Typical tasks: - Analyze existing insurance processes and identify digitalization potentials - Gather and document business requirements together with business units - Create solution concepts for digital transformation (including process modeling and cost-benefit analyses) - Act as liaison between business and IT: translate requirements into technical concepts and support implementation - Support project management in planning and implementing new digital solutions (agile methods like Scrum/Kanban) Relevant tools & technologies: BPMN modeling tools (e.g. Visio, Signavio), requirements management (Jira, Confluence), knowledge of common insurance IT systems, MS Office KPIs & metrics: adherence to project milestones and budgets, reduction of process cycle times, increase in customer satisfaction/user acceptance, reduction of manual efforts through automation Challenges: aligning diverse stakeholders in the insurance environment (business units, IT, regulatory), integrating new digital solutions into existing legacy systems, dealing with regulatory requirements and data protection, change management and user adoption Deliverables: comprehensive requirement documents and process models, developed business concepts and user stories for IT implementation, defined implementation roadmap, training materials for updated processes Lessons learned: early involvement of all stakeholders facilitates the implementation of digitalization projects; iterative, agile approaches allow flexible adjustments; deep industry knowledge (products, regulations) is crucial to design viable digital solutions

The ProMi Squad (Process Mining) project aims to transparently map the entire order process in the portals area. Relevant data sources from order to activation are combined for this. A holistic view of the end-to-end process makes it possible to identify process deviations and optimization potential. Key milestones of the project are connecting the required data sources, building self-service reports, and implementing automated alerts for process deviations. The challenge lies in the technical and functional integration of heterogeneous systems and data flows to ensure consistent monitoring and control of the ordering process. ⸻ Service Description - Analysis and documentation of requirements in the omnichannel area using requirements management tools and structured elicitation methods - Functional and technical analysis of existing data sources and ETL processes using database tools - Capturing and evaluating existing interfaces between source and target systems based on technical documentation - Consulting on the technical integration of defined data sources into the Celonis environment, taking into account the used tools Celonis EMS, Data Pool, and Data Push API - Creating technical queries and visualizations for process mapping based on the platform features provided (Celonis PQL, Studio) - Using system functions to visualize and analyze existing business processes (via the Celonis Process Explorer) - Functional consulting on technical interfaces, data provisioning, and system prerequisites

- Establishment of a future O2C standard process in S/4 HANA for a retail customer with a focus on O2C integration and planned handling of the merchandise management system - The existing merchandise management system for trade goods will still be used for all logistics processes and is out of scope. - Requirements definition for interfaces - Process definition and harmonization: Establish company-wide standard processes in S/4 and in O2C process integration for the areas/entities involved (B2C, B2B, B2G) - O2C integration: Definition of the level of integration of third-party systems: - Best possible compliance with legal reporting and documentation obligations - S/4 as the leading system for executing intercompany transactions - Billing flow and invoicing - Price conditions - Rebates - Contracts What should be done for these topics during the Explore phase? - Preparation and facilitation of Fit To Standard workshops (including building a prototype in the sandbox system for the workshops) - Documentation of the results of the Fit To Standard workshops in a BPML up to level 5 - Documentation of gaps/requirements - Process design and documentation of functional concepts (Confluence + Signavio)

We are looking for an experienced consultant for a process and project initiative in the area of Asset P&L (Profit and Loss) at a leading international financial services provider. - Typical areas of responsibility in this role:** - Analyze and document existing end-to-end P&L processes for various asset classes (e.g. equities, fixed income, derivatives). - Identify weaknesses, risks and inefficiencies in data collection, processing and reporting. - Design and conceptualize optimized target processes for P&L calculation and attribution. - Create functional specifications and business requirements for adapting or introducing IT systems (e.g. P&L engines, data warehouses). - Manage the implementation of new processes and tools, including milestone planning, stakeholder management and test coordination. - Develop control mechanisms to ensure data quality and consistency. - Prepare training materials and conduct workshops for business areas (trading, controlling, risk). - Relevant technologies, tools or methods:** - Advanced Analytics: MS Excel (Pivot, Power Query, VBA), SQL. - Business Intelligence: Tableau, Power BI, Qlik. - Project Management: Jira, Confluence, MS Project. - ERP/Finance Systems: SAP FI/CO, Oracle Financials, or industry-specific asset management platforms. - Methods: Business Process Model and Notation (BPMN 2.0), agile project management (Scrum/Kanban). - Typical KPIs or success metrics:** - Reduction in P&L creation time (cycle time): target >25% efficiency improvement. - Decrease in manual correction entries: target >50% reduction through process automation. - Data quality index: increase "first-time-right" rate in data intake to >99%. - Efficiency ratio (cost-to-income): demonstrate a positive contribution to lowering the ratio. - User adoption rate: acceptance of new processes/tools in the business area >80% after 3 months. - Key challenges, risks or specifics:** - Heterogeneous system landscapes and inconsistent data sources (data silos). - High complexity of financial products and valuation models. - Resistance to process changes in business areas (change management). - Ensuring compliance with regulatory requirements (e.g. IFRS 9, BCBS 239). - Time- and budget-critical implementation during ongoing operations. - Concrete deliverables:** - Milestone 1: Completed as-is analysis and process documentation. - Deliverable 1: Detailed analysis report including risk assessment. - Milestone 2: Finalized target concept and business requirements document. - Deliverable 2: Implementation roadmap and project plan. - Milestone 3: Successful user acceptance test (UAT) of the new process/tool. - Deliverable 3: Acceptance protocols, training materials and project closure report.

- IT project manager activities - Interface/bridging role between business area and technology, requiring solid subject matter knowledge.

A company is seeking support for a project aimed at transparently mapping the overall ordering process in the Portals area. The goal is to combine relevant data sources from order to activation to enable a holistic view of the end-to-end process. This should facilitate the identification of process deviations and optimization potentials. Key project milestones include connecting the required data sources, building self-service reports, and implementing automated alerts for deviations in the process flow. The challenge lies in the technical and professional integration of heterogeneous systems and data flows to ensure consistent monitoring and control of the ordering process. - Analysis and documentation of requirements in the Omnichannel area using requirements management tools and structured collection methods - Professional and technical analysis of existing data sources and ETL processes using database tools - Recording and evaluation of existing interfaces between source and target systems based on technical documentation - Consulting on technical integration of defined data sources into the Celonis environment considering the tools used (Celonis EMS, Data Pool and Data Push API) - Creation of technical queries and representations for process visualization based on provided platform functions (Celonis PQL, Studio) - Use of system-side functions for visualization and analysis of existing business processes (via Celonis Process Explorer) - Professional consulting on technical interfaces, data provision and systemic requirements

A company is looking for an experienced expert in P2P / Purchase to Pay / Procure to Pay to merge the IT finance systems of two entities. The goal of the project is to ensure smooth system integration and optimize processes. In this role, the expert will work closely with relevant stakeholders to analyze requirements, develop solutions, and support the implementation. Main tasks: - Analyze the current IT finance systems of both entities - Develop a strategy for system consolidation - Optimize P2P processes - Support implementation and integration - Collaborate with internal teams and external partners - Ensure compliance with finance and regulatory guidelines

- Customizing / parametrization of the core banking system according to business requirements - Maintaining daily operations - Initial and advanced training of internal staff

- Execution and handling of switching processes (supplier change, new setup, move-in/move-out) - Independent handling of clarification cases with analysis of rejection reasons and follow-up - Support in market communication and related areas (e.g., meter reading, billing) at least at 2nd-level - Ensuring smooth processes within energy industry workflows

A company is looking for an experienced MES consultant specializing in MPDV’s Hydra X to support the system’s expansion to additional sites. The system is already rolled out at one location and should now be scaled further. The role includes supporting the introduction of new features or system versions, implementing system customizations and optimizations based on production requirements, and overseeing the rollout. The consultant will work closely with internal teams and external service providers to ensure quick identification and resolution of MES system issues. - Support the introduction of new system features or versions - Implement system customizations and optimizations based on production requirements - Assist with the rollout to additional sites - Quickly identify and resolve issues in the MES system

We are the Defense Tech Incubator NRW – a new initiative to support innovative startups in the field of defense technology. Our goal: to connect the best minds and technologies with industry, public stakeholders, and investors – creating sustainable innovations for security-relevant applications. To strengthen our operations team, we are looking for an experienced professional from the defense sector – ideally with experience as a Bundeswehr officer or with many years at one of the leading system houses (e.g. Rheinmetall, Hensoldt, MBDA, etc.). - Your tasks: - Identifying, approaching, and securing potential partner companies (including industry, defense, and IT) - Building and maintaining this investor network - Shaping our financing strategy for the incubator - Representing the incubator at industry events, trade fairs, and in networks - Supporting the development of strategic alliances at the state and federal level

On behalf of a leading medical technology company, an experienced technical draftsman or product designer is sought for creating and maintaining technical documentation and design drawings. - **Typical tasks:** - Creating standardized 2D manufacturing drawings and 3D models of parts and assemblies using CAD software. - Detailing and dimensioning designs considering form and position tolerances. - Creating and managing bills of materials and technical documents in the PDM/PLM system (e.g. SAP ECTR). - Implementing change orders on existing drawings and documentation. - Close collaboration with the development and manufacturing departments to ensure producibility. - **Relevant technologies, tools or methods:** - CAD systems: Siemens NX, SolidWorks, CATIA V5, Autodesk Inventor (depending on client system) - PDM/PLM systems: SAP ECTR, Teamcenter, Windchill - Standards: Sound knowledge of relevant ISO and DIN standards for technical drawings, especially in a regulated environment. - ERP systems: SAP S/4HANA - **Typical KPIs or success metrics:** - On-time delivery of drawings and documents. - Error rate in technical documentation (number of required correction loops). - Compliance with internal and external design and documentation standards. - Efficiency in implementing changes (throughput time). - **Special challenges, risks or specifics:** - High demands on accuracy and completeness of documentation due to strict regulatory requirements in medical technology (MDR). - Comprehensive traceability of changes (version control). - Complexity of the parts to be designed (e.g. freeform surfaces, complex assemblies). - Close coordination with various stakeholders (development, procurement, quality assurance, manufacturing). - **Specific deliverables:** - Approval-ready 2D manufacturing drawings and 3D CAD models. - Complete and released bills of materials in the ERP system. - Updated technical product documentation. - Change logs. - **Lessons learned/best practices:** - A clear and standardized template management speeds up the creation process significantly. - Regular alignment meetings with manufacturing can prevent costly errors early on. - Careful maintenance of master data in the PDM/PLM system is the basis for efficient collaboration.

To support the further development of an innovative low-code platform, we are looking for a highly skilled Senior Frontend Engineer. The platform enables customers to build complex business applications with minimal coding effort, where seamless integration into existing SAP system landscapes is critical. - Typical tasks: Designing, architecting, and implementing sophisticated, reusable frontend components and modules with React & TypeScript. Ensuring high code quality through code reviews, unit tests, and E2E tests. Optimizing platform performance for a smooth user experience. Collaborating closely in an agile Scrum team with product owners, UX/UI designers, and backend developers to execute the product roadmap. Connecting SAP backend systems via REST and OData APIs. - Relevant technologies/tools: React, TypeScript, React Hooks, state management (e.g., Redux Toolkit, Zustand), SAP Business Technology Platform (BTP), UI5 Web Components, Storybook, Jest, React Testing Library, Cypress, Git, Jira, CI/CD. - KPIs/success metrics: Time-to-market for new platform features, Lighthouse performance score (>90), component reusability rate, 25% reduction in reported frontend bugs per quarter, user adoption rate. - Key challenges: Striking the right balance between abstraction (low-code) and flexibility (specific customer requirements). Ensuring scalability and maintainability of the frontend architecture in a fast-growing product. Guaranteeing compatibility with diverse SAP system versions. - Deliverables: Implemented and tested features according to user stories, expanded and documented component library (in Storybook), technical architecture documentation, sprint acceptance reports. - Best practices: Applying clean code principles and design patterns (e.g., Atomic Design), building a comprehensive test strategy, proactive communication within the team.

An enterprise is looking for an experienced estimator in civil and road construction who can conduct on-site measurements in Augsburg. Billing is done with the iTwo software. The project's goal is to create accurate and efficient billing for construction projects that meet requirements and standards. The role includes both on-site work for measurements and the possibility to work remotely. - Conduct on-site measurements in Augsburg - Prepare bills using iTwo software - Ensure compliance with construction regulations and standards - Collaborate with site managers and other project stakeholders

A company is looking for a creative POS designer who develops and implements innovative ideas for hospitality spaces. The goal of the project is to increase visibility and brand presence through creative POS solutions. The focus is on developing and visualizing new concepts that comply with CI/CD guidelines and market standards. The role requires close collaboration with a large field sales team as well as small agencies and workshops. - Develop new POS ideas for hospitality spaces (e.g., back counters, bar solutions, illuminated logos, displays) - Visualize and present creative approaches - Collaborate closely with the field team (80 people in sales) - Support POS marketing with a strong focus on visibility and brand presence - Execute projects in line with CI/CD guidelines and market standards - Work with small agencies or workshops for implementation

Our client is a payment service provider. We are looking for a Project Manager Payment Services (m/f/d) - Clearing Girocard and Direct Debit Transactions at the POS. Responsibilities: - Designing and building an external clearing and payment service provider outside the client organization - Shaping and implementing clearing processes – including contract management with involved banks, debt collection agencies and transaction insurers - Establishing and setting up risk and compliance processes in the area of payment clearing - Independently developing, managing and continuously supporting the relevant services

The client runs the Ad Manager, a self-service portal for business customers to book and manage advertising products on the GMX and WEB.DE email portals. The Ad Manager is already live and serves as the central platform for campaign management in the B2B sector. There is currently a separate B2B portal called the trusted Dialog Manager, whose features are to be merged into the Ad Manager. Project goal The goal is the technical and functional enhancement of the Ad Manager with features from the trusted Dialog Manager. In the first step, a unified login system will be implemented. Building on that, existing trusted Dialog features will be gradually migrated and become centrally available in the Ad Manager. Since the trusted Dialog Manager was not previously a self-service tool, this integration also significantly improves user-friendliness and accessibility. The focus of this call for tenders is especially on frontend development (Angular, CSS, HTML). Scope of services - Unified Login System: Integration of trusted Dialog features into the Ad Manager via a central authentication mechanism. - Domain Overview Page: Development of an overview page with DKIM details, logo/avatar preview, and status information (active, inactive, ready for completion). - Auth Code Creation: Development of a function to generate time-limited authentication codes for tagging test emails. - Overlay Testmail Intro: Development of an overlay as a step-by-step guide for sending test emails. - Software Design: Incorporating current Angular best practices to optimize the codebase in terms of structure, reusability, and maintainability.

Management of a strategic digitization project in a hospital network, e.g. implementing a new HIS or a patient record (ePA) according to KHZG. - **Typical responsibilities:** - Overall responsibility for project planning, control, and monitoring (time, budget, quality). - Management of the interdisciplinary project team. - Requirements, risk, and stakeholder management. - Planning and management of change management and rollouts. - Ensuring compliance with regulatory requirements (KHZG, GDPR). - **Relevant technologies, tools & methods:** - HIS systems (Orbis, iMedOne), ePA solutions. - Standards: HL7, FHIR. - Methods: PRINCE2, PMI/PMBOK, agile/hybrid. - Tools: MS Project, Jira, Confluence. - **Typical KPIs & success metrics:** - KHZG compliance, user adoption rate (>85%), process efficiency, milestone adherence. - **Key challenges & risks:** - High process complexity, intense stakeholder management, interoperability, data security. - **Deliverables:** - Project plan, status reports, requirements specification, change concept, cutover plan, project closure report.

To support projects in energy infrastructure, we are looking for a freelance electrical engineer specializing in high and extra-high voltage as a Primary Planner (m/f/d). Projects include grid connections for generation plants (especially wind and solar farms) as well as new construction and upgrades of substations. - Typical tasks in this role:** - Developing primary-technical concepts and layouts for air- and gas-insulated high and extra-high voltage switchgear (AIS/GIS) from 110 kV to 380 kV. - Designing and sizing primary equipment (circuit breakers, disconnectors, instrument transformers, transformers, etc.). - Creating single-line diagrams, overview and arrangement drawings. - Performing short-circuit and load flow calculations as well as sizing grounding systems and lightning protection. - Technical coordination and clarification with clients, grid operators, authorities, and suppliers. - Preparing technical specifications and tender documents for primary equipment. - Coordinating with other disciplines such as secondary technology, civil engineering, and control systems. - Supporting commissioning and acceptance of the installations. - Relevant technologies, tools or methods:** - Planning software: AutoCAD, Primtech, REVIT, EPLAN. - Calculation tools: PowerFactory (DIgSILENT), NEPLAN, or manufacturer-specific tools. - Standards & regulations: VDE-AR-N 4120 (TAR High Voltage), IEC standards, EN standards. - Project management tools: MS Project, Jira. - BIM (Building Information Modeling) in plant engineering. - Typical KPIs or success metrics:** - Planning quality: Number of required plan changes after approval < 5%. - On-time delivery: Meeting planning milestones according to the overall project schedule. - Cost efficiency: Staying within budget for the planned primary equipment. - Technical compliance: Successful acceptance of the installation by the grid operator without primary-technical issues. - Interface management: Smooth coordination, measured by the number of delays in other disciplines caused by planning errors. - Key challenges, risks or specifics:** - High complexity and safety requirements in high and extra-high voltage areas. - Strict adherence to grid connection guidelines (TAR) of the respective grid operators. - Long lead times and price fluctuations for primary-technical major components. - Coordination in tight spaces, especially during upgrades in existing installations. - Increasing requirements due to integration of renewable energy (e.g. reactive power management, FRT behavior). - Ensuring physical safety and occupational health when planning. - Concrete deliverables:** - Approval-ready primary-technical planning documents (layouts, views, sections). - Final single-line diagrams and overview schematics. - Technical calculation reports (e.g. short-circuit strength, grounding). - Prepared bills of quantities and technical specifications for procurement. - Minutes from technical coordination meetings. - Revision documents and as-built documentation.

A company is seeking support for carrying out the engineering of energy generation and consumption plants and their connection to the transmission and/or distribution grids of network operators in Germany and abroad. The project includes both existing plants and those under development, such as power plants, consumer installations, and hybrid systems like battery installations. The goal is to plan, coordinate, and implement grid connections efficiently. Main tasks: - Managing approval processes for grid connections at the respective voltage level - Preparing technical documents for grid connection requests - Creating grid connection applications, including technical documentation for network operators - Technical engineering for grid connection concepts - Designing extra-high, high, and medium-voltage switchgear and substations - Basic and detailed engineering, including tender documents and specifications - Developing technical standards to implement quality requirements - Control and coordination tasks within project execution - Consulting and coordination for quality assurance measures - Project management in line with technical regulations and project management strategies - Advice on contract management, e.g., grid connection contracts - Coordinating processes and carrying out on-site construction support measures - Developing retrofit concepts for conventional power plants, hydropower plants, and other installations