A company is looking for an experienced MES consultant specializing in MPDV’s Hydra X to help expand the system to more sites. The system is already live at one location and now needs to be scaled further. The role includes supporting the introduction of new features or system versions, implementing system customizations and optimizations based on production requirements, and overseeing the rollout. The consultant will work closely with internal teams and external service providers to quickly identify and resolve issues in the MES system. - Support the introduction of new features or system versions - Implement system customizations and optimizations based on production requirements - Assist with rolling out to additional sites - Quickly identify and resolve issues in the MES system

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact for electrical commissioning issues on-site, navigating complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary, ensuring clear communication with stakeholders. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: - If blame is justified → propose and implement a solution. - If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

A company is seeking an experienced Electrical Commissioning Engineer to support an industrial/utility project in Narva, Estonia. The role involves acting as the first point of contact on-site for electrical commissioning issues, reviewing complex documentation, and resolving design and installation challenges, particularly from third-party packages. The engineer will evaluate faults, propose solutions, and defend the client's position when necessary. Clear communication with stakeholders and independent client-side representation are key aspects of this role. - Act as the first point of contact on-site for electrical commissioning issues. - Review and navigate complex documentation related to electrical systems. - Identify and resolve design and installation issues, especially from third-party packages. - Handle MCCs, generic point lists, and interface mismatches. - Evaluate responsibility for faults: If blame is justified → propose and implement a solution. If blame is unjustified → defend the client's position. - Represent and communicate problems clearly to relevant stakeholders.

A company is looking for a specialist site manager in electrical engineering as well as a specialist site manager for control systems (Siemens T3000) for a demanding project. The goal of the project is the technical supervision and control of the control system interfaces of the existing plant during the integration of the new plant, as well as ensuring quality and contract compliance during the construction and commissioning phase. The role requires intensive coordination and monitoring of interfaces with construction planning due to the size of the project. The site manager will work closely with control system specialists, planners, experts, and contractors to ensure the successful implementation of the project. Main responsibilities: - Technical supervision of the control system interfaces of the existing plant during the integration of the new plant - Technical management of control system specialists, planners, experts, and contractors - Creation of discipline-specific and project phase–dependent documents - Participation in project meetings and negotiations - Technical management of quality assurance and quality control during the construction and commissioning phase - Advising on control system commissioning - Technical coordination with planning engineers on quality monitoring tasks - Monitoring contract compliance and conducting quality inspections - Participation in safety meetings and implementation of measures to address identified deficiencies

For an internationally active special machine manufacturer, an experienced PLC programmer is sought to implement demanding automation projects. The focus is on new programming and commissioning of controllers. - Typical tasks: development, testing and documentation of PLC software for new systems with Siemens SIMATIC S7 (TIA Portal) and/or CODESYS V3. Creation and customization of HMI visualizations (e.g. with WinCC Unified, TwinCAT HMI). On-site commissioning of machines and systems at the customer (incl. I/O checks, configuration of fieldbus systems such as Profinet/EtherCAT, functional tests). Systematic error analysis and optimization of existing systems. Technical support for customer service. - Relevant technologies/tools: Siemens TIA Portal, SIMATIC S7-1500, CODESYS V3, Beckhoff TwinCAT, WinCC, various fieldbus configurators, EPLAN P8 (reading electrical diagrams). - KPIs/success metrics: adherence to development and commissioning schedules, reduction of commissioning time through high software quality, machine cycle time and availability (OEE), customer satisfaction after commissioning. - Special challenges: integration of hardware and software components from different manufacturers. Working under time pressure during on-site commissioning. Ensuring functional machine safety (safety PLC) according to standards (e.g. ISO 13849-1). - Deliverables: fully functional, fully documented PLC programs, final HMI projects, signed commissioning and acceptance reports, creation or update of operating manuals. - Best practices: structured programming according to standards (e.g. IEC 61131-3), modular and reusable software blocks, consistent code versioning (e.g. in Git).

A company is looking for a Siemens PLC Programmer to support a hybrid setup in Siegen. The project focuses on programming and optimizing Siemens PLC systems, particularly within the steel industry. The role requires expertise in S120 and G120 servo drives. The ideal candidate should live close to Siegen to facilitate on-site work when required. Key responsibilities: - Programming and optimizing Siemens PLC systems. - Working with S120 and G120 servo drives. - Collaborating with the team to ensure smooth operations in a hybrid setup. - Troubleshooting and resolving technical issues. - Ensuring compliance with industry standards and safety regulations.

- Construction management for the installation of electrical systems in the context of a grid connection project - Ensuring compliance with budget, time and quality targets as well as all relevant legal requirements - Reviewing technical documents such as construction plans, material lists and performance certificates - Coordinating and communicating with subcontractors, suppliers and project stakeholders - Interface management and ensuring a smooth project process

A company is looking for an experienced technical project manager in the district heating sector. The project’s goal is to plan and construct district heating pipelines across all service phases according to HOAI and to take on complex project tasks. The project manager will play a key role in managing and coordinating projects, working closely with engineering firms, municipalities, authorities, and internal contacts. The role includes developing and optimizing planning options to maximize project efficiency and sustainability. The project manager will also continuously improve technical planning guidelines and processes, conduct technical-economic analyses, develop scenarios, and create concepts. Another focus is budgeting for network investments in the heating sector in close coordination with central controlling, as well as performing network calculations. - Planning and construction of district heating pipelines across all HOAI service phases. - Managing and coordinating projects in collaboration with engineering firms, municipalities, authorities, and internal contacts. - Developing and optimizing planning options to increase efficiency and sustainability. - Supporting the improvement of technical planning guidelines and processes. - Conducting technical-economic analyses and developing scenarios and concepts. - Preparing budget plans for network investments in the heating sector. - Performing network calculations.

A company is seeking support for carrying out the engineering of energy generation and consumption plants and their connection to the transmission and/or distribution grids of network operators in Germany and abroad. The project includes both existing plants and those under development, such as power plants, consumer installations, and hybrid systems like battery installations. The goal is to plan, coordinate, and implement grid connections efficiently. Main tasks: - Managing approval processes for grid connections at the respective voltage level - Preparing technical documents for grid connection requests - Creating grid connection applications, including technical documentation for network operators - Technical engineering for grid connection concepts - Designing extra-high, high, and medium-voltage switchgear and substations - Basic and detailed engineering, including tender documents and specifications - Developing technical standards to implement quality requirements - Control and coordination tasks within project execution - Consulting and coordination for quality assurance measures - Project management in line with technical regulations and project management strategies - Advice on contract management, e.g., grid connection contracts - Coordinating processes and carrying out on-site construction support measures - Developing retrofit concepts for conventional power plants, hydropower plants, and other installations

An EPC consultant is looking for an experienced site manager (mechanical) to oversee a biogas plant project. The goal of the project is to supervise construction and ensure mechanical work meets project requirements. In this role, you will take responsibility for construction supervision and coordinate mechanical work on site. You will work closely with other project stakeholders to ensure schedules, quality standards and safety regulations are met. - Supervision of mechanical construction work at the biogas plant - Ensuring adherence to schedules and quality standards - Coordination of subcontractors and suppliers - Conducting regular site inspections and reporting - Assisting in resolving technical challenges on site - Compliance with safety regulations and environmental standards

A company is looking for an experienced expert with in-depth knowledge of License Manager, Inventory Server, and Integration Manager. The goal of the project is to optimize existing systems, integrate them, and ensure all processes run smoothly and efficiently. In this role, the expert will work closely with internal teams to analyze requirements, implement solutions, and monitor the systems. Key responsibilities: - Analyzing and optimizing existing systems (License Manager, Inventory Server, Integration Manager) - Integrating new processes and tools - Collaborating with internal teams on requirements analysis - Ensuring system efficiency and security - Documenting and training the teams

A company is looking for an experienced project manager with a civil engineering background for the power plant or energy industry. The goal of the project is to lead the planning, coordination and implementation of construction projects in the energy and power plant sector. The role requires close collaboration with interdisciplinary teams to ensure that projects are completed on time and within budget. It is explicitly stated that construction managers are not being sought. Main tasks: - Leading and monitoring construction projects in the power plant or energy industry - Coordinating between various departments and external partners - Ensuring compliance with safety and quality standards - Creating and tracking project plans and budgets - Identifying and solving technical challenges - Reporting to stakeholders and management

To support projects in energy infrastructure, we are looking for a freelance electrical engineer specializing in high and extra-high voltage as a primary planner (m/f/d). The projects include grid connection of generation plants (especially wind and solar parks) as well as new construction and conversion of substations. - Typical tasks in this role:** - Developing primary-technical concepts and layouts for air- and gas-insulated high and extra-high voltage switchgear (AIS/GIS) from 110 kV to 380 kV. - Designing and sizing primary equipment (circuit breakers, disconnectors, instrument transformers, transformers, etc.). - Creating single-line diagrams, one-line overview and arrangement drawings. - Performing short-circuit and load flow calculations as well as sizing grounding systems and lightning protection. - Technical clarification and coordination with clients, grid operators, authorities, and suppliers. - Preparing technical specifications and tender documents for primary equipment. - Coordinating with other trades such as secondary equipment, civil engineering, and control systems. - Supporting commissioning and handover of the installations. - Relevant technologies, tools or methods:** - Planning software: AutoCAD, Primtech, REVIT, EPLAN. - Calculation tools: PowerFactory (DIgSILENT), NEPLAN, or vendor-specific tools. - Standards & regulations: VDE-AR-N 4120 (TAR High Voltage), IEC standards, EN standards. - Project management tools: MS Project, Jira. - BIM (Building Information Modeling) in plant engineering. - Typical KPIs or success metrics:** - Planning quality: Number of plan revisions after approval < 5%. - On-time delivery: Meeting planning milestones according to the overall project schedule. - Cost efficiency: Adhering to budget targets for planned primary equipment. - Technical compliance: Successful acceptance of the installation by the grid operator without primary-technical objections. - Interface management: Smooth coordination, measured by the number of delays in other trades caused by planning errors. - Key challenges, risks or specifics:** - High complexity and safety requirements in the high and extra-high voltage range. - Need for precise compliance with grid connection guidelines (TAR) of the respective grid operators. - Long delivery times and price fluctuations for large primary-technical components. - Coordination in tight spaces, especially during conversions on existing sites. - Increasing requirements from renewable energy integration (e.g. reactive power management, FRT behavior). - Ensuring physical safety and occupational health and safety in planning. - Concrete deliverables:** - Approval-ready primary-technical planning documents (layouts, views, sections). - Final single-line diagrams and overview schematics. - Technical calculation reports (e.g. short-circuit strength, grounding). - Prepared bills of quantities and technical specifications for procurement. - Minutes of technical coordination meetings. - Revision documents and as-built documentation.

A company is looking for an experienced Technical Writer responsible for creating and managing datasheets, product brochures and catalogs. These documents are crucial for sales, legally binding and part of internal quality assurance. The product brochures present key product features and customer benefits, while the datasheets contain detailed specifications. The role involves independently managing and overseeing all correction and review processes through to final approval, as well as ensuring the defined quality and release processes according to company guidelines. In addition, the final data must be archived in the relevant systems such as the Promo Office database, PDM and internet CMS. - Creation of datasheets, product brochures and catalogs according to specifications. - Preparation of data for print production and ISO-compliant archiving in the product management system. - Management of versioned documents for print production and online publication. - Ensuring the defined quality and release processes. - Archiving final data in the relevant systems.

Project description As part of the implementation and optimization of the **Multi Domain Orchestration and Inventory (MDOI)** tool in the mobile transport domain (B2X), the focus is on planning, setup, commissioning, management, and optimization of several thousand fixed and mobile network devices. The application allows the selection and configuration of suitable devices and technologies for their efficient use to achieve maximum network coverage and customer satisfaction. Efficiently managing these projects and processes while increasing automation requires the use of the MDOI software solution. Description of services without personal reference - **IT Project Management**: Creating software rollout and migration plans for the application's two-month releases of MDOI, based on Blueplanet, considering all relevant dependencies using JIRA and stakeholder management - **Design Management**: Planning and creating all relevant designs, as well as reviewing them in the Multi Domain Orchestration and Inventory (MDOI) tool for the transport networks area, as an implementation description of the requirements using JIRA and Confluence - **Stakeholder Management**: Developing and executing communication measures for software changes based on the created designs, checking whether the requirements are fully covered by the designs, including preparing documentation for management using Microsoft Outlook, Microsoft Teams, and JIRA

A company is looking for an experienced Senior Solution Architect for a project that involves connecting Deutsche Bahn AG’s Identity and Access Management system (IAM) to the SAP landscape under SAP S/4 Hana. The IAM system, DeBI – Deutsche Bahn Identity, manages digital identities and access to corporate applications and supports compliance with security policies. As part of the Argo subproject, the integration of the IAM system (based on One Identity Manager) with the SAP landscape will take place. The goal of the project is to create technical and functional concepts, coordinate requirements, moderate workshops, and drive technology strategies and innovations. - Create technical concepts as implementation templates for development in One Identity Manager (OIM) - Provide functional support in creating functional concepts - Coordinate with the functional design regarding described requirements - Estimate effort for technical solutions in the project - Moderate workshops on technical architecture topics - Conduct reviews of design, code, and tests - Drive and promote the technological strategy, knowledge sharing, and standardization in the project

A company is seeking support for a project aimed at transparently mapping the overall ordering process in the Portals area. The goal is to combine relevant data sources from order to activation to enable a holistic view of the end-to-end process. This should facilitate the identification of process deviations and optimization potentials. Key project milestones include connecting the required data sources, building self-service reports, and implementing automated alerts for deviations in the process flow. The challenge lies in the technical and professional integration of heterogeneous systems and data flows to ensure consistent monitoring and control of the ordering process. - Analysis and documentation of requirements in the Omnichannel area using requirements management tools and structured collection methods - Professional and technical analysis of existing data sources and ETL processes using database tools - Recording and evaluation of existing interfaces between source and target systems based on technical documentation - Consulting on technical integration of defined data sources into the Celonis environment considering the tools used (Celonis EMS, Data Pool and Data Push API) - Creation of technical queries and representations for process visualization based on provided platform functions (Celonis PQL, Studio) - Use of system-side functions for visualization and analysis of existing business processes (via Celonis Process Explorer) - Professional consulting on technical interfaces, data provision and systemic requirements

A company is looking for an experienced site manager with switching authorization for 110-kV and 220-kV systems who specializes in substations. The goal of the project is to oversee and manage construction work related to high-voltage substations, ensuring compliance with safety standards and project schedules. The role includes leading on-site teams, coordinating with stakeholders, and ensuring the proper execution of electrical switching operations. Main tasks: - Oversee construction work at substations. - Ensure compliance with safety regulations and standards. - Coordinate with project teams and external stakeholders. - Perform electrical switching operations for 110-kV and 220-kV systems. - Manage project schedules and delivery dates. - Conduct quality checks and ensure proper documentation.

A company is looking for an experienced network and project manager who brings expertise in connecting devices and their interfaces as well as solid knowledge of modern networking technologies. The project's goal is to optimize and further develop network solutions, especially in enterprise WLAN and RADIUS/EAP-TLS. The candidate will play a key role in project and team management, preferably in an agile environment, and will ensure cross-team coordination. - Developing and implementing solutions for connecting devices and their interfaces (HTTP/REST) - Optimizing and managing enterprise WLAN/RADIUS/EAP-TLS networks - Leading and directing projects and teams, preferably in an agile environment - Coordinating between different teams and stakeholders - Applying and advancing modern networking technologies such as IEEE 802.11/WiFi

As part of developing the reporting and analytics capabilities in Business Continuity Management (BCM), the existing BI landscape is being migrated from Tableau to Microsoft Power BI. The goal is to build a future-proof, scalable data warehouse that provides a consolidated data foundation for company-wide analyses. At the same time, existing reporting functionalities and automations in the HiScout standard software should be analyzed and adjusted to meet new requirements. - **Consulting**: Advising on the architecture and setup of a data warehouse based on Microsoft technologies (SQL Server, Power BI) - **Migration**: Advising on migrating existing reports and dashboards from Tableau to Power BI - **Data Analysis**: Analyzing existing data sources and designing suitable ETL workflows - **Automation**: Connecting and automating data sources - **Requirements Analysis**: Conducting requirements analysis and creating technical concepts for reporting adjustments in HiScout - **Reporting**: Implementing and testing reporting adjustments in HiScout - **Documentation**: Quality assurance and documentation of work performed - **Training**: Advising on creating training materials and transferring know-how to internal teams