Typical tasks: - Analyze existing insurance processes and identify digitalization potentials - Gather and document business requirements together with business units - Create solution concepts for digital transformation (including process modeling and cost-benefit analyses) - Act as liaison between business and IT: translate requirements into technical concepts and support implementation - Support project management in planning and implementing new digital solutions (agile methods like Scrum/Kanban) Relevant tools & technologies: BPMN modeling tools (e.g. Visio, Signavio), requirements management (Jira, Confluence), knowledge of common insurance IT systems, MS Office KPIs & metrics: adherence to project milestones and budgets, reduction of process cycle times, increase in customer satisfaction/user acceptance, reduction of manual efforts through automation Challenges: aligning diverse stakeholders in the insurance environment (business units, IT, regulatory), integrating new digital solutions into existing legacy systems, dealing with regulatory requirements and data protection, change management and user adoption Deliverables: comprehensive requirement documents and process models, developed business concepts and user stories for IT implementation, defined implementation roadmap, training materials for updated processes Lessons learned: early involvement of all stakeholders facilitates the implementation of digitalization projects; iterative, agile approaches allow flexible adjustments; deep industry knowledge (products, regulations) is crucial to design viable digital solutions

The ProMi Squad (Process Mining) project aims to transparently map the entire order process in the portals area. Relevant data sources from order to activation are combined for this. A holistic view of the end-to-end process makes it possible to identify process deviations and optimization potential. Key milestones of the project are connecting the required data sources, building self-service reports, and implementing automated alerts for process deviations. The challenge lies in the technical and functional integration of heterogeneous systems and data flows to ensure consistent monitoring and control of the ordering process. ⸻ Service Description - Analysis and documentation of requirements in the omnichannel area using requirements management tools and structured elicitation methods - Functional and technical analysis of existing data sources and ETL processes using database tools - Capturing and evaluating existing interfaces between source and target systems based on technical documentation - Consulting on the technical integration of defined data sources into the Celonis environment, taking into account the used tools Celonis EMS, Data Pool, and Data Push API - Creating technical queries and visualizations for process mapping based on the platform features provided (Celonis PQL, Studio) - Using system functions to visualize and analyze existing business processes (via the Celonis Process Explorer) - Functional consulting on technical interfaces, data provisioning, and system prerequisites

- Establishment of a future O2C standard process in S/4 HANA for a retail customer with a focus on O2C integration and planned handling of the merchandise management system - The existing merchandise management system for trade goods will still be used for all logistics processes and is out of scope. - Requirements definition for interfaces - Process definition and harmonization: Establish company-wide standard processes in S/4 and in O2C process integration for the areas/entities involved (B2C, B2B, B2G) - O2C integration: Definition of the level of integration of third-party systems: - Best possible compliance with legal reporting and documentation obligations - S/4 as the leading system for executing intercompany transactions - Billing flow and invoicing - Price conditions - Rebates - Contracts What should be done for these topics during the Explore phase? - Preparation and facilitation of Fit To Standard workshops (including building a prototype in the sandbox system for the workshops) - Documentation of the results of the Fit To Standard workshops in a BPML up to level 5 - Documentation of gaps/requirements - Process design and documentation of functional concepts (Confluence + Signavio)

A company is seeking support for a project aimed at transparently mapping the overall ordering process in the Portals area. The goal is to combine relevant data sources from order to activation to enable a holistic view of the end-to-end process. This should facilitate the identification of process deviations and optimization potentials. Key project milestones include connecting the required data sources, building self-service reports, and implementing automated alerts for deviations in the process flow. The challenge lies in the technical and professional integration of heterogeneous systems and data flows to ensure consistent monitoring and control of the ordering process. - Analysis and documentation of requirements in the Omnichannel area using requirements management tools and structured collection methods - Professional and technical analysis of existing data sources and ETL processes using database tools - Recording and evaluation of existing interfaces between source and target systems based on technical documentation - Consulting on technical integration of defined data sources into the Celonis environment considering the tools used (Celonis EMS, Data Pool and Data Push API) - Creation of technical queries and representations for process visualization based on provided platform functions (Celonis PQL, Studio) - Use of system-side functions for visualization and analysis of existing business processes (via Celonis Process Explorer) - Professional consulting on technical interfaces, data provision and systemic requirements

We are looking for an experienced consultant for a process and project initiative in the area of Asset P&L (Profit and Loss) at a leading international financial services provider. - Typical areas of responsibility in this role:** - Analyze and document existing end-to-end P&L processes for various asset classes (e.g. equities, fixed income, derivatives). - Identify weaknesses, risks and inefficiencies in data collection, processing and reporting. - Design and conceptualize optimized target processes for P&L calculation and attribution. - Create functional specifications and business requirements for adapting or introducing IT systems (e.g. P&L engines, data warehouses). - Manage the implementation of new processes and tools, including milestone planning, stakeholder management and test coordination. - Develop control mechanisms to ensure data quality and consistency. - Prepare training materials and conduct workshops for business areas (trading, controlling, risk). - Relevant technologies, tools or methods:** - Advanced Analytics: MS Excel (Pivot, Power Query, VBA), SQL. - Business Intelligence: Tableau, Power BI, Qlik. - Project Management: Jira, Confluence, MS Project. - ERP/Finance Systems: SAP FI/CO, Oracle Financials, or industry-specific asset management platforms. - Methods: Business Process Model and Notation (BPMN 2.0), agile project management (Scrum/Kanban). - Typical KPIs or success metrics:** - Reduction in P&L creation time (cycle time): target >25% efficiency improvement. - Decrease in manual correction entries: target >50% reduction through process automation. - Data quality index: increase "first-time-right" rate in data intake to >99%. - Efficiency ratio (cost-to-income): demonstrate a positive contribution to lowering the ratio. - User adoption rate: acceptance of new processes/tools in the business area >80% after 3 months. - Key challenges, risks or specifics:** - Heterogeneous system landscapes and inconsistent data sources (data silos). - High complexity of financial products and valuation models. - Resistance to process changes in business areas (change management). - Ensuring compliance with regulatory requirements (e.g. IFRS 9, BCBS 239). - Time- and budget-critical implementation during ongoing operations. - Concrete deliverables:** - Milestone 1: Completed as-is analysis and process documentation. - Deliverable 1: Detailed analysis report including risk assessment. - Milestone 2: Finalized target concept and business requirements document. - Deliverable 2: Implementation roadmap and project plan. - Milestone 3: Successful user acceptance test (UAT) of the new process/tool. - Deliverable 3: Acceptance protocols, training materials and project closure report.

- IT project manager activities - Interface/bridging role between business area and technology, requiring solid subject matter knowledge.

- Execution and handling of switching processes (supplier change, new setup, move-in/move-out) - Independent handling of clarification cases with analysis of rejection reasons and follow-up - Support in market communication and related areas (e.g., meter reading, billing) at least at 2nd-level - Ensuring smooth processes within energy industry workflows

For a project in the power plant environment, a freelance specialist is urgently needed for the migration and adaptation of the ABB 800xA control system. - Typical tasks in this role:** - Implementation of programming and commissioning with the ABB 800xA process control system. - Migration of existing control system logic to the new system version, including adaptation of controllers and I/O modules. - Creation and adjustment of process graphics, user interfaces and alarm management configurations. - Performing system tests, error analysis and performance optimizations to ensure plant availability and controllability. - Technical support for operational staff during commissioning and ramp-up phases. - Creation and maintenance of technical documentation (functional diagrams, configuration descriptions, test protocols). - Close collaboration with process engineering, electrical engineering and the plant operator. - Relevant technologies, tools or methods:** - Control system: ABB Ability™ System 800xA (including AC 800M controller, Information Management, Batch Control). - Engineering tools: Control Builder M, Process Graphics Migration Tool, Bulk Data Manager. - Fieldbuses: PROFIBUS, Foundation Fieldbus, Modbus. - Virtualization: VMware, Hyper-V for test and development environments. - Databases: Knowledge of SQL for analyzing historical data (e.g., 800xA History). - Familiarity with relevant standards for process and power plant engineering (e.g., IEC 61508, IEC 61511). - Typical KPIs or success metrics:** - Migration speed: Number of migrated system components/functions per week/month. - System availability: Control system uptime after migration > 99.9%. - Commissioning error rate: Number of critical software bugs after go-live < 5. - Test coverage: Percentage of successfully executed and documented test cases > 95%. - Adherence to project schedule: Completion of migration and commissioning by the defined deadline. - Operator acceptance: Positive feedback from operational staff on the new system environment. - Special challenges, risks or specifics:** - Migration during ongoing operation ("brownfield") with minimal downtime. - Ensuring compatibility between old and new system components (hardware/software). - High complexity of process logic in power plants (e.g., boiler control, turbine regulation). - Risk of cybersecurity vulnerabilities in networked control systems (e.g., CVEs for 800xA). - Management of interfaces to third-party systems (e.g., MES, ERP). - Need for intensive and precise collaboration between control technology, process engineering and operations. - Concrete deliverables:** - Migrated and operational control logic on the target system. - Fully tested and customer-approved process graphics and user interfaces. - Acceptance protocols for Factory Acceptance Test (FAT) and Site Acceptance Test (SAT). - Updated technical plant documentation. - Final migration report with lessons learned. - Trained operational staff.

An EPC consultant is looking for an experienced Site Manager (Mechanical) to handle a biogas plant project. The goal is to oversee the construction and ensure all mechanical work meets the project requirements. In this role, you will be responsible for monitoring construction and coordinating mechanical work on site. You will work closely with other project stakeholders to ensure schedules, quality standards, and safety regulations are met. - Supervise mechanical construction work at the biogas plant - Ensure compliance with schedules and quality standards - Coordinate subcontractors and suppliers - Conduct regular site inspections and report findings - Assist in resolving technical challenges on site - Adhere to safety regulations and environmental standards

- Ensure that access roads are built and prepared according to NKT guidelines - Monitor the proper construction of: - cable pay-off areas - thrust pits - other relevant structures - Oversee last-mile transport to the cable pay-off site - Monitor cable pulling at the pay-off site and in the thrust pit - Collaborate with the civil works supervisor on: - backfilling of thrust pits - dismantling of access roads and pay-off sites - ensuring that splice pits are constructed according to standards and NKT guidelines - Monitor the proper connection of the splices - Monitor the blowing-in and joining of the fiber optic cables (FOC) - Coordinate with the civil works supervisor on the backfilling of splice pits

A company is looking for an experienced expert in P2P / Purchase to Pay / Procure to Pay to merge the IT finance systems of two entities. The goal of the project is to ensure smooth system integration and optimize processes. In this role, the expert will work closely with relevant stakeholders to analyze requirements, develop solutions, and support the implementation. Main tasks: - Analyze the current IT finance systems of both entities - Develop a strategy for system consolidation - Optimize P2P processes - Support implementation and integration - Collaborate with internal teams and external partners - Ensure compliance with finance and regulatory guidelines

A company is looking for an experienced MES consultant specializing in MPDV’s Hydra X to support the system’s expansion to additional sites. The system is already rolled out at one location and should now be scaled further. The role includes supporting the introduction of new features or system versions, implementing system customizations and optimizations based on production requirements, and overseeing the rollout. The consultant will work closely with internal teams and external service providers to ensure quick identification and resolution of MES system issues. - Support the introduction of new system features or versions - Implement system customizations and optimizations based on production requirements - Assist with the rollout to additional sites - Quickly identify and resolve issues in the MES system

For a public client's project, a civil engineer (m/f/d) is being sought to represent the client. The project includes the development and rehabilitation of roads, sidewalks, street lighting and bus stops. - Typical responsibilities in this role:** - Assuming the non-delegable client tasks according to the AHO series, including defining objectives, budget responsibility and making key decisions. - Managing and coordinating external planning offices, experts and construction companies. - Ensuring compliance with procurement law (VOB/VgV), building regulations and relevant technical standards (e.g. DIN, ZTV). - Performing cost and schedule control as well as risk management across all project phases (according to HOAI). - Quality assurance on site, organizing construction meetings and conducting inspections. - Reviewing change order claims and invoices. - Regular reporting to the office management and political committees; ensuring transparency and traceable documentation. - Relevant technologies, tools or methods:** - CAD/BIM software: Autodesk Civil 3D, Revit, AutoCAD. - Tendering, awarding, billing (AVA): RIB iTWO, ORCA AVA. - Project management & control: MS Project, Projektron BCS, Asana. - Construction management & documentation: PlanRadar, Capmo. - Solid knowledge of VOB/B, VOB/C and HOAI. - Typical KPIs or success metrics:** - Budget adherence: deviation from the approved budget < 10%. - Schedule adherence: meeting milestones (planning completion, start of construction, completion) with < 5% delay. - Quality: low defect rate at final inspection (< 5% of trades with major defects). - Citizen satisfaction: minimal number of substantiated citizen complaints during construction. - Legal compliance: number of successfully defended change order claims or legal disputes. - Key challenges, risks or specifics:** - Dealing with unforeseen ground conditions and contaminated sites. - Complex and lengthy approval processes with various public authorities. - Strict budget constraints and political pressure in case of cost overruns. - Managing resident interests and public communication. - Challenges due to skilled labor shortages and supply bottlenecks in the construction industry. - Concrete deliverables:** - Completed and approved design and execution planning. - Successfully conducted tendering process with signed construction contracts. - Documented construction inspections according to VOB. - Final project documentation and audited final invoices. - Final report for executive management and political committees.

A company is looking for an experienced construction supervisor or manager in the fiber optics field to technically oversee and monitor a general contractor’s construction work in FTTH broadband rollout. The goal is to ensure that the construction work follows the execution planning requirements and that the FTTH broadband network is fully deployed. The sites are located near Würzburg and Saarbrücken. The role includes monitoring adherence to schedules, safety regulations, and the quality of construction work, as well as coordinating and documenting construction activities. The manager will independently prepare a construction log and overall documentation, track external services, and verify the accuracy of planning and construction documents. - Technical oversight and monitoring of a general contractor’s construction work in FTTH broadband rollout. - Ensuring compliance with schedules, safety regulations, and quality standards for construction work. - Recording and reviewing planning and construction documents of subcontractors. - Independently preparing a construction log and comprehensive documentation. - Tracking deadlines, inspecting, and documenting ordered services and deliveries. - On-site supervision and safety checks according to the HSE concept.

A company is looking for an experienced technical project manager in the field of district heating. The aim of the project is to plan and construct district heating pipelines across all HOAI service phases and to take on complex project tasks. The project manager will play a key role in controlling and coordinating projects, working closely with engineering firms, municipalities, authorities and internal stakeholders. The role includes developing and optimizing planning variants to maximize project efficiency and sustainability. In addition, the project manager will continuously improve technical planning guidelines and processes, conduct technical-economic analyses, develop scenarios and create concepts. Another focus is on budget planning for network investments in the heating sector, in close coordination with central controlling, as well as performing network calculations. - Planning and construction of district heating pipelines across all HOAI service phases. - Controlling and coordinating projects in collaboration with engineering firms, municipalities, authorities and internal stakeholders. - Developing and optimizing planning variants to increase efficiency and sustainability. - Supporting the improvement of technical planning guidelines and processes. - Conducting technical-economic analyses and developing scenarios and concepts. - Creating budget plans for network investments in the heating sector. - Performing network calculations.

A company is looking for a Siemens PLC Programmer to support a hybrid setup in Siegen. The project focuses on programming and optimizing Siemens PLC systems, particularly within the steel industry. The role requires expertise in S120 and G120 servo drives. The ideal candidate should live close to Siegen to facilitate on-site work when required. Key responsibilities: - Programming and optimizing Siemens PLC systems. - Working with S120 and G120 servo drives. - Collaborating with the team to ensure smooth operations in a hybrid setup. - Troubleshooting and resolving technical issues. - Ensuring compliance with industry standards and safety regulations.

A company is looking for a specialist construction manager in electrical engineering and a specialist construction manager in process control (Siemens T3000) for a challenging project. The goal of the project is the technical monitoring and management of the process control interfaces of the existing plant during the integration of the new system, and to ensure quality and contractual compliance during the construction and commissioning phases. The role requires intensive coordination and oversight of interfaces with construction planning due to the size of the project. The construction manager will work closely with process control engineers, planners, experts, and contractors to ensure successful project implementation. Main responsibilities: - Technical monitoring of the process control interfaces of the existing plant during the integration of the new system - Technical management of process control engineers, planners, experts, and contractors - Preparation of specialized and project-phase specific documents - Participation in project meetings and negotiations - Technical management of quality assurance and quality control during the construction and commissioning phases - Advising on process control commissioning - Technical coordination with design engineers on quality monitoring tasks - Monitoring contractual compliance and conducting quality inspections - Participation in safety meetings and implementation of measures to address identified deficiencies

- Construction management for the installation of electrical systems in the context of a grid connection project - Ensuring adherence to budget, time and quality goals as well as all relevant legal regulations - Reviewing technical documents such as construction plans, material lists and performance records - Coordination and communication with subcontractors, suppliers and project stakeholders - Interface management and ensuring a smooth project workflow

A company is looking for an experienced engineering expert in sterile filling to support a challenging project in pharmaceutical production. The goal of the project is to optimize the efficiency and quality of filling processes and ensure that all regulatory requirements are met. In this role, the expert will work closely with the internal team to develop technical solutions, analyze existing processes, and implement improvements. Main tasks: - Analyze and optimize processes in sterile filling - Ensure compliance with GMP and other regulatory requirements - Develop and implement technical solutions for process improvement - Collaborate with interdisciplinary teams - Document and report progress and results

Management of a strategic digitization project in a hospital network, e.g. implementing a new HIS or a patient record (ePA) according to KHZG. - **Typical responsibilities:** - Overall responsibility for project planning, control, and monitoring (time, budget, quality). - Management of the interdisciplinary project team. - Requirements, risk, and stakeholder management. - Planning and management of change management and rollouts. - Ensuring compliance with regulatory requirements (KHZG, GDPR). - **Relevant technologies, tools & methods:** - HIS systems (Orbis, iMedOne), ePA solutions. - Standards: HL7, FHIR. - Methods: PRINCE2, PMI/PMBOK, agile/hybrid. - Tools: MS Project, Jira, Confluence. - **Typical KPIs & success metrics:** - KHZG compliance, user adoption rate (>85%), process efficiency, milestone adherence. - **Key challenges & risks:** - High process complexity, intense stakeholder management, interoperability, data security. - **Deliverables:** - Project plan, status reports, requirements specification, change concept, cutover plan, project closure report.