A company is looking for a specialist/consultant in the field of system testing development for special machine construction. The System Test and Qualification group conducts system tests in development projects, including tests of individual components, machine modules and software releases. Responsibilities also include defining and executing acceptance tests. The goal of the project is to support detailed planning of test tasks, creation and optimization of test case specifications and execution of integration and functional tests. Activities take place exclusively on site in the lab on machine systems. - Detailed planning of test tasks - Creation and optimization of test case specifications - Execution of integration and functional tests - Running test cases (black box, use case, fail case tests) - Documenting and preparing test results in the test management tool and MS Office - Error analysis and communication with developers (directly in the lab and via MS Teams) - Coordination with project management and the test manager

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact for electrical commissioning issues on-site, navigating complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary, ensuring clear communication with stakeholders. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: - If blame is justified → propose and implement a solution. - If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact on-site for electrical commissioning issues, reviewing complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary. Clear communication with stakeholders and independent client-side representation are key aspects of this role. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: If blame is justified → propose and implement a solution. If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

A company is seeking a skilled Embedded Linux Engineer to support the rollout and commissioning of new hardware modules at a leading technology manufacturer. The role involves hardware-related software development, device driver programming, and direct troubleshooting with hardware teams on-site. Typical project responsibilities: - Develop and adapt Linux device drivers for custom hardware modules - Kernel customization, system integration and performance optimization of Embedded Linux systems - Conduct unit and integration tests on target hardware - Work closely with hardware development for debugging and failure analysis - Document software architectures and implementations for internal knowledge transfer - Support the deployment of the modules in production environments Key technologies/tools/methodologies: - Embedded Linux (Yocto/Buildroot), C/C++, shell scripting - Debugging tools: JTAG, gdb, logic analyzers - Version control (Git), CI/CD for embedded projects KPIs/Success Metrics: - On-time commissioning of modules, system uptime/MTBF, error rate in field use, stability under resource constraints Special challenges/risks: - Hardware/software integration under time pressure, managing resource limitations on embedded devices Deliverables: - Ready-to-use hardware modules with tested Linux firmware - Complete project and code documentation, transfer of know-how to client teams Lessons Learned/Best Practices: - Intensive cross-team collaboration, early integration testing, automated regression testing and code reviews

A leading automotive supplier is looking for an experienced quality expert to inspect weld seams on safety-relevant body components. The project involves ensuring the highest quality standards through non-destructive testing methods. - Typical tasks: Independently plan, perform and evaluate non-destructive tests (NDT), especially visual testing (VT) and ultrasonic testing (UT). Create and manage test plans and work instructions. Detailed documentation of test results in CAQ systems. Analyze defect patterns and initiate corrective actions in close coordination with welding and production planning. Calibration and maintenance of test equipment. - Relevant technologies/tools: Ultrasonic testing devices, endoscopes, videoscopes, CAQ software (e.g. Babtec, QSYS), knowledge of standards DIN EN ISO 9712, ISO 5817, and relevant VDA volumes. - KPIs/success metrics: First Pass Yield (FPY) > 98%, reduction of internal defect rate (PPM), zero-error tolerance for safety-critical seams (escape rate = 0), on-time completion of test orders. - Key challenges: Assess complex seam geometries under time pressure. Clear interpretation of test results and distinguishing acceptable irregularities from critical defects. Enforcing quality standards with production. - Deliverables: Completed test reports, detailed failure analyses and reports, updated work and test instructions, contributions to FMEAs (failure mode and effects analysis). - Best practices: Regular team alignment (shopfloor management), continuous improvement of testing processes (CIP), raising awareness and training of production staff.

A company is looking for a specialist Construction Manager for Electrical Engineering and a specialist Construction Manager for Process Control (Siemens T3000) for a challenging project. The goal of the project is the technical monitoring and control of the process control interfaces of the existing plant during the integration of the new system, as well as ensuring quality and contractual compliance during the construction and commissioning phase. The role requires intensive coordination and oversight of planning interfaces due to the size of the project. The Construction Manager will work closely with control engineers, planners, experts, and contractors to ensure the successful delivery of the project. Main tasks: Professional monitoring of the process control interfaces of the existing plant during the integration of the new system Professional management of control engineers, planners, experts, and contractors - Preparation of specialized and project phase–dependent documents - Participation in project meetings and negotiations - Supervision of quality assurance and quality control during the construction and commissioning phase - Advice on process control commissioning - Technical coordination with design engineers on quality monitoring tasks - Monitoring contractual compliance and performing quality audits - Participation in safety meetings and implementation of measures to address identified issues

A company is seeking support for carrying out the engineering of energy generation and consumption plants and their connection to the transmission and/or distribution grids of network operators in Germany and abroad. The project includes both existing plants and those under development, such as power plants, consumer installations, and hybrid systems like battery installations. The goal is to plan, coordinate, and implement grid connections efficiently. Main tasks: - Managing approval processes for grid connections at the respective voltage level - Preparing technical documents for grid connection requests - Creating grid connection applications, including technical documentation for network operators - Technical engineering for grid connection concepts - Designing extra-high, high, and medium-voltage switchgear and substations - Basic and detailed engineering, including tender documents and specifications - Developing technical standards to implement quality requirements - Control and coordination tasks within project execution - Consulting and coordination for quality assurance measures - Project management in line with technical regulations and project management strategies - Advice on contract management, e.g., grid connection contracts - Coordinating processes and carrying out on-site construction support measures - Developing retrofit concepts for conventional power plants, hydropower plants, and other installations

Building and evolving a test automation suite for the core applications of a large insurer to increase release speed and quality. - **Typical tasks:** - Analysis of test processes and identification of automation potential. - Selection, configuration and implementation of automation frameworks. - Development and maintenance of automated test scripts. - Integration of tests into CI/CD pipelines (Jenkins, GitLab). - Test data management and reporting. - **Relevant technologies, tools & methods:** - Selenium, Cypress, Playwright, Tosca, Postman. - Java, Python, JavaScript. - TestNG, JUnit, Cucumber. - Jenkins, GitLab CI, Docker, Jira. - **Typical KPIs & success metrics:** - Automation rate (>70%), reduction of test run time, defect detection rate. - **Key challenges & risks:** - Complex legacy UIs, stable test data management, script maintainability. - **Deliverables:** - Documented test automation framework, automated test suite, CI/CD integration, test reports.

An EPC consultant is looking for an experienced site manager (mechanical) to oversee a biogas plant project. The goal of the project is to supervise construction and ensure mechanical work meets the project requirements. In this role, you will be responsible for on-site construction supervision and coordinate the mechanical work. You will work closely with other project stakeholders to ensure schedules, quality standards, and safety regulations are met. - Supervising mechanical construction work at the biogas plant - Ensuring adherence to schedules and quality standards - Coordinating subcontractors and suppliers - Conducting regular site inspections and reporting - Assisting in solving technical challenges on site - Complying with safety regulations and environmental standards

We are looking for a freelance electrical engineer specializing in high and extra-high voltage as a primary planner (m/f/d) to support energy infrastructure projects. The projects include grid connection of generation plants (especially wind and solar farms) as well as new construction and modification of substations. - Typical responsibilities in this role:** - Developing primary engineering concepts and layouts for air- and gas-insulated high and extra-high voltage switchgear (AIS/GIS) from 110 kV to 380 kV. - Designing and sizing primary equipment (circuit breakers, disconnectors, instrument transformers, transformers, etc.). - Creating single-line diagrams, electrical schematics, and arrangement drawings. - Performing short-circuit and load flow calculations, and sizing grounding systems and lightning protection. - Conducting technical clarifications and coordination with clients, grid operators, authorities, and suppliers. - Preparing technical specifications and tender documents for primary equipment. - Coordinating with other disciplines such as secondary systems, civil engineering, and control systems. - Supporting commissioning and acceptance of the equipment. - Relevant technologies, tools, or methods:** - Planning software: AutoCAD, Primtech, REVIT, EPLAN. - Calculation tools: PowerFactory (DIgSILENT), NEPLAN, or vendor-specific tools. - Standards & regulations: VDE-AR-N 4120 (High Voltage Technical Connection Conditions), IEC standards, EN standards. - Project management tools: MS Project, Jira. - BIM (Building Information Modeling) in plant engineering. - Typical KPIs or success metrics:** - Planning quality: Number of required plan changes after approval < 5%. - Schedule adherence: Meeting planning milestones according to the overall project schedule. - Cost efficiency: Staying within the budget for the planned primary equipment. - Technical compliance: Successful acceptance of the equipment by the grid operator without primary equipment issues. - Interface management: Smooth coordination, measured by the number of delays in other disciplines caused by planning errors. - Key challenges, risks, or specifics:** - High complexity and safety requirements in the high and extra-high voltage range. - Need for exact compliance with the grid connection rules (TAR) of the respective grid operators. - Long delivery times and price fluctuations for large primary equipment. - Coordination in tight spaces, especially during refurbishment of existing facilities. - Increasing demands from integrating renewable energies (e.g., reactive power management, FRT behavior). - Ensuring physical safety and occupational health in the planning process. - Specific deliverables:** - Approval-ready primary technical planning documents (layouts, elevations, sections). - Final single-line diagrams and overview circuit diagrams. - Technical calculation reports (e.g., short-circuit withstand, grounding). - Prepared bill of quantities and technical specifications for procurement. - Minutes of technical coordination meetings. - Revision documents and as-built documentation.

For the enhancement of a complex ServiceNow platform, we are looking for a developer specialized in the middlelayer. The focus is on implementing business logic, integrations, and processing data between the frontend and backend systems. - **Typical tasks include:** - Designing and developing server-side business logic in ServiceNow using Business Rules, Script Includes, and Workflows. - Designing, implementing, and maintaining REST- and SOAP-based integrations to third-party systems (e.g., SAP, Jira, HR systems) via IntegrationHub or custom scripts. - Developing and optimizing data flows and transformations within the platform. - Analyzing and optimizing performance of server-side scripts and database interactions. - Ensuring platform stability and security through robust, error-resistant coding. - **Relevant technologies, tools, or methods:** - ServiceNow platform: in-depth knowledge of the Glide API (GlideRecord, GlideSystem), server-side scripting (JavaScript ES5). - Integrations: IntegrationHub (Spokes), REST/SOAP API Explorer, JSON, XML. - Automation: Flow Designer, Workflow Editor. - Development tools: ServiceNow Studio, VS Code with ServiceNow plugins. - Methodology: Agile (Scrum), use of Update Sets and Application Scopes for deployment. - **Typical KPIs or success metrics:** - Transaction response times for critical middlelayer processes. - Error rate in API calls and integrations (< 1%). - Success rate of automated workflows. - Code complexity (e.g., measured via SonarQube integration). - Adoption rate of new features enabled by the middlelayer. - **Key challenges, risks, or specifics:** - Complexity of dependencies between different ServiceNow modules and external systems. - Ensuring scalability under high transaction volumes. - Debugging asynchronous processes and integrations. - Following ServiceNow best practices to maintain upgradeability of the platform ("out-of-the-box" vs. customizing). - **Concrete deliverables:** - Implemented and tested Script Includes and Business Rules. - Fully configured and documented integrations in IntegrationHub. - Technical documentation of the developed logic and data flows. - Completed Update Sets ready for production deployment. - **Lessons learned/best practices:** - Encapsulate reusable logic in Script Includes instead of duplicating it across multiple Business Rules. - Prefer asynchronous Business Rules for long-running operations to avoid blocking the user experience. - Use Flow Designer over the classic Workflow Editor for new automations.

A company is looking for an experienced network and project manager with expertise in connecting devices and their interfaces, as well as solid knowledge of modern networking technologies. The goal of the project is to optimize and develop network solutions, especially in enterprise WLAN and RADIUS/EAP-TLS. The candidate will play a key role in project and team management, preferably in an agile environment, and ensure cross-team coordination. - Develop and implement solutions for connecting devices and their interfaces (HTTP/REST) - Optimize and manage enterprise WLAN/RADIUS/EAP-TLS networks - Lead and manage projects and teams, preferably in an agile environment - Coordinate among different teams and stakeholders - Apply and advance modern networking technologies such as IEEE 802.11/WiFi

A company is looking for an experienced site manager with switching authorization for 110 kV and 220 kV systems, specializing in substations. The project’s goal is to oversee and manage construction work related to high-voltage substations, ensuring safety standards and project schedules are met. The role includes leading on-site teams, coordinating with stakeholders, and ensuring the proper execution of electrical switching operations. Main tasks: - Oversee construction work at substations. - Ensure compliance with safety regulations and standards. - Coordinate with project teams and external stakeholders. - Perform electrical switching operations on 110 kV and 220 kV systems. - Manage project schedules and delivery deadlines. - Conduct quality checks and ensure proper documentation.

Design and build a modern data platform in the Azure Cloud for an e-commerce company. Implement scalable data pipelines and a lakehouse architecture. - **Typical responsibilities:** - Designing and implementing ETL/ELT processes with Azure Data Factory/Databricks. - Building and managing the data infrastructure (Data Lake, Synapse). - Developing data models and ensuring data quality. - Automating deployments using IaC (Terraform). - Performance tuning and coordinating with stakeholders. - **Relevant technologies, tools & methods:** - Azure Data Factory, Synapse, Databricks, Data Lake Storage. - Apache Spark, Delta Lake. - Python (PySpark), SQL. - Terraform, Azure DevOps. - **Typical KPIs & success metrics:** - Data latency, pipeline uptime (>99.9%), query performance, cost efficiency. - **Key challenges & risks:** - High data volumes, GDPR compliance, avoiding data silos. - **Deliverables:** - Production-ready data pipelines, structured data lake/warehouse, IaC scripts, technical documentation.

- Construction management for the installation of electrotechnical systems in the context of a grid connection project - Ensuring compliance with budget, schedule and quality goals as well as all relevant legal regulations - Reviewing technical documents such as construction drawings, material lists and performance records - Coordinating and communicating with subcontractors, suppliers and project stakeholders - Managing interfaces and ensuring a smooth project flow

For an internationally active special machine manufacturer, we are looking for an experienced PLC programmer to implement challenging automation projects. The focus is on new programming and commissioning of control systems. - Typical tasks: development, testing and documentation of PLC software for new plants using Siemens SIMATIC S7 (TIA Portal) and/or CODESYS V3. Creation and adaptation of HMI visualizations (e.g. with WinCC Unified, TwinCAT HMI). Commissioning machines and plants on-site (including I/O checks, configuration of fieldbus systems like Profinet/EtherCAT, functional tests). Systematic error analysis and optimization of existing plants. Technical support for customer service. - Relevant technologies/tools: Siemens TIA Portal, SIMATIC S7-1500, CODESYS V3, Beckhoff TwinCAT, WinCC, various fieldbus configurators, EPLAN P8 (reading circuit diagrams). - KPIs/success metrics: adherence to development and commissioning schedules, reduction of commissioning time through high software quality, machine cycle time and availability (OEE), customer satisfaction after commissioning. - Special challenges: integration of hardware and software components from different manufacturers. Working under time pressure during on-site commissioning. Ensuring functional machine safety (safety PLC) according to standards (e.g. ISO 13849-1). - Deliverables: operational, fully documented PLC programs, final HMI projects, signed commissioning and acceptance protocols, creation or addition of operating manuals. - Best practices: structured programming according to standards (e.g. IEC 61131-3), modular and reusable software blocks, consistent versioning of code (e.g. in Git).

- Operational control and management of material requirement planning and provisioning, as well as maintenance of material master data for an efficient material flow - Ensuring and monitoring the operational material flow and proactively initiating measures in case of deviations, in close coordination with suppliers and internal stakeholders - Optimizing inventory levels in terms of tied-up capital costs, material coverage, and demand fulfillment - Contributing to the further development of processes and organization of the Material Management department

- Development and enhancement of data management in SQL Server for fixed network and all-IP products, and integration of existing and new data sources from SQL Server/Oracle from CRM systems and workflow management systems - Building a database in SQL that collects and consolidates data from different source systems (CRM and workflow systems) - Creating and extending database analyses in Tableau for daily reporting - Advising business units (e.g., Technology, Order Management) on data collection and customer data management - Continuous optimization and establishment of the data management process and data quality for future projects

We are looking for an experienced IT project manager to lead and execute IT projects in a hospital setting. The goal is to deliver various digitalization and infrastructure projects (e.g. HIS migration, medical technology integration, ISMS implementation or TI components) on time, within budget and with assured quality. In this role, the project manager takes full responsibility for planning, managing and executing the projects and acts as the link between IT, departments and management. - Overall responsibility for planning, managing and executing IT projects in a clinical environment - Coordination of internal and external stakeholders, including IT department, medical staff, service providers and manufacturers - Ensuring adherence to time, budget and quality requirements - Preparing project plans, status reports, decision documents and presentations - Risk management, resource planning and escalation handling - Managing acceptance and testing procedures, including documentation - Supporting preparation for KHZG or NIS2 related measures - Acting as interface between IT, departments and management

A company is seeking support in setting up or optimizing a structured funding controlling system for municipal energy, infrastructure, or digitization projects. The goal is to increase efficiency and transparency in the use of funding and ensure compliance with funding regulations. The role includes identifying suitable funding programs at the EU, federal, and state levels, assisting with applications, fund disbursements, and preparation of usage reports. It also involves setting up a monitoring and reporting system (e.g., in Excel) that aligns project plans with funding requirements. Consulting on processes and interfaces such as accounting and project management, as well as training internal teams as needed, are also part of the tasks. - Identification of suitable funding programs (EU, federal, state) - Support with application, fund disbursement, and usage reports - Setting up monitoring/reporting (e.g., in Excel) - Aligning project plans with funding requirements - Consulting on processes and interfaces (e.g., accounting, project management) - Training internal teams as needed