ready 2D manufacturing drawings and 3D CAD models. - Complete and released bills of materials in the ERP system. - Updated technical product documentation. - Change logs. - **Lessons learned/best practices:** - A clear and standardized template management significantly accelerates the creation process. - Regular alignment meetings with production can prevent costly errors early. - Careful maintenance of master data in the PDM/PLM system is the foundation for efficient collaboration.

The ProMi Squad (Process Mining) project aims to transparently map the end-to-end order process in the portals area. Relevant data sources from ordering to activation are consolidated for this purpose. The holistic view of the end-to-end process enables the identification of process deviations and optimization potentials. Key milestones of the project are the integration of the required data sources, the development of self-service reports, and the implementation of automated alerts for deviations in the process flow. The challenge lies in the technical and functional integration of heterogeneous systems and data streams to ensure consistent monitoring and control of the order process. ⸻ Service description - Analysis and documentation of requirements in the omnichannel area using requirements management tools and structured elicitation methods - Functional and technical analysis of existing data sources and ETL processes using database tools - Recording and evaluation of existing interfaces between source and target systems based on technical documentation - Consulting on the technical integration of defined data sources into the Celonis environment, taking into account the tools used (Celonis EMS, Data Pool, and Data Push API) - Creation of technical queries and representations for process visualization based on the provided platform functions (Celonis PQL, Studio) - Use of system functions for visualization and analysis of existing business processes (via the Celonis Process Explorer) - Functional consulting on technical interfaces, data provisioning, and system prerequisites

- Collaborate in the software development process in the field of process automation and word processing - 3rd level support - Participate in the analysis of software requirements in an agile development environment

- Customizing / parametrization of the core banking system according to the requirements of the business division - Maintaining ongoing operations - Initial and further training of internal staff

- IT project manager activities - Interface / bridging function between business domain and technology, hence the required compelling subject matter expertise.