A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact for electrical commissioning issues on-site, navigating complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary, ensuring clear communication with stakeholders. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: - If blame is justified → propose and implement a solution. - If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

A company is seeking a specialist construction manager for electrical engineering and a specialist construction manager for control systems (Siemens T3000) for a demanding project. The goal of the project is the technical supervision and management of the control system interfaces of the existing plant during the integration of the new system, as well as ensuring quality and contractual compliance during construction and commissioning phases. The role requires intensive coordination and monitoring of interfaces with construction planning due to the project’s scale. The construction manager will work closely with control engineers, planners, experts, and contractors to ensure the successful execution of the project. Main tasks: - Technical supervision of the control system interfaces of the existing plant during the integration of the new system - Technical management of control engineers, planners, experts, and contractors - Preparation of specialist and project-phase specific documents - Participation in project meetings and negotiations - Technical management of quality assurance and quality control during construction and commissioning phases - Consulting on control system commissioning - Technical coordination with design engineers on quality monitoring tasks - Monitoring contractual compliance and conducting quality inspections - Participation in safety meetings and implementation of measures to address identified issues

- Construction management for the installation of electrical systems in the context of a grid connection project - Ensuring compliance with budget, time and quality targets as well as all relevant legal regulations - Reviewing technical documents such as construction plans, material lists and performance certificates - Coordinating and communicating with subcontractors, suppliers and project stakeholders - Interface management and ensuring a smooth project execution

A company is looking for an experienced Electrical Engineer to join a 12-month project in Berlin. The main focus of the project is supervising cable pulling. The role requires strong expertise in cables and related technologies. - Supervision and monitoring of cable pulling processes - Ensuring compliance with technical standards and safety regulations - Collaboration with other team members to ensure project success - Reporting and documentation of progress and issues

A company in the automotive industry is looking for a component responsible (m/f/d) in the wiring harness area. The project goal is the development and series support of wiring harnesses as well as the implementation of changes in this area. The role includes responsibility for components in wiring harness development and close collaboration with interdisciplinary teams to achieve project goals. Main tasks: - Component responsibility in wiring harness development - Series support and ensuring quality - Implementing changes in the wiring harness - Collaboration with internal and external stakeholders

To support projects in the field of energy infrastructure, we are looking for a freelance electrical engineer specializing in high and extra high voltage as a primary planner (m/f/d). The projects include grid connections for generation plants (especially wind and solar farms) as well as new construction and renovation of substations. - Typical tasks in this role:** - Creating primary technical concepts and layouts for air- and gas-insulated high and extra high voltage switchgear (AIS/GIS) from 110 kV to 380 kV. - Designing and sizing primary equipment (circuit breakers, disconnectors, instrument transformers, transformers, etc.). - Producing single-line diagrams, overview plans and layout drawings. - Performing short-circuit and load flow calculations, as well as sizing grounding systems and lightning protection. - Technical coordination and clarification with clients, grid operators, authorities and suppliers. - Preparing technical specifications and tender documents for primary equipment. - Coordinating with other disciplines such as secondary equipment, civil engineering and control systems. - Supporting commissioning and acceptance of the installations. - Relevant technologies, tools or methods:** - Planning software: AutoCAD, Primtech, REVIT, EPLAN. - Calculation tools: PowerFactory (DIgSILENT), NEPLAN, or vendor-specific tools. - Standards & regulations: VDE-AR-N 4120 (TAR High Voltage), IEC standards, EN standards. - Project management tools: MS Project, Jira. - BIM (Building Information Modeling) in plant engineering. - Typical KPIs or success metrics:** - Planning quality: Number of required plan changes after approval < 5%. - On-time delivery: Meeting planning milestones according to the overall project schedule. - Cost efficiency: Adherence to the budget for the planned primary equipment. - Technical compliance: Successful acceptance of the installation by the grid operator without primary technical issues. - Interface management: Smooth coordination, measured by the number of delays in other disciplines caused by planning errors. - Key challenges, risks or specifics:** - High complexity and safety requirements in the high and extra high voltage range. - Strict compliance with grid connection guidelines (TAR) of the respective grid operators. - Long lead times and price fluctuations for major primary equipment. - Coordination in confined spaces, especially during retrofit projects. - Increasing requirements due to integration of renewable energies (e.g. reactive power management, FRT behavior). - Ensuring physical safety and occupational health considerations in the design. - Concrete deliverables:** - Approval-ready primary technical planning documents (layouts, elevations, sections). - Final single-line diagrams and schematic diagrams. - Technical calculation reports (e.g. short-circuit withstand, grounding). - Bills of quantities and technical specifications for procurement. - Minutes of technical coordination meetings. - Revision documents and as-built documentation.

For a power plant project we urgently require a freelance specialist for the migration and adaptation of the ABB 800xA control system. - Typical tasks in this role:** - Implement programming and commissioning with the ABB 800xA distributed control system. - Migrate existing control logic to the new system version, including adapting controllers and I/O modules. - Create and adjust process graphics, operator interfaces, and alarm management configurations. - Perform system tests, troubleshooting and performance optimizations to ensure plant availability and control capability. - Provide technical support to operations staff during commissioning and ramp-up. - Prepare and maintain technical documentation (functional diagrams, configuration descriptions, test protocols). - Work closely with the process engineering, electrical engineering departments and the plant operator. - Relevant technologies, tools or methods:** - Control system: ABB Ability™ System 800xA (including AC 800M Controller, Information Management, Batch Control). - Engineering tools: Control Builder M, Process Graphics Migration Tool, Bulk Data Manager. - Fieldbuses: PROFIBUS, Foundation Fieldbus, Modbus. - Virtualization: VMware, Hyper-V for testing and development environments. - Databases: SQL skills for analysis of historical data (e.g. 800xA History). - Knowledge of relevant standards for process and power plant engineering (e.g. IEC 61508, IEC 61511). - Typical KPIs or success metrics:** - Migration speed: Number of system components/functions migrated per week/month. - System availability: Control system uptime after migration > 99.9%. - Commissioning error rate: Critical software bugs after go-live < 5. - Test coverage: Percentage of successfully executed and documented test cases > 95%. - Project schedule adherence: Completion of migration and commissioning by the agreed deadline. - Operator acceptance: Positive feedback from operations staff on the new system environment. - Key challenges, risks or specifics:** - Brownfield migration with minimal downtime. - Ensuring compatibility between old and new system components (hardware/software). - High complexity of plant process logic (e.g. boiler control, turbine regulation). - Risk of cybersecurity vulnerabilities in networked control systems (e.g. CVEs for 800xA). - Managing interfaces to third-party systems (e.g. MES, ERP). - Need for intensive and precise collaboration between control, process engineering and operations. - Concrete deliverables:** - Migrated and functional control logic on the target system. - Fully tested and customer-approved process graphics and operator interfaces. - Acceptance reports for Factory Acceptance Test (FAT) and Site Acceptance Test (SAT). - Updated technical plant documentation. - Final migration report with lessons learned. - Trained operations personnel.

A company is looking for an experienced construction manager to oversee projects related to overhead line construction. The role involves managing construction sites, coordinating teams, and ensuring projects are completed on time and within budget. The ideal candidate will have a strong background in overhead line work and excellent leadership skills. - Supervise and manage construction sites for overhead line projects. - Coordinate with teams and subcontractors to ensure smooth project execution. - Monitor project progress and ensure adherence to timelines and budgets. - Ensure compliance with safety regulations and quality standards. - Communicate effectively with stakeholders and provide regular updates.

A company is seeking support for carrying out the engineering of energy generation and consumption plants and their connection to the transmission and/or distribution grids of network operators in Germany and abroad. The project includes both existing plants and those under development, such as power plants, consumer installations, and hybrid systems like battery installations. The goal is to plan, coordinate, and implement grid connections efficiently. Main tasks: - Managing approval processes for grid connections at the respective voltage level - Preparing technical documents for grid connection requests - Creating grid connection applications, including technical documentation for network operators - Technical engineering for grid connection concepts - Designing extra-high, high, and medium-voltage switchgear and substations - Basic and detailed engineering, including tender documents and specifications - Developing technical standards to implement quality requirements - Control and coordination tasks within project execution - Consulting and coordination for quality assurance measures - Project management in line with technical regulations and project management strategies - Advice on contract management, e.g., grid connection contracts - Coordinating processes and carrying out on-site construction support measures - Developing retrofit concepts for conventional power plants, hydropower plants, and other installations

A company is looking for an experienced structural monitoring expert to ensure the safety of dam structures and verify the quality of measurement data. The project's goal is to optimize structural monitoring through professional data analysis, supplier coordination, and employee training. The expert will play a key role in reviewing and maintaining measurement data as well as coordinating ad-hoc investigations and inspections. They will also be responsible for expanding the measurement network and optimizing existing tools. Main tasks: - Professionally review structural monitoring measurement data (data quality, completeness, outliers) - Initiate and conduct ad-hoc investigations/inspections for suspicious measurements - Coordinate external suppliers for the replacement of defective or worn-out level sensors - Check individual maintenance intervals of measuring devices/systems and present results to the client - Coordinate suppliers to expand the measurement network by equipping it with electric sensors - Maintain measurement and control programs regarding measurement technology and inspection cycles - Provide necessary SAS structural information to internal and external stakeholders - Maintain and optimize the use of existing tools (Webviewer, DamCo, WISKI database) - Plan and conduct around 10 online trainings on the tools - Provide technical advice for special inspections of individual structures

A company is urgently looking for an experienced environmental engineer with proven expertise in environmental/ecological construction supervision and in preparing specifications for tenders (ideally according to VOB). The project's goal is to develop a detailed bill of quantities for the tender in Q4/2025 based on standards, including scope of services, cost forecast, qualification matrix, and contract input. The role includes the following main tasks: - Analyzing existing service specifications - Preparing a bill of quantities including quantities, items, and standards - Advising on procurement strategy, risks, and vendor qualification - Close coordination with the specialist department (remote)

A company is looking for an experienced project manager for the approval planning of infrastructure projects. - Management and coordination of the approval planning - Technical support and coordination of all involved service providers (routing, land management, environmental, communications) - Coordination of interfaces between departments and alignment with relevant stakeholders - Preparation of regular project reports and continuous updating of project documentation - Review and approval of deliverables from contracted service providers - Ensuring compliance with legal and technical requirements - Advising on the selection and hiring of specialist planners and experts - Independently creating scope of work documents and evaluating offers

A company is looking for an experienced technical project manager in the field of district heating. The project aims at planning and constructing district heating pipelines across all service phases of HOAI, as well as taking on complex project tasks. The project manager will play a key role in controlling and coordinating projects, working closely with engineering firms, municipalities, authorities and internal stakeholders. The role includes developing and optimizing planning options to maximize project efficiency and sustainability. In addition, the project manager will continuously improve technical planning guidelines and processes, conduct technical-economic analyses, develop scenarios, and create concepts. Another focus is on budgeting for network investments in the heat sector, in close coordination with central controlling, as well as carrying out network calculations. - Planning and construction of district heating pipelines across all HOAI service phases. - Managing and coordinating projects in cooperation with engineering firms, municipalities, authorities and internal stakeholders. - Developing and optimizing planning options to enhance efficiency and sustainability. - Supporting the improvement of technical planning guidelines and processes. - Conducting technical-economic analyses and developing scenarios and concepts. - Preparing the budget plan for network investments in the heating sector. - Performing network calculations.

A company is looking for an experienced site manager specializing in HVAC or piping systems in pharmaceutical or cleanroom environments. The project's goal is to supervise and lead the execution of construction tasks related to HVAC or piping systems in compliance with applicable industry standards and regulations. This role focuses solely on site management, without involvement in scheduling or project planning. Main tasks: - Supervising the installation and execution of HVAC or piping systems. - Ensuring compliance with pharmaceutical or cleanroom standards and regulations. - Coordinating with contractors and on-site teams. - Quality control and adherence to project specifications. - Providing technical expertise and on-site problem solving.

- Ensuring that access roads are built and prepared according to NKT specifications - Monitoring the proper construction of: - pay-off sites - launch pits - other relevant structures - Checking transport on the last mile to the pay-off site - Monitoring the cable pull at the pay-off site and at the launch pit - Collaborating with the civil engineering supervisor on: - backfilling launch pits - dismantling access roads and pay-off sites - ensuring compliant execution of joint pits according to NKT specifications - Monitoring the proper connection of joints - Monitoring the blowing in and splicing of fiber optic cables (FOC) - Coordinating with the civil engineering supervisor on backfilling the joint pits

A company is looking for an experienced Head of Electronic Development who will assume technical and disciplinary leadership of a hardware and software development team. The project's goal is to ensure the quality of technical deliverables, plan and carry out strategic pre-developments, and optimize existing processes and systems. The role includes working in agile project management, cost estimation and proposal creation, as well as team and capacity planning. The candidate will be responsible for the technical development of team members and will communicate closely with customers and suppliers. Key tasks: - Technical and disciplinary leadership of an HW+SW development team - Participation in agile project management, cost estimation and proposal creation, team and capacity planning - Technical development of team members - Responsibility for the quality of formal and technical deliverables - Calculation and pricing of products, especially PCBA - Planning and execution of strategic pre-developments - Communication with customers and suppliers - Optimization of existing processes and systems

A company is looking for an experienced planner for heating networks. The focus of the project is on planning, optimizing and implementing heating networks to ensure sustainable and efficient energy supply solutions. The exact job description is yet to be defined, but the planner will play a key role in the development and implementation of projects in the field of heat supply. Requirements: - Planning and design of heating networks - Analysis and optimization of existing systems - Preparation of technical documentation and reports - Collaboration with engineers, architects and other professionals - Ensuring compliance with regulations and standards

- Planning, procurement, implementation, and relocation of technical equipment and special installations at home and abroad - Collaborating with purchasing to select suitable suppliers for production equipment - Acting as interface between the business unit, development, and production - Supporting manufacturing during production (SOP + approx. 6 months) - Capacity planning (product-specific equipment) for new projects - Coordinating and conducting equipment and process approvals (FAT & SAT) - Assisting quality planners in creating a quality concept - Preparing specifications for the equipment to be procured and evaluating requirement specifications - Supporting the development of a packaging concept - Creating and maintaining subproject plans in coordination with all relevant departments for internal use - Assisting R&D in developing new, assembly-optimized products - Close cooperation with process development, special machine construction, application engineering assembly, quality engineers, application engineering injection molding, and industrial engineers in the business units - Supervising, supporting, and monitoring suppliers (internal & external) of production equipment - Aligning manufacturing concepts with operations - Contributing to process development and production planning - Participating in the creation of FMEAs - Taking on special tasks - Assisting in the preparation of the proposal concept

On behalf of a leading medical technology company, an experienced technical drafter or product designer is sought for creating and maintaining technical documentation and design drawings. - **Typical tasks:** - Create standard-compliant 2D manufacturing drawings and 3D models of parts and assemblies using CAD software. - Detail and dimension designs considering geometric and positional tolerances. - Prepare and manage bills of materials and technical documents in the PDM/PLM system (e.g. SAP ECTR). - Perform change services on existing drawings and documentation. - Work closely with the development and production departments to ensure manufacturability. - **Relevant technologies, tools or methods:** - CAD systems: Siemens NX, SolidWorks, CATIA V5, Autodesk Inventor (depending on customer system) - PDM/PLM systems: SAP ECTR, Teamcenter, Windchill - Standards: Solid knowledge of relevant ISO and DIN standards for technical drawings, especially in regulated environments. - ERP systems: SAP S/4HANA - **Typical KPIs or success metrics:** - On-time delivery of drawings and documents. - Error rate in technical documentation (number of required correction loops). - Compliance with internal and external design and documentation standards. - Efficiency in processing changes (turnaround time). - **Key challenges, risks or specifics:** - High demands on accuracy and completeness of documentation due to strict regulatory requirements in medical technology (MDR). - Traceability of changes (version control). - Complexity of parts to be designed (e.g. freeform surfaces, complex assemblies). - Close coordination with various stakeholders (development, purchasing, quality assurance, production). - **Concrete deliverables:** - Approval-ready 2D manufacturing drawings and 3D CAD models. - Complete and released bills of materials in the ERP system. - Updated technical product documentation. - Change logs. - **Lessons learned / best practices:** - A clear, standardized template management speeds up the creation process significantly. - Regular alignment meetings with production can prevent costly errors early on. - Careful maintenance of master data in the PDM/PLM system is the foundation for efficient collaboration.

A company is looking for an experienced project planner who is responsible for creating, updating, and adjusting project structure plans as well as integrating scheduling requirements from tenders and contracts. The goal is to monitor construction progress, assess risks, and ensure schedule adherence. The project planner will work closely with project management and other stakeholders to ensure smooth project execution. Main tasks: - Creating, updating, and adjusting the project structure plan and the overall project schedule. - Integrating scheduling requirements from tenders and contracts. - Tracking construction progress as well as changes and deliverables. - Performing earned value analyses (S-curve) and defining the “Value of Work Done”. - Preparing progress reports and schedule analyses. - Incorporating resource planning into the schedule. - Evaluating scheduling risks and advising risk management. - Conducting schedule risk analyses (SRA). - Coordinating interface milestones with project participants. - Delivering work results to meet scheduling requirements. - Preparing and reviewing schedule-related content in tender documents and contract drafts. - Evaluating and integrating schedules during the bidding phase. - Collecting and integrating regular schedule updates from contractors and suppliers. - Monitoring contract compliance based on construction progress and deadlines. - Ensuring the quality of schedules according to DCMA criteria. - Performing forensic analysis of construction delays according to SCL Delay & Disruption Protocols.